Effect of stitch density and stitch thread thickness on compression after impact strength and response of stitched composites

In this paper, the damage failure and behaviour of stitched composites under compression after impact (CAI) loading are experimentally investigated. This study focuses on the effect of stitch density and stitch thread thickness on the CAI strength and response of laminated composites reinforced by through-thickness stitching. Experimental findings show that stitched composites have higher CAI failure load and displacement, which corresponds to higher energy absorption during CAI damage, mainly attributed to greater energy consumption by stitch fibre rupture. The coupling relationships between CAI strength, impact energy, stitch density and stitch thread thickness are also revealed. It is understood that the effectiveness of stitching has high dependency on the applied impact energy. At low impact energy range, CAI strength is found to be solely dependent on stitch density, showing no influence of stitch thread thickness. It is however observed that stitch fibre bridging is rendered ineffective in moderately stitched laminates during compressive failure, as local buckling occurs between stitch threads, resulting in unstitched and moderately stitched laminates have similar CAI strength. The CAI strength of densely stitched laminates is much higher due to effective stitch fibre bridging and numerous stitch thread breakages. At high impact energy level, CAI strength is discovered to be intimately related to both stitch density and stitch thread thickness. Since CAI failure initiates from impact-induced delamination area, stitch fibre bridging is considerable for all specimens due to the relatively large delamination area present. Stitch threads effectively bridge the delaminated area, inhibit local buckling and suppress delamination propagation, thus leading to increased CAI strength for laminates stitched with higher stitch density and larger stitch thread thickness. Fracture mechanisms and crack bridging phenomenon, elucidated by X-ray radiography are also presented and discussed. This study reveals novel understanding on the effectiveness of stitch parameters for improving impact tolerance of stitched composites.     

Energy Loss of Fourth Sound in Superfluid 3He within Small Pores

We performed a high-sensitivity fourth sound resonance experiment for pure superfluid ³He at 29.0 bar in sintered silver powder cell to clarify the hydrodynamic property of ³He in the aerogel-sintered silver system. We discuss the energy loss of fourth sound. An anomaly in the energy loss at the AB phase transition as found in the aerogel system was not observed. Our analysis shows that the energy loss Q ⁻¹, which monotonically decreases with decreasing temperature, can be understood by the hydrodynamic theory in the B phase qualitatively and quantitatively. We estimated the effective pore radius R in the powder cell.      

High-efficiency wavelength conversion using FWM in an SOAintegrated DFB laser

A wavelength converter that uses four-wave mixing (FWM) in an SOA-integrated distributed-feedback (DFB) laser was demonstrated. Lossless conversion up to 300-GHz detuning and a conversion efficiency of -5 dB at 1-THz detuning was achieved. The device exhibited low ASE (noise) level, and noise figure (NF) characteristics of 24 dB for 16-nm wavelength conversion was observed. This high-efficiency FWM wavelength conversion provided by a single device is promising for optical wavelength shifters in large-scale optical communication systems     

Corrosion prevention of iron with novel organic inhibitor of hydroxamic acid and UV irradiation

Corrosion prevention by self-assembled monolayers (SAM) of monomer and polymer inhibitor on iron covered with air-formed oxide films was investigated by cyclic voltammetry in borate buffer solution. Anti-corrosion efficiency of the SAM-coated Fe electrodes depends on UV irradiation duration on Fe electrodes prior to coating and inhibitor concentration to form SAM. The 1-h UV-irradiated Fe electrodes coated with SAM exhibits the most effective corrosion resistance despite the anti-corrosion efficiency of air-formed films on Fe was linearly increased with UV irradiation. The addition of monomer in polymer solution improves the stability and corrosion resistance of SAM.     

Ionic liquid electrolytes compatible with graphitized carbon negative without additive and their effects on interfacial properties

Introduction of bis(fluorosulfonyl)imide (FSI) as an anion to an ambient-temperature ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium (EMI) as well as lithium (Li) cations can provide a reversible Li intercalation into a graphitized electrode, while such intercalation is completely irreversible without FSI. The surface-layer components on the graphitized electrodes, cycled in the ionic liquid electrolytes with and without FSI, were found to be chemically similar based on X-ray photoelectron spectroscopy. Ac impedance spectroscopy revealed that the resistance of the electrode charged with FSI was much lower even than that charged in a solvent electrolyte system containing ethylene carbonate (EC) and dimethyl carbonate (DMC). On the basis of these physicochemical analyses, the origins of cycleability in the presence of FSI are discussed.     

