Tyrosine phosphorylation as a convergent pathway of heterotrimeric G protein- and rho protein-mediated Ca2+ sensitization of smooth muscle of rabbit mesenteric artery

1. The aim of this study was to determine whether different signal transduction mechanisms underlie the Ca2+ sensitizing effects of guanosine 5'-O-(3-thiotriphosphate) (GTP(gamma)S) and receptor agonists on beta-escin-skinned smooth muscle of rabbit mesenteric artery. 2. In the homogenate of the beta-escin-skinned arterial strip, C3 exoenzyme of Clostridium botulinum catalyzed the [32P]-ADP-ribosylation of only one protein that had the same molecular mass as the protein detected in Western blots with anti-rho p21 antibody. Pretreatment of preparations with C3 resulted in great inhibition of GTP(gamma)S-induced Ca2+ sensitization, although the effect of GTP(gamma)S at higher concentrations (> or = 30 microM) was not completely blocked by this treatment. In contrast, the enhancement by phenylephrine and histamine, in the presence of guanosine 5'-triphosphate, of the Ca2+-induced contraction was not affected by C3 pretreatment. 3. The protein kinase C (PKC) inhibitors calphostin C and staurosporine completely eliminated the enhancement by phorbol ester 12,13-dibutyrate of the Ca2+-induced contraction. However, these PKC inhibitors had no effect on GTP(gamma)S- and receptor agonist-induced Ca2+ sensitization. 4. The tyrosine kinase inhibitors genistein and tyrphostin 25 caused an irreversible and complete block of the enhancement by GTP(gamma)S of the Ca2+-induced contraction without affecting this Ca2+ contraction. The inactive genistein analogue daidzein did not modify the effect of GTP(gamma)S. The Ca2+ sensitizing effects of phenylephrine and histamine were also blocked by these tyrosine kinase inhibitors. 5. These results suggest that rho p21 predominantly mediates GTP(gamma)S-induced Ca2+ sensitization of beta-escin-skinned smooth muscle of rabbit mesenteric artery, while the Ca2+ sensitizing actions of heterotrimeric G protein-coupled receptor agonists do not involve this small G protein. However, it seems that tyrosine phosphorylation, but not PKC activation, plays an important role in both of the rho p21 protein- and heterotrimeric G protein-mediated Ca2+ sensitization mechanisms.     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Three-dimensional analysis for explosions of a propane-air mixture in cylindrical vessels

A mathematically simple spatial difference method has been applied for analysing three-dimensionally, and for illustrating graphically, the process of the development of a flame after the propane-air stoichiometric mixture is ignited. The calculated results show that the mathematical simulation can well express the process of mixture explosion in cylindrical vessels, and can evaluate the effects of laminar swirl flow on the flame development. It is concluded that the swirl motion deforms the flame front and accelerates the flame enlargement. Described also is a comparison of swirl flame calculation, with and without the centripetal effect caused by the difference in densities between burnt and unburnt gases.List of symbols A, A _f , A _K , A _W area, flame surface area, flame element area, and wall area - b _e heat penetration coefficient - C _d coefficient - C _p molar specific heat at constant pressure - G mass of gas - H cylinder height - h enthalpy and molar enthalpy - L effective length - M _j molecular weight - n, N normal unit vector and normal vector to flame surface - p pressure - q heat input per unit mass - r _c flame center location - r, R radius and vessel radius - R universal gas constant - Re Reynolds number - s _b , s _u flame speed and burning velocity - t time measured from spark-ignition - U _c inward moving velocity of flame center - u _u compression velocity of the unburnt gas just ahead of the flame front - U(u, v, w) velocity vector - v _i , V _i specific volume and volume of region-i - x _j mole fraction of specie-_j - x mass fraction of burnt gas - X(x, Y, z), X(x, r, ) orthogonal and cylindrical coordinate systems - Y _j mass fraction of specie-_j - Y mass fraction of burnt gas - small amount of change - change from the initial state Suffixes ij flame element number - i region or state - j chemical species     

Preparation of zirconia-toughened bioactive glass-ceramics

Bioactive glass-ceramics toughened by tetragonal zirconia polycrystal (TZP) were prepared by hot-pressing mixed powders of the MgO-CaO-P₂O₅-SiO₂ glass and TZP containing 20 to 80% alumina. The bending strength and the fracture toughness of the composite materials were improved compared with those of the material without TZP. These composites showed high bending strengths (400 to 500MPa) and high fracture toughness ( 2.8MPa m^1/2). The existence of a crack deflection mechanism was observed by scanning electron microscopy. After soaking in simulated physiological solution at 100 °C, no phase transformation from tetragonal to monoclinic of TZP in the composites and no degradation in bending strength occurred.     

