Hot-water treatment of sol–gel derived SiO2–TiO2 microparticles and application to electrophoretic deposition for thick films

SiO₂–TiO₂ spherical microparticles of about 0.7 μm in diameter were prepared by the sol–gel method. Anatase nanocrystals were formed in the microparticles and their specific surface area was increased after a hot-water treatment at 90 °C. From the changes in the concentration of I₂ photocatalytically generated from KI aqueous solution, the activity of the SiO₂–TiO₂ microparticles was found to increase with increasing the hot-water treatment time. Particulate, thick films were electrophoretically deposited on indium tin oxide (ITO)-coated glass substrates using the anatase nanocrystal-precipitated SiO₂–TiO₂ microparticles. The thickness of the electrophoretically deposited particulate film increased to be approximately 10 μm with an increase in applied voltage. The resultant thick film showed a high photocatalytic activity.     

Parallel processing circuit of line image using neuristor

A simultaneous detecting circuit system of centers and lengths of some lines in one dimension is presented applying an electronic circuit model of the nervous axon with respect to signal transmission. This model consists of series of one basic section, and has functions of Neuristor. The circuit system has a paralell processing function. It is constructed by three layers. In the first layer each visual signal of lines is changed to electric pulse signal. In the second layer edges of each line are detected, and in the third layer these detected signals are converted into voltages which correspond to lengths of the lines. These functions were confirmed experimentally using its hardware.     

Dimethyl Fumarate Induces Apoptosis via Inhibition of NF-κB and Enhances the Effect of Paclitaxel and Adriamycin in Human TNBC Cells

Triple-negative breast cancer (TNBC) has the poorest prognosis of all breast cancer subtypes. Recently, the activation of NF-κB, which is involved in the growth and survival of malignant tumors, has been demonstrated in TNBC, suggesting that NF-κB may serve as a new therapeutic target. In the present study, we examined whether dimethyl fumarate (DMF), an NF-κB inhibitor, induces apoptosis in TNBC cells and enhances the apoptosis-inducing effect of paclitaxel and adriamycin. Cell survival was analyzed by the trypan blue assay and apoptosis assay. Protein detection was examined by immunoblotting. The activation of NF-κB p65 was correlated with poor prognosis in patients with TNBC. DMF induced apoptosis in MDA-MB-231 and BT-549 cells at concentrations that were non-cytotoxic to the normal mammary cell line MCF-10A. Furthermore, DMF inhibited NF-κB nuclear translocation and Survivin, XIAP, Bcl-xL, and Bcl-2 expression in MDA-MB-231 and BT-549 cells. Moreover, DMF enhanced the apoptosis-inducing effect of paclitaxel and adriamycin in MDA-MB-231 cells. These findings suggest that DMF may be an effective therapeutic agent for the treatment of TNBC, in which NF-κB is constitutively active. DMF may also be useful as an adjuvant therapy to conventional anticancer drugs.     

Slc25a39 and Slc25a40 Expression in Mice with Bile Duct Ligation or Lipopolysaccharide Treatment

SLC25A39/40, involved in mitochondrial GSH (mGSH) import from the cytoplasm, is essential for protection against oxidative stress and mitochondrial dysfunction. We examined the effects of cholestasis, through bile duct ligation (BDL) and lipopolysaccharide (LPS)-induced inflammation in mice, on Slc25a39/40 expression. Additionally, we used human clear cell renal carcinoma (KMRC-1) cells to elucidate the mechanism of regulation of SLC25A39/40 expression in the kidneys after LPS treatment. BDL resulted in a decrease in Slc25a39 mRNA in the liver and a decrease in Slc25a39/40 mRNA and protein in the kidneys. Consequently, there was a significant decrease in mGSH levels in the kidneys of BDL mice compared with those in sham mice. LPS treatment resulted in increased Slc25a40 expression in the kidneys. In KMRC-1 cells, the combination treatment of LPS-RS or FPS-ZM1 with LPS suppressed the LPS-induced increase in SLC25A40, suggesting that SLC25A40 expression could be regulated by the signaling pathway via toll-like receptor 4 and the receptor for advanced glycation end products, respectively. Our findings contribute to understanding the role of mGSH in the maintenance of the mitochondrial redox state. To the best of our knowledge, this is the first study that demonstrates the changes in Slc25a39/40 expression in mice with cholestasis-associated renal injury and LPS-induced inflammation.     

