Enhanced degradation in nanocomposites of TiO2 and biodegradable polymer

Nanocomposites of titamium dioxide (TiO2) particles and biodegradable poly (butylene succinate) (PBS) were fabricated by melt-blending using a high-shear extruder. TiO2 particles were highly dispersed in the PBS matrix by high-shear processing, and the addition of TiO2 particles into PBS did not decrease its mechanical strength. The photocatalytic decomposition and biodegradable properties of the nanocomposites were evaluated by UV irradiation or enzymatic degradation methods in vitro. It was found that both the esterase enzyme and UV irradiation decomposed the nanocomposites. Photocatalytic decomposition of PBS clearly depended on the size and dispersibility of TiO2 particles in PBS polymer. Higher dispersibility and smaller size of TiO2 particles were effective on the photocatalytic oxidation of PBS. In addition, decomposition rate under a simultaneous UV irradiation treatment and immersion in an enzyme solution was higher than those under UV irradiation or immersion in an enzyme solution. These results indicate that the nanocomposites can easily be decomposed not only by an enzyme in soil or compost, but also by photocatalytic oxidation of TiO2 under sunlight.     

Computational cavitation flows at inception and light stages on an axial-flow pump blade and in a cage-guided control valve

Cavitation flows induced around an axial-flow pump blade and inside a high pressure cage-type valve are simu-lated by a two-dimensional unsteady Navier-Stokes analysis with the simplest treatment of bubble dynamics.Thefluid is assumed as a continuum of homogeneous dispersed mixture of water and vapor nuclei.The analysis isaimed to capture transient stages with high amplitude pressure change during the birth and collapse of the bubbleespecially at the stage of cavitation inception.By the pump blade analysis,in which the field pressure is moderate,cavitation number of the inception and locations of developed cavitation are found to agree with experimental re-suits in a wide flow range between high incidence and negative incidence.In the valve flow analysis,in which thewater pressure of 5MPa is reduced to 2MPa,pressure change responding to the bubble collapse between the vaporpressure lower than 1 KPa and the extreme pressure of higher than 10~4 KPa is captured through a stable computa-tion.Location of the inception bubble and pressure force to the valve plug is found agree well with the respectiveexperimental features.     

LES analysis of flow and turbulent mixing in an unsteady jet

The flow and mixing process of unsteady jets are fundamentally analyzed by large eddy simulations. The effects of nozzle velocity and turbulence intensity on the turbulent eddy structure and mixing process between the nozzle fluid and ambient fluid were investigated. The results show that a toroidal‐shaped vortex, which emerges around the jet tip, primarily accelerates the entraining flow. Also, increasing the turbulence intensity in the nozzle encourages mixing in the jet without changing the jet‐contour. Furthermore, when the rise‐up time of the initial nozzle velocity is elongated, turbulent mixing is suppressed. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(5): 303–313, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20158     

X-ray absorption near-edge structure study on positive electrodes of degraded lithium-ion battery

18650-type cylindrical cells using LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) and hard carbon as positive and negative electrode material, respectively, were fabricated and degraded by cycle tests. The capacity of the cells remained more than 95% and 85% after cycle tests at 25 and 50 °C, respectively. After the cycle tests, Li-deficient cubic phase was observed on the surface of NMC. This phenomenon should be related to the degradation mechanism of this type of cell.     

Potential of renewable energy sources and its applications in Yakushima Island

A study was carried out to see if the potential of renewable energy sources other than hy droelectric power, such as wind, photovoltaic, solar thermal, biomass and waste energy sources, can meet the current energy consumption in Yakushima. The current electricity consumption can be covered by wind and photovoltaic energy sources. The total potential of wind and photovoltaic energy sources is 5.4 times as much as the current electricity consumption. LP gas and kerosene can be replaced by solar thermal and biogas energy. The potential of plant biomass and municipal waste is not sufficient (approximately one third) to cover the rest of the fossil fuels (gasoline, diesel oil and heavy oil). Also, plant biomass and municipal waste must be converted into fluid form. This shortage can be covered by the po tential of wind and photovoltaic energy sources. We also investigated the possibility of tourism expansion using the potential of wind and photovoltaic energy sources. Taking into account three types of capacity (energy, accommodation and transportation), Yakushima can accept approximately four times as many tourists as the current number of tourists.     

Characterization of the Thermo-Viscoelastic Property of Glass and Numerical Simulation of the Press Molding of Glass Lens

A measurement technique for obtaining the thermo-viscoelastic properties of glass with high accuracy is discussed. An unidirectional compression creep test was employed to measure the relaxation modulus of the glass specimens. The creep function derived from the experimental creep test is approximated by a generalized Voigt model, and then converted into a relaxation modulus expressed by a generalized Maxwell model using the Laplace transform and its inversion. Relaxation moduli and shift factors of the glass specimens BK-7 and TaF-3 were estimated according to the presented procedure, and the accuracy of the relaxation modulus was verified by a numerical demonstration using finite element analysis. A fundamental numerical simulation of the press molding of glass lenses was carried out to illustrate the validity of the thermo-viscoelastic properties obtained by the presented approach. Residual stresses under processing conditions were estimated, and the optimal conditions for residual stress minimization are discussed.     

Mutational analysis of the metabolism of 2,6-naphthalenedisulfonate by Pigmentiphaga sp. NDS-2

The metabolism of 2,6-naphthalenedisulfonate (26NDS) by Pigmentiphaga sp. NDS-2 was analyzed by isolating a mutant (NDS2-002) which slowly grew on a minimal medium containing 26NDS as the sole source of carbon. Liquid chromatography/mass spectrometry (LC/MS) analysis of metabolic intermediates in this strain revealed that 5-sulfosalicylate (5SSA) is accumulated during the degradation of 26NDS. To analyze the lower metabolic pathway, a mutant strain NDS2-008, which could not grow either on 26NDS, 5SSA or gentisate, but could on succinate as the carbon source, was isolated. When the resting cells of NDS2-008 were incubated with 5SSA or gentisate, a substance deduced to be maleylpyruvate (Zhou et al., J. Bacteriol., 183, 700-708, 2001) was commonly detected upon HPLC analysis. These results suggest that Pigmentiphaga sp. NDS-2 degrades 26NDS via 5SSA, gentisate and maleylpyruvate as intermediates.     

Tailored Remote Photochromic Coloration of in situ Synthesized CdS Quantum Dot Loaded WO3 Films

CdS quantum dot (QD) loaded WO₃ films, fabricated by screen printing and short‐time chemical bath deposition (CBD) techniques, have been proven to have an efficient visible‐light‐driven photochromic response. One of the striking features of such a photochromic system is its remote photochromic characteristic. The photogenerated electrons in CdS are injected into WO₃ to cause the color change of WO₃, while CdS does not show any photochromism. Compared to bare WO₃ films, the spectral sensitivity of remote photochromism in the CdS QD loaded WO₃ films is red‐shifted. The onset wavelength for remote, the decoloration time for CdS QD loaded WO₃ films was found to be significantly shorter than that for bare WO₃ films, probably due to their different electron trapping processes. Bandgap excitation in bare WO₃ creates deeply trapped electrons in the bulk, whereas the electrons injected from the QDs are trapped at shallow surface states in the remote photochromic system. The successful tailoring of photochromic coloration employing a simple procedure would provide numerous opportunities for designing photo‐ and electrochromic materials with the optimal architecture and tunable properties.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.