Thermodynamic modeling of the Au-In-Sb ternary system

The phase diagram of the Au-In-Sb ternary system is of importance in predicting the interface reaction between In-based solders and the Au substrate. Using the calculated phase diagram method and based on experimental data of thermodynamic properties and phase boundaries, the Au-Sb binary system was assessed, and the In-Sb binary system was revised. On the basis of the constituent binary systems, Au-Sb, In-Sb, and Au-In, the Au-In-Sb ternary system was modeled. Several isothermal and vertical sections were calculated, among which the one at 500 K reproduces the experimental diagram well.     

日本移动服务业的过去和将来

分别对日本三代移动通信系统的发展进行了描述。第一代系统致力于实现随时、随地的通话，第二代系统的特征是基于语音的附加服务、低速的移动计算、移动因特网和位置服务，第三代系统将以基于视频的全球范围内高速多媒体服务和移动IT为特征。在未来的后3G系统中，这些服务都将以虚拟永远在线的方式无缝、高速地普遍提供。     

Preparation of CdSSe-ZnS superlattice,SrS, and CdSSe-SrS superlattice by hot-wall epitaxy,and applications to electroluminescent devices

CdSSe (manganese-doped, E_g = 1.9–2.5 eV, lattice constant a = 6.05–5.8A)-ZnS (Eg = 3.56 eV, a = 5.41A) superlattices, SrS (cerium-doped, E = 4.4 eV, a = 6.02A) layers, and CdSSe-SrS (cerium-doped) superlattice layers nave been prepared by hot-wall epitaxy, and the properties and the electroluminescent device characteristics of the active layers are reported. For the superlattices with ZnS, the maximum luminance was 800 cd/m² at an applied sinusoidal voltage (V_o-p = 200 V) with frequency 1kHz, and the wavelength of the spectral peak was 610 nm due to the large strain caused by the lattice mismatch (8–15%) between the CdSSe and ZnS layers. The maximum luminance and Comisson Internationale de Enluminure (CIE) chromaticity of CdS(Mn)-ZnS superlattices and CdSe(Mn)-ZnS superlattice devices were 557cd/m² and (x,y) = (0.58,0.41) and 982 cd/m² and (0.61, 0.38), respectively. For superlattices with SrS, the maximum luminance of the device with the SrS (cerium-doped) active layer was nearly 700 cd/m² at a voltage of 340V. Blue electroluminescent emission was observed in the photon wavelength region less than 450 nm, due to carriers dropping into the quantum wells of the device with the CdSSe-SrS superlattice active layer.     

Large nonlinear optical effect in an InGaAs/InAlAs multiquantum well waveguide

All-optical refractive nonlinearity in a passive InGaAs/InAlAs multiquantum well waveguide is evaluated for TE and TM modes at 1.55 mu m wavelength and room temperature. A quarter wavelength change in the optical path length is observed at an input pump light power of 6.5 mW for 1.47 mu m wavelength in a 960 mu m long device. Nonlinear refractive index n/sub 2/ is evaluated to be -1.2*10/sup 6/ and -0.5*10-6cm/sup 2//W for the TE and the TM modes, respectively.<>     

Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.     

DC voltage control strategy for a five-level converter

This paper describes a control method for a three-phase five-level diode-clamp pulse width modulation (PWM) converter considering DC-link capacitor voltage balancing problem. The proposed control circuit uses multiband hysteresis comparators (MHCs) to simplify the control of the main circuit. The DC-link capacitor voltage balancing problem is solved by changing the shape of the MHC. The proposed method can (1) overcome voltage imbalance at the DC-link capacitors; (2) achieve a unity power factor; (3) generate nearly sinusoidal input currents; and (4) regenerate electric power back to the power system. Simulation and experimental results demonstrate the validity of the proposed method     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

Lattice parameter determination of a strained area of an InAs layer on a GaAs substrate using CBED

All the six lattice parameters (a, b, c, alpha, beta and gamma) of a strained area of an InAs layer grown on a GaAs substrate were determined without any assumption of the crystal lattice symmetry from the higher-order Laue zone (HOLZ) lines appearing in one convergent-beam electron diffraction (CBED) pattern. The analysis was performed with three steps. Firstly, the parameters alpha and beta were determined from the deviations of the HOLZ lines from the mirror symmetry perpendicular to the [001] direction. Secondly, the parameter c was determined from the distance between the intersections of the HOLZ lines, which have the same h and k indices but different l indices. Finally, the parameters a, b and gamma were determined simultaneously from several distances between the intersections of the HOLZ lines. The lattice parameters determined for the strained area were a = 0.611(2) nm, b = 0.615(1) nm, c = 0.6119(7) nm, alpha = 89.5(1) degrees, beta = 89.0(2) degrees and gamma = 89.1(2) degrees. This result implies that the cubic lattice of InAs is elongated approximately in the [111] direction and the exact lattice symmetry is triclinic. The same analysis procedure was applied to another two specimen areas. It was found that the areas have orthorhombic distortions with lattice parameters a = 0.607(2) nm, b = 0.604(1) nm and c = 0.6085(7) nm for one area, and with a = 0.607(2) nm, b = 0.605(1) nm and c = 0.6065(7) nm for the other area. It is should be emphasized that the present analysis of lattice distortions is immediately applicable to the other semiconductors, such as Si, SiGe or GaAs layers, without assuming any crystal system.     

Phase equilibria of Sn-In based micro-soldering alloys

The phase equilibria of Sn-In-X (X=Ag, Bi, Sb, Zn), the most basic information necessary for the development of Pb-free micro-soldering alloys, were studied using the CALPHAD method. Thermodynamic analyses for describing the Gibbs energies of the constituent phases were made by optimizing the obtained data on the experimental phase diagrams, and such data in the literature, including data on thermochemical properties. The present results combined with the thermodynamic database which was recently developed by our group [I. Ohnuma et al., J. Electron. Mater. 28, 1164 (1999)] provide various information on phase equilibria such as liquidus and solidus surfaces, isothermal and vertical section diagrams, mole fractions of the phase constitutions, etc., and thermodynamic properties such as activity, heat of mixing, surface energy, viscosity, etc., in multi-component soldering alloy systems including the elements of Pb, Bi, Sn, Sb, Cu, Ag, Zn, and In. Typical examples for the phase diagrams and thermodynamic properties of Sn-In-X ternary systems are shown. The application of the database to the alloy design for Pb-free solders is also presented.     

An approach for organizing knowledge according to terminology and representing it visually

We describe a term relation frequency (TRF) method for finding comprehensive documents in a rapidly growing academic discipline. The method enables us to organize knowledge into a single document based on terminology. The method is based on the classification of documents into comprehensive, central, peripheral, and independent classes according to the commonality and exclusiveness of terminology. Being able to find the documents quickly is helpful for our understanding of the discipline. Multiple-meaning technical terms such as "coordination" play a key role in rapidly growing academic disciplines such as coordination science. Visual representation of the multiple-meaning terms helps us to identify quickly and easily how the terms are used. With TRF and visualization methods, we can identify documents that explain a technical term comprehensively. We can also identify a change in the subject of a discipline according to when the comprehensive documents are written. We show that the observed change matches our understanding of the topic of the field "coordination science." The methods discussed here are promising to help us quickly understand and advance research in rapidly growing academic disciplines such as coordination science.