Domain–Specific High–Level Modeling and Synthesis for ATM Switch Prototyping

ATM switch, the core technology of an ATM networking system, is one of the major products in Fujitsu telecommunication business. However, current gate–level design methodology can no longer satisfy its stringent time–to–market requirement. It becomes necessary to exploit high–level methodology to specify and synthesize the design at an abstraction level higher than logic gates. This paper presents our prototyping experience on domain–specific high–level modeling and synthesis for Fujitsu ATM switch design. We propose a high–level design methodology using VHDL, where ATM switch architectural features are considered during behavior modeling, and a high–level synthesis compiler, MEBS, is prototyped to synthesize the behavior model down to a gate–level implementation. Since the specific ATM switch architecture is incorporated into both modeling and synthesis phases, a high–quality design is efficiently derived. The synthesis results shows that given the design constraints, the proposed high–level design methodology can produce a gate–level implementation by MEBS with about 15 percent area reduction in shorter design cycle when compared with manual design.     

Organic–Inorganic Nanohybrids as Novel Thermoelectric Materials: Hybrids of Polyaniline and Bismuth(III) Telluride Nanoparticles

Thermoelectric materials have received much attention recently from the viewpoint of global environmental issues and effective utilization of energy resources. Especially those effective at relatively low temperature, such as below 100°C, which are usually abandoned without use, have become noteworthy recently. From this point of view, organic thermoelectric materials are most attractive, because they could be prepared at low cost and applied in various locations due to their flexibility. We have investigated the thermoelectric properties of organic conducting polymers such as polyaniline, polypyrrole, and polyphenylenevinylene, and succeeded in increasing the thermoelectric performance by selecting dopants, stretching conducting films, etc. Recently we have focused on new systems of organic–inorganic hybrid thermoelectric materials. Herein we present the preparation of a novel system of hybrids of polyaniline and bismuth(III) telluride nanoparticles, starting from bismuth(III) chloride and tetrachlorotellurium by using polyvinylpyrrolidone as a protecting reagent, as well as their thermoelectric properties. The hybrids prepared by this particular method showed much higher thermoelectric performance than the starting organic conducting polymer.     

A multi-port D-R mutator using CCIIs with current followers

A multi-port D-R mutator with new current conveyors (CFCCIIs) as the four-port active element is proposed. Each CFCCII consists of a current follower added to a second-generation current conveyor (CCII). This proposed circuit is a simple configuration using CCIIs, CFCCIIs and grounded capacitances and is applied to higher order high-pass filters. This configuration can realize a superior transmission characteristic, inheriting the characteristic of the conventional LC filter. Since all the passive elements are grounded, the influence of parasitic elements of current conveyors can be reduced with this circuit configuration. As a result, this circuit is considered a suitable configuration for monolithic integration. Results obtained from the SPICE simulations show the realized filters have excellent performance and the circuit is effective.     

Design of low‐power all‐optical networks under the constraint of four‐wave mixing

In this paper, we propose a static lightpath establishment method to design low‐power all‐optical networks under the constraint of four‐wave mixing (FWM). Since the FWM causes nonlinear interchannel crosstalk, it degrades the communication quality of optical signals. The FWM crosstalk effect becomes strong in a fiber as the number of passing optical signals increases. Therefore, we should reduce the number of optical signals passing through the same fiber from the perspective of the FWM. Meanwhile, in order to enhance the power efficiency of optical amplifiers, which are deployed at each optical fiber, it is preferred that multiple optical signals are transmitted in the same fiber. In order to decrease the power consumption while keeping high communication quality, the proposed method statically selects routes, wavelengths, and fibers for each traffic demand, considering the FWM crosstalk effect and the usage efficiency of the optical amplifiers. We show the performance of the proposed method through numerical experiments.