Mechanical properties and morphological changes of poly(lactic acid)/polycarbonate/poly(butylene adipate‐co‐terephthalate) blend through reactive processing

The mechanical properties and morphological changes of poly(lactic acid) (PLA), polycarbonate (PC), and poly(butylene adipate‐co‐terephthalate) (PBAT) polymer blends were investigated. Several types of blend samples were prepared by reactive processing (RP) with a twin‐screw extruder using dicumyl peroxide (DCP) as a radical initiator. Dynamic mechanical analyses (DMA) of binary polymer blends of PC/PBAT indicated that each component was miscible over a wide range of PC/PBAT mixing ratios. DMA of PLA/PBAT/PC ternary blends revealed that PBAT is miscible with PC even in the case of ternary blend system and the miscibility of PLA and PBAT can also be modified through RP. As a result, the tensile strain and impact strength of the ternary blends was increased considerably through RP, especially for PLA/PBAT/PC = 42/18/40 (wt/wt/wt) with DCP (0.3 phr). Scanning electron microscopy (SEM) analysis of the PLA/PBAT/PC blends revealed many small spherical island phases with a domain size of approximately 0.05–1 μm for RP, whereas it was approximately 10 μm without RP. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Percolated Network Structure Formation and Rheological Properties in Nylon 6/Clay Nanocomposites

To understand the effect of the percolated clay network structure formed by the exfoliated clay layers in nanocomposites, the clay network structure in nylon‐6‐based nanocomposites is characterized using TEM and FFT analyses. A MMT volume fraction between 0.013 and 0.014 is the percolation threshold for strong network formation. The volume spanning MMT network leads to a very high flow activation energy as compared with that of neat nylon 6, resulting in the pseudo‐solid like response under molten state in N6CNs. A canonical NVT‐MD simulation was conducted in the system made up by nylon 6 molecules/Si(OH)₄ molecules. The formation of the strong interfacial interaction between nylon 6 molecules and Si(OH)₄ molecules induced by OH groups is suggested.

     

Thermal conductivity of neptunium dioxide

The thermal diffusivity of neptunium dioxide was measured in the temperature range from 473 to 1473 K by using a laser flash method. The thermal diffusivity slightly decreased with increasing temperature in the temperature range investigated. The heat capacity of NpO₂ was measured in the temperature range from 334 to 1071 K by using a drop calorimetry method. The heat capacity of NpO₂ determined in this study was slightly larger than that of UO₂ and about 7% smaller than that of PuO₂. The thermal conductivity of NpO₂ was determined from the thermal diffusivity, the heat capacity and the bulk density. It was found that the thermal conductivity of NpO₂ from 873 to 1473 K lay between those of UO₂ and PuO₂.     

High temperature coefficients of resistance of VO2 films grown by excimer-laser-assisted metal organic deposition process for bolometer application

With bolometer application in mind, we prepared VO₂ films on TiO₂ (001) substrates by an excimer-laser-assisted metal organic deposition process at 300 °C or less. A metal-to-insulator transition of VO₂ is expected to induce high temperature coefficient of electrical resistance (TCR) useful for high-performance infrared sensors, but the practical use of crystalline VO₂ films has been prevented due to the accompanied wide hysteresis. In this study, by forming the epitaxial phase only near the substrate interface, the transition of the film was successfully broadened and the hysteresis disappeared. The maximum TCR of the film was more than -10%/°C near room temperature, and the temperature range in which TCR was higher than -4%/°C was very wide (280-320 K).     

Lead solubility in FeO x -CaO-SiO2 slags at iron saturation

Experiments have been carried out to determine the equilibria between FeO _x -CaO-SiO₂ slag and lead metal in iron crucibles at temperatures ranging from 1473 to 1573 K. It has been found that the highest lead solubilities are observed in the silica-saturated iron silicate slags, while the lowest solubilities are observed in the CaO-saturated calcium ferrite slags. The activity coefficient of PbO varies from 0.15 to 3, depending on the slag composition. Changes in temperature do not have a significant impact on the activity coefficient. The activity of FeO and pct Fe³⁺/pct Fe²⁺ ratios have been determined as a function of slag composition. These new experimental data have been incorporated into an optimized thermodynamic slag model using the computer package FACT.     

CO2 Sensing Property of CuO-BaTiO3 Mixed Oxide Film Prepared by Self-Assembled Multibilayer Film as a Precursor

Preparation of CuO-BaTiO₃ mixed oxide thin film by the decomposition of a self-assembled multibilayer film as a molecular template was investigated in this study. Furthermore, CO₂ sensing property of the resultant thin film was investigated as a capacitive type sensor. The self-assembled bilayer film of few 1000 layers thickness can be obtained easily by casting an aqueous suspension consisting of dimethyldihexadecylammoiun bromide (DC1-16), Cu(ClO₄)₂, Ba(TiO(C₂H₄)₂), 2,6-dimetyle-3,5heptadione (DHP), and polyvinyl alcohol. Divalent copper ion (Cu²⁺)) which is associated with 2 DHP molecules was incorporated into the molecular bilayer film and BaTiO₃ precursor exists at the interspace of molecular bilayer film by coordinating with polyvinyl alcohol. Upquenching the organic-inorganic film at 1173 K leads to the uniform film of CuO-BaTiO₃ oxide mixture. Although operating temperature shifted to higher temperature, the resultant film exhibits the capacitance change upon exposure to CO₂. Consequently, it is concluded that the mixed oxide film of CuO-BaTiO₃ prepared by the decomposition of multibilayer film was also an appropriate capacitive type CO₂ sensor.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

The characteristics of the external‐electrode mercury fluorescent lamp for backlighting liquid‐crystal‐television displays

Abstract— A reliable external‐electrode mercury fluorescent lamp (EEFL) has been developed for backlighting a liquid‐crystal‐television (LC‐TV) display. This involved the investigation of the EEFL characteristics and the improvement in the construction of the EEFL and drive waveforms, in the frequency range of 50–200 kHz, that affects the EEFL characteristics. The results showed that a sinusoidal waveform is suitable for driving the EEFL, and EEFL's voltage decreases when the frequency of the drive waveform is increased.