Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

Treatment of Chronic Kidney Disease with Extracellular Vesicles from Mesenchymal Stem Cells and CD133+ Expanded Cells: A Comparative Preclinical Analysis

Chronic kidney disease (CKD) is characterized by structural abnormalities and the progressive loss of kidney function. Extracellular vesicles (EVs) from human umbilical cord tissue (hUCT)-derived mesenchymal stem cells (MSCs) and expanded human umbilical cord blood (hUCB)-derived CD133⁺ cells (eCD133⁺) maintain the characteristics of the parent cells, providing a new form of cell-free treatment. We evaluated the effects of EVs from hUCT-derived MSCs and hUCB-derived CD133⁺ cells on rats with CDK induced by an adenine-enriched diet. EVs were isolated by ultracentrifugation and characterized by nanoparticle tracking analysis (NTA) and electron microscopy. The animals were randomized and divided into the MSC-EV group, eEPC-EV group and control group. Infusions occurred on the seventh and 14th days after CKD induction. Evaluations of kidney function were carried out by biochemical and histological analyses. Intense labeling of the α-SMA protein was observed when comparing the control with MSC-EVs. In both groups treated with EVs, a significant increase in serum albumin was observed, and the increase in cystatin C was inhibited. The results indicated improvements in renal function in CKD, demonstrating the therapeutic potential of EVs derived from MSCs and eCD133⁺ cells and suggesting the possibility that in the future, more than one type of EV will be used concurrently.     

Mechanical properties of drawn poly(methyl methacrylate) filled with ultrafine particles

The elastic and yield properties of drawn poly(methyl methacrylate) (PMMA) filled with ultrafine SiO₂ are described as functions of filler content and size. The drawn PMMA composites were made by uniaxially drawing to x4.0 at 100°C and at a rate of 20 mm/min. Four compliance values, i.e., S₃₃, S₁₁, S₁₃, and S₄₄ were determined. These values decreased with filler content and decreasing filler size. The relative compliance values S^de/S^do(S^de is the compliance of drawn PMMA composites and S^do is that of drawn unfilled PMMA) are almost equivalently changed with changes in filler content. The elastic properties of drawn PMMA composites are thus reinforced isotopically. This is characteristic of PMMA which has a large side group. The yield behavior of drawn PMMA composites have similar filler size and content dependence to those of elastic properties except that the transverse yield stresses become more brittle with filler content. The anisotropy in yield stress is relatively larger than that of elastic properties. This is probably because the anti-reiforcing effect, such as fibrillation becomes prominent with increasing filler content in the perpendicular direction.     

Synchronal measurement of flow structure and heat transfer of impingement jet

This paper will present the characteristics of flow behavior and thermal field of both free and
impingement jet issued from a circular orifice nozzle at Re=8900.The flow behavior of a single round
jet and impingement jet was observed by smoke flow visualization recorded by a high speed camera
using 5000 frame per second.Heat transfer coefficient on the impingement surface was measured by
means of infrared camera （TVS-8500,Avio） with a two-dimensional array of Indeum-Antimony （In Sb）
sensors varying in the separation distance between the nozzle and the target plate.The heat transfer
coefficient changes in time and spatial.Therefore,the root mean square distribution of the heat
transfer was obtained from the data.As a result,it was confirmed that the longitudinal vortex was
observed outside of the ring vortex,and then the longitudinal vortex was penetrated in the jet
flow.Moreover,the high value of root mean square of the heat transfer coefficient has spread radially
in stripy manner,which is caused as the results of the longitudinal vortexes flowing in the radial
direction on the impingement plate.     

Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

A THERMOELASTOPLASTIC SOLUTION FOR A CIRCULAR SOLID CYLINDER SUBJECTED TO HEATING AND COOLING

Abstract

This paper presents a theoretical study of the stresses in an infinite circular solid cylinder subjected to rapid surface heating and cooling. A quasistatic, uncoupled, thermoelastoplastic analysis based on the incremental theory of plasticity is formulated, and a numerical procedure is developed for a method of successive elastic solutions. The material of the cylinder is assumed to have temperature-dependent properties and to be characterized by the Romberg-Osgood stress-strain relation. The transient and residual stress distributions are discussed in detail, along with variations of the equivalent stress and plastic strain with time.