First nuclear transmutation of 237Np and 241Am by accelerator-driven system at Kyoto University Critical Assembly

This study demonstrates, for the first time, the principle of nuclear transmutation of minor actinide (MA) by the accelerator-driven system (ADS) through the injection of high-energy neutrons into the subcritical core at the Kyoto University Critical Assembly. The main objective of the experiments is to confirm fission reactions of neptunium-237 (²³⁷Np) and americium-241 (²⁴¹Am), and capture reactions of ²³⁷Np. Subcritical irradiation of ²³⁷Np and ²⁴¹Am foils is conducted in a hard spectrum core with the use of the back-to-back fission chamber that obtains simultaneously two signals from specially installed test (²³⁷Np or ²⁴¹Am) and reference (uranium-235) foils. The first nuclear transmutation of ²³⁷Np and ²⁴¹Am by ADS soundly implemented by combining the subcritical core and the 100 MeV proton accelerator, and the use of a lead-bismuth target, is conclusively demonstrated through the experimental results of fission and capture reaction events.     

The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions

The ion-selective property of hydrous ferric oxide precipitate films has been investigated by measuring membrane potentials which arise across precipitate membranes of hydrous ferric oxide with and without adsorbed MoO₄^2? ions and of ferric molybdate in solutions of NaCl, KCl, MgCl₂, CaCl₂, BaCl₂, AlCl₃, and FeCl₃. The hydrous ferric oxide membrane was only permeable to Cl^? ions in chloride solutions, whereas the membrane with adsorbed MoO₄^2? ions was permeable to cations in NaCl and KCl solutions, and to both Cl^? and cations in the presence of multivalent cations. The ferric molybdate membrane was permeable to Cl^? and cations in NaCl and KCl solutions, and only to Cl^? ions in the presence of multivalent cations. It is suggested that in chloride solutions, the corrosion of iron covered with a precipitate film of hydrous ferric oxide is accelerated by enrichment of Cl^? ions under the film, which may decrease the local pH and introduce a positive diffusion potential in the film. The adsorption of MoO₄^2? ions on the oxide changes the ion-selectivity of the precipitate film from the anion-selective to the cation-selective in solutions of NaCl and KCl. This cation-selectivity of the film may inhibit the corrosion of iron, because of H⁺ ions diffusing out of the film. The inhibitive effect of MoO₄^2? ions would be reduced in the presence of multivalent cations.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Effect of substituting elements on hydrogen uptake for Pd–Rh–H and Pd–Ag–H systems evaluated by magnetic susceptibility measurement

The magnetic susceptibility and the pressure-composition isotherm were measured simultaneously for Pd–Rh–H and Pd–Ag–H systems in order to clarify the effect of Rh or Ag substitution on the hydrogen uptake from viewpoint of the electronic band structure. The magnetic susceptibility of all Pd binary alloys prepared decreased monotonically with increasing hydrogen content. At high hydrogen contents, the magnetic susceptibility