Anaerobic degradation of palm oil mill effluent (POME)

The biodegradation characteristics of palm oil mill effluent (POME) and the related microbial community were studied in both actual sequential anaerobic ponds in Malaysia and enrichment cultures. The significant degradation of the POME was observed in the second pond, in which the temperature was 35-37 °C. In this pond, biodegradation of major long chain fatty acids (LCFA), such as palmitic acid (C16:0) and oleic acid (C18:1), was also confirmed. The enrichment culture experiment was conducted with different feeding substrates, i.e. POME, C16:0 and C18:1, at 35 °C. Good recovery of methane indicated biodegradation of feeds in the POME and C16:0 enrichments. The methane production rate of the C18:1 enrichment was slower than other substrates and inhibition of methanogenesis was frequently observed. Denaturing gradient gel electrophoresis (DGGE) analyses indicated the existence of LCFA-degrading bacteria, such as the genus Syntrophus and Syntorophomonas, in all enrichment cultures operated at 35 °C. Anaerobic degradation of the POME under mesophilic conditions was stably processed as compared with thermophilic conditions.     

Adsorption of four perfluorinated acids on non ion exchange polymer sorbents

Perfluorinated compounds (PFCs) have attracted global concern due to their ubiquitous distribution and properties of persistence, bio accumulation and toxicity. The process of adsorption has been identified as an effective technique to remove PFCs in water. Different non ion-exchange polymeric adsorbents were tested with regard to their sorption kinetics and isotherms at low PFCs concentrations. Selected PFCs were perfluorobutanoic acid (PFBA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA) and perfluorodecanoic acid (PFDA) and the tested polymers were three types of Dowex optopores (V-493, V503, and L493), Amberlite XAD-4, and Filtrasorb 400 (Granular Activated Carbon-GAC). We observed the selective adsorption of PFCs on synthetic polymers. For PFDA, Amberlite XAD-4 gave the Freundlich adsorption constant of 2,965 (microg PFCs/g sorbent)(microg PFCs/L)(-n), which was higher than that of GAC (121.89 (microg PFCs/g sorbent) (microg PFCS/L)(-n)). In the case of PFBA, GAC showed better performance (13.36) (microg PFCs/g sorbent) microg PFCS/L)(-n) than synthetic polymers (0.62-5.23) (microg PFCs/g sorbent) (microg PFCS/L)(-n). Adsorption kinetics of all adsorbents were well described (R2 = 0.85-1) by pseudo-second order kinetic model. Sorption capacity was influenced by initial PFCs concentration for all adsorbents. GAC reached the equilibrium concentration within 4 hours, Amberlite XAD 4 reached it within 10 hours and other polymers took more than 70 hours.     

Development of a mathematical model for predicting water vapor mass generated in micro-explosion

This paper describes a mathematical model for predicting the mass of water vapor generated in micro-explosion. First, a single droplet experiment was carried out. A W/O (water/oil) emulsified fuel droplet suspended by a thermocouple was heated by a halogen spot heater, and micro-explosion was observed using a high-speed video camera. The progress of the coalescence of the dispersed water droplet was observed while droplet was heated, and an aggregated water droplet was formed in the oil layer. Based on the measured micro-explosion characteristics, a mathematical model for predicting water vapor mass generated in micro-explosion was proposed. The size of the aggregated water droplet just before micro-explosion was measured to verify the proposed mathematical model. Under certain assumptions, mass and energy conservation equations were applied to micro-explosion process, and an equation to calculate water vapor mass generated in micro-explosion was derived. The derived equation and some measurement results provide enough information to calculate water vapor mass generated in micro-explosion. The calculated diameter of the water droplet, which changed to vapor in micro-explosion, was compared to that of the aggregated water droplet just before micro-explosion. The calculated results roughly agreed with experimental ones, and the validity of the proposed model was verified.     

A numerical investigation of evaporation characteristics of a fuel droplet suspended from a thermocouple

Numerical simulations of combined natural convection–conduction in a droplet of n-dodecane suspended from a thermocouple were carried out, taking into consideration evaporation, and the effect of thermocouple diameter on the evaporation characteristics was investigated. The calculated temperature history of the droplet is in good agreement with experimental results; both show that the rate of heating decreases with increasing thermocouple diameter. The maximum error in temperature due to the thermocouple increases linearly with increasing thermocouple diameter. Thus, in investigations involving a droplet suspended from a thermocouple, it is preferable to use a thermocouple with the smallest possible diameter.     

