Fine Patterning and Characterization of Gel Films Derived from Methyltriethoxysilane and Tetraethoxysilane

Pregrooves of 1.6 µm pitch for optical data storage have been embossed successfully by pressing a stamper against x CH₃Si(OC₂H₅)₃(100 - x )Si(OC₂H₅)₄-derived gel films (60 ≤ x ≤ 100 mol%) on glass-disk substrates of 130 mm diameter. When x is <40 mol%, the resultant films are too hard to emboss patterns uniformly. The shrinkage of the patterns is ∼4% for all the films when 60 lessthan equal to x lessthan equal to 100 mol%, even after heat treatment at 350°C, so that the nearly net negative shape of the stamper is preserved. The methyl groups in the films decompose at temperatures from 500° to 600°C.     

Structural Changes of Scandia-Doped Zirconia Solid Solutions: Rietveld Analysis and Raman Scattering

Powder X-ray diffractometry (XRD) and Raman scattering measurements were used to study the structural changes of compositionally homogeneous metastable ZrO₂ solid solutions induced by ScO_1.5 doping. The crystal structures of monoclinic, tetragonal, cubic, and rhombohedral (Sc₂Zr₇O₁₇, ß-phase) solid-solution phases have been refined by using the Rietveld analysis of the XRD data at room temperature of arc-melted ZrO₂- X ScO_1.5 ( X = 0, 2, …, 20, and 22 mol%) samples. The results can be interpreted as indicating that the structures of the monoclinic and tetragonal phases approach those of the tetragonal and cubic phases, respectively, by ScO_1.5 doping. Raman scattering, as well as XRD, was useful to investigate the phase assemblage. Moreover, we could obtain Raman spectra of the ß-phase probably for the first time.     

Structural Investigation of 95(0.6Li2S0.4SiS2)5Li4SiO4 Oxysulfide Glass by Using X-ray Photoelectron Spectroscopy

S2 p and O1 s photoelectron spectra were obtained for the 95(0.6Li₂S0.4SiS₂)5Li₄SiO₄ oxysulfide glass prepared by twin-roller quenching. A four-peak deconvolution technique was used to separate the S2 p peak of the glass into the components of bridging and nonbridging sulfur atoms. As a result of the deconvolution of the S2 p peak, we found that ∼92% of the sulfur atoms were present as nonbridging atoms. The O1 s peak of the glass was separated into two components: bridging and nonbridging oxygen atoms. This separation of the O1 s peak indicated that ∼85% of the oxygen atoms were present as bridging oxygen atoms.     

Preparation method for supported metal catalysts using w/o microemulsion: Study on immobilization conditions of metal particles by hydrolysis of alkoxide

It was previously found that the silica-supported rhodium catalyst prepared using water-in-oil microemulsion had rhodium particles partly, or wholly, embedded in silica. In this work, consequently, we investigated the effect of hydrolysis conditions of tetraethylorthosilicate, employed as the source of silica, on the atomic ratio of surface rhodium in contact with the gas phase, to total surface rhodium of nanoparticles. This ratio is denoted as R in this paper. R became higher when the catalyst was prepared under the following hydrolysis conditions: a shorter hydrolysis time and a smaller amount of tetraethylorthosilicate. On the other hand, R showed the minimum value when the water content in the preparation solution was 33 vol%. From these results, it is demonstrated that it was important to form silica as early as possible in hydrolysis of TEOS in order to increase R values. In addition, the effect of R on the catalytic behavior in CO hydrogenation was investigated. At R values below 30%, the turnover frequencies increased with a decrease in R.     

Development of high performance Raney Cu-based catalysts for methanol synthesis from CO2 and H2

Catalytic hydrogenation of CO₂ into methanol has been investigated over Raney Cu-based catalysts. The Raney catalysts leached in NaOH/ZnO solutions showed high activities and selectivities for methanol synthesis. The deposition of Zn on the surface of Cu particles increased the surface area and the specific activity of Raney Cu–M. Raney Cu–Zr developed was significantly more active than a commercial catalyst.     

Studies on syntheses and permeabilities of special polymer membranes: 30. Ultrafiltration and dialysis characteristics of cellulose nitrate-poly(vinyl pyrrolidone) polymer blend membranes

The ultrafiltration and dialysis characteristics of the semipermeable polymer blend membranes obtained from cellulose nitrate, poly(vinyl pyrrolidone), and N,N-dimethyl formamide were investigated under various conditions. The water content fraction and the ultrafiltration rate were dependent on the poly(vinyl pyrrolidone) content in the membranes, and the strengths were governed by the cellulose nitrate content in the polymer blend. If the pore radius in the membranes, calculated according to the Hagen-Poiseuilli equation for capillary model, was identical, the water content in each membrane was not identical. It was found that urea molecules broke very weak hydrogen bonds of the bound water in the membrane, but sodium chloride did not, also, the diffusion of urea through the membrane was more rapid than that of sodium chloride. The ratio of the membrane diffusion coefficient to the ultrafiltration rate was explained qualitatively by the capillary model, however, when the bound water in the water content fraction was considered, this ratio showed better agreement with the model.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

Characteristics of surface roughening during plane strain compression of polycrystalline iron

Roughening behavior of the free surface of polycrystalline iron during plane strain compression is investigated experimentally. The changes in the shape of the free surface, which is roughened during plastic deformation, are observed in the three-dimensions. It is found that the mountains and the valleys of the roughened shape tend to elongate in the constrained direction for the specimen with isotropic grain shape. The shapes of the roughness curves in the loading direction and in the constrained direction are compared. The normalized height distribution of the roughness curve in the constrained direction is symmetric, while that of the roughness curve in the loading direction is asymmetric and positively skew during plane strain compression. Based on a simple simulation of the roughness curves by a random midpoint displacement method, this difference is supposed to be caused by the constraint of the material flow under plane strain condition.     

Intake of different eicosapentaenoic acid-containing lipids and fatty acid pattern of plasma lipids in the rats

The ethyl ester of eicosapentaenoic acid (EPA) is the only pure EPA-containing lipid available in bulk for oral administration. However, there is doubt as to whether EPA ethyl ester can efficiently increase the plasma levels of EPA in comparison with the ability of other kinds of EPA-containing lipids to do so. Therefore, two other kinds of EPA-containing lipids were prepared to study the efficiency of oral administration of those lipids for increasing the EPA content in plasma phospholipids and cholesteryl esters. EPA-containing lipids which were investigated were [A], 1,2,3-trieicosapentaenoyl-glycerol, [B] 2-eicosapentaenoyl-phosphatidylcholine and [C] ethyl ester of EPA. An adjusted amount of lipids [A], [B] and [C] was administered to rats through a gastric tube for 4 days (the first experiment) or for 10 days (the second experiment), and the fatty acid composition of plasma phospholipids and cholesteryl esters was determined. In the first experiment, there were no significant differences in the efficiency for increasing EPA levels in either phospholipids or cholesteryl esters among the lipids. In the second experiment, the EPA levels of both plasma phospholipids and cholesteryl esters of rats administered ethyl ester of EPA were significantly higher than those of rats administered 2-eicosapentaenoyl-phosphatidylcholine. The EPA levels of the rats administered 1,2,3-trieicosapentaenoylglycerol were between the levels of the two groups mentioned above, but the differences in the EPA levels were not significant. Although an ethyl ester-type molecule is not a naturally occurring lipid, ethyl ester of EPA is equal to 1,2,3-trieicosapentaenoyl-glycerol and appears to be superior to 2-eicosapentaenoyl-phosphatidylcholine as to the efficiency for increasing EPA levels in total plasma phospholipids and plasma cholesteryl esters.