Selective oxidation of Fe-30Ni alloy in a low-temperature range (433–473 K)

Fe-30Ni alloy specimens were oxidized for 10–240 min at 433–473 K in pure oxygen at a pressure of 1.33×10⁴ Pa. The thickness of oxide films was measured by a multiple-angle-of-incidence ellipsometer. The kinetics of film growth were found to obey a parabolic rate law. The depth-profiling of oxidized surfaces, performed with simultaneous use of Auger electron spectroscopy (AES) and argon-ion sputter-etching technique, reveals that iron component is selectively oxidized and an iron-depeletion zone is formed in the underlying alloy. The thickness of the iron depletion zone increases with increasing oxidation time or oxidation temperature. During surface oxidation of the alloy, the transport rate of iron component in the film is almost equal to the interdiffusion rate in the underlying alloy, indicating the establishment of a steady state. The values of the interdiffusion coefficient, , of the underlying alloy estimated from the depth-composition profiles are more than 10 orders of magnitude as large as the values extrapolated from the lattice diffusion data of the corresponding alloy obtained at high temperature. The enormously large values of may be explained in terms of the vacancy (monovacancy or divacancy)-enhanced lattice diffusion mechanism.     

Feed rate characteristics of a blow tank solids conveyor in transport of granular material

Feed rate characteristics of a blow tank solids conveyor in which the conveying pipe exits at the upper part of the tank are experimentally examined by the use of polyethylene pellets having a large minimum fluidizing velocity. The flow pattern of solid particles in the tank resembles suction flow at the pipe inlet and bears a strong resemblance to that of gravity discharge of solids from an orifice, and there exists a dead solids region on the porous support through which compressed air is blown. Within this region pipe inlet height from the porous support and tank size have no effect on the feed rate. For a given tank, the feed rate increases with an increase in pipe diameter. An empirical equation is proposed to relate these variables.     

Surface active N-acylglutamate: I. Preparation of long chain N-acylglutamic acid

Long chain N-acylglutamic acid was prepared in a high yield by a reaction of glutamic acid with fatty acid chloride in a mixed solvent of water and a water miscible organic solvent such as acetone, methyl ethyl ketone, dioxane, tetrahydrofuran,t-butyl alcohol or cyclohexanone. In this reaction the composition of the mixed solvent influenced the yield of N-acylated glutamic acid and the best yield was obtained when the reaction was carried out in the mixed solvent comprising 30–60% v/v of the organic solvent. Long chain N-acylaspartic acid was also obtained in a high yield by the same method. As the other method to obtain N-lauroyl-D L-glutamic acid, it was examined that N-acyl-α-aminoglutarodinitrile which was obtained by a reaction of α-aminoglutarodinitrile with fatty acid chloride was hydrolyzed with an aqueous alkaline solution. The salts of long chain N-acylglutamic acid are known as the surface active agents that react mildly on the human skin.     

Fabrication of Nonadditive Mica Ceramics by Hot Isostatic Processing

Powder compacts of synthetic mica (fluorphlogopite) encapsulated in a boro–silicate glass tube were isostatically hot–pressed in a Roy–Tuttle–type pressure vessel. Synthetic mica was sintered to a density of 2.60 g/cm³ (91.2% of theoretical density) without additives under 98 MPa of water at 800°C for 45 min.     

Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Synthesis of Metastable Tetragonal (t') Zirconia–Ceria Solid Solutions by the Polymerized Complex Method

Homogeneous metastable tetragonal ( t ') solid solutions of ZrO₂— x mol% CeO₂ ( x = 20 and 50) were successfully synthesized by the organic polymerized complex method. The citric acid-ethylene glycol solution containing Zr and Ce ions was polymerized at about 140°C and then heat-treated at about 350°C to obtain a precursor. The black precursor was heated at 450°C and then fired up to 1300° or 1590°C, resulting in the homogeneous solid solutions.