Combining remote sensing with physical flow laws to estimate river channel geometry

A reliable representation of river terrains is essential to river research. Field surveys of river channel geometry are time‐consuming, costly, and logistically constrained and thus would encounter difficulties to achieve sufficient spatial coverage, resolution, and frequency of resurvey. This paper aims to demonstrate an efficient approach to building a river terrain model (RTM), the emphasis being on how to combine bathymetry and topography derived from satellite images captured at different flow stages. A method for calculating the difference between high and low stages (DHLS) based on the uniform‐flow theory is proposed. Calculations are carried out for a 13‐km long meandering section of the gravel‐bed Goulais River in Canada, which features pools and riffles, alternating point bars, and midchannel bars. A RTM for this complex section has been successfully produced. It consists of three data components: bathymetry at low stage, topography at high stage, and DHLS. The results capture realistic characteristics, including thalweg shift, steep outer banks, and gradual inner banks. They also show realistic longitudinal and lateral locations of pools and riffles. To illustrate potential applications of RTM, this paper has computed extreme bed shear stresses at bankfull discharge through hydrodynamics simulations of depth‐averaged flow in the river section and further estimated bed‐sediment grain‐size distributions. The estimates compare well with field measurements. The DHLS can vary significantly along a river channel. The proposed method for determining it is not site‐specific, and hence applicable to other rivers. The novelty of the methodology discussed lies in combining remote sensing techniques with physical flow laws.     

Effect of temperature on friction observed between a Si3N4 tip and a dodecanethiol self-assembled monolayer on Au(1 1 1)

Recent computational studies (Phys. Rev. Lett. 70 (1993) 1960; Phys. Rev. B 62 (2000) 17055) predicted that friction of ordered organic monolayer had characteristic dependence on temperature, where the maximum friction was observed around rotator transition point of the monolayer. This remained to be confirmed experimentally. Using a friction force microscope (FFM) combined with a temperature regulation module, we attempted to investigate such dependence on temperature (130 K-room temperature) on a self-assembled monolayer of dodecanethiol prepared on Au(1 1 1). The observed friction showed strong dependence on temperature and good agreement with the computational prediction.     

Effects of base layer thickness on reliability of CVD Si3N4 stack gate dielectrics

Effects of the base layer in Si₃N₄/SiON stack gate dielectrics, in particular, the physical thickness of the base layer, on the dielectric reliability, MOSFET performance and process controllability are investigated. It is found that the electrical characteristics such as TDDB lifetime as well as the Si₃N₄ film property in Si₃N₄/SiON stack dielectrics with the same capacitance oxide equivalent thickness strongly depend on the SiON-base layer thickness. From the TDDB measurements for both stress polarities and from the Si₃N₄ stoichiometry by the X-ray photoelectron spectroscopy analysis, the optimum SiON-base layer thickness is determined to be approximately 1 nm, in order to obtain longer TDDB lifetime and surperior n-ch MOSFET performance. The obtained results are considered to attribute to the nitrogen profile in the Si₃N₄/SiON stack dielectrics and the strained layer thickness near SiON/Si interface.     

Twin-electron biprism

In order to obtain a large deflection angle without increasing the applied voltage to an electron biprism, we have developed a 'twin-electron biprism' (TBP), which is composed of two filament electrodes and a pair of ground plates. The observed interference-fringe spacing revealed that the deflection angle created by a TBP was about twice larger than that by a 'conventional electron biprism'. Also, we have suggested, in a double-electron biprism interferometry, the optimal disposition of a TBP for reducing the intensity of Fresnel fringes recorded in an electron hologram.     

Transversal merge operation: a nondominated coterie construction method for distributed mutual exclusion

A coterie is a set of subsets (called quorums) of the processes in a distributed system such that any two quorums intersect with each other and is mainly used to solve the mutual exclusion problem in a quorum-based algorithm. The choice of a coterie sensitively affects the performance of the algorithm and it is known that nondominated (ND) coteries achieve good performance in terms of criteria such as availability and load. On the other hand, grid coteries have some other attractive features: 1) a quorum size is small, which implies a low message complexity, and 2) a quorum is constructible on the fly, which benefits a low space complexity. However, they are not ND coteries unfortunately. To construct ND coteries having the favorite features of grid coteries, we introduce the transversal merge operation that transforms a dominated coterie into an ND coterie and apply it to grid coteries. We call the constructed ND coteries ND grid coteries. These ND grid coteries have availability higher than the original ones, inheriting the above desirable features from them. To demonstrate this fact, we then investigate their quorum size, load, and availability, and propose a dynamic quorum construction algorithm for an ND grid coterie.     

Optimum design of a grazing-incidence flat-field spectrograph with a spherical varied-line-space grating

A grazing-incidence spectrograph is designed by use of the flat-field image-focusing property of a spherical varied-line-space grating. Optimum grating parameters for mechanical ruling are selected by application of genetic algorithms. Two gratings, one for 2-5-nm and the other for 5-20-nm spectral regions, are designed, and their fabrication tolerances are analyzed.