Improved detection of HIV-2 proviral DNA in dually seroreactive individuals by PCR

OBJECTIVE: To improve the detection rate of HIV-2 proviral DNA in primary uncultured peripheral blood mononuclear cells (PBMC) of HIV-2-seroreactive and HIV-1-HIV-2 dually seroreactive individuals. MATERIALS AND METHODS: Two newly designed HIV-2 PCR primer pairs in the long terminal repeat (LTR) gag and gag-pol regions and a previously described env and LTR HIV-2 PCR primer pairs were tested on samples from 66 confirmed HIV-2-seropositive individuals (The Gambia, 40; C?te d'Ivoire, 17; Guinea-Bissau, nine), 209 dually seroreactive individuals (The Gambia, 82; C?te d'Ivoire, 127), 24 genetically characterized isolated HIV-1 strains (group M subtypes A-H and group O), one simian immunodeficiency virus (SIV) strain cpz, 10 HIV-2 isolates (subtype A, B and unidentified), two SIVsm isolates, and 10 seronegative samples. RESULTS: All HIV-2 primers evaluated showed 100% specificity since there was no amplification observed with 24 HIV-1, one SIVcpz and 10 seronegative samples. One single copy of the HIV-2 genome could be detected with all outer primer pairs as well as all inner primer pairs on one PCR round used. Sensitivity of primers (at least one of the four primer pairs was positive) to HIV-2-seropositive samples was 100% (all nine) in Guinea-Bissau, 71% (12/17) in C?te d'Ivoire, 100% (all 20) in Gambian AIDS patients, and 85% (17/20) in Gambian pregnant women. Doubling the PBMC of dually seroreactive individuals from 7.5 x 10(4) to 1.5 x 10(5) in the PCR revealed the presence of both HIV-1 and 2 proviral DNA in 72% (92/127) in C?te d'Ivoire and 72% (59/82) in The Gambia. By doubling the number of PBMC, HIV-2 detection in dually seroreactive individuals by PCR was increased from 65 to 77% in C?te d'Ivoire and from 67 to 83% in The Gambia. CONCLUSIONS: The use of 1.5 x 10(5) primary uncultured PBMC and the newly designed HIV-2 primer pairs allowed us to document the highest percentage (72%) ever reported of HIV-1-HIV-2 dual infections amongst HIV-1-HIV-2 dually seroreactive individuals in C?te d'Ivoire and The Gambia. Improved detection of HIV-2 proviral DNA, rather than exposure to both viruses, infection with only one virus, or infection with a unique third virus containing epitopes common to both HIV-1 and HIV-2, contributes to a more accurate monitoring of the prevalence of HIV-1-HIV-2 dual infections.     

CA 19-9 in evaluating the response to chemotherapy in advanced pancreatic cancer

BACKGROUND/AIMS: The determination of serum carbohydrate antigen 19-9 (CA 19-9) level is useful in managing pancreatic cancer. However, the usefulness of this marker in evaluating the response to chemotherapy has not been fully established. MATERIALS AND METHODS: Serial changes of serum CA 19-9 levels were studied during chemotherapy in 66 pancreatic cancer patients who showed CA 19-9 level of 100 U/ml or greater before treatment. We investigated the relationship between patient survival and reduction in serum CA 19-9 level after treatment. RESULTS: When a responder was defined as a patient whose serum CA 19-9 level was reduced by more than 50% of the pre-treatment level within 2 months after treatment, CA 19-9 response was observed in 9 (13%) of the 66 patients. Median survival times of CA 19-9 responders and non-responders were 141 and 88 days, respectively. Based on Cox regression analysis, the relative risk of cancer death in CA 19-9 responders for non-responders was 0.47 (95% confidence interval, 0.21 to 1.05). CONCLUSIONS: CA 19-9 reduction may be useful for assessing the efficacy of chemotherapy for advanced pancreatic cancer.     

Discovering Error Classes from Discrepancies in Novice Behaviors Via Multistrategy Conceptual Clustering

The automatic discovery of classes of errors that represent misconceptions and other knowledge errors underlying discrepancies in novice behavior is not a trivial task. A novel approach to this problem is described, in which relationships among behavioral discrepancies are analyzed and inductively generalized via an unsupervised, incremental, relational multistrategy conceptual clustering method that takes into account similarities as well as causalities in the data. Performance results on the classification of discrepancy sets and discovery of error classes from discrepancies of buggy PROLOG programs demonstrate the potential of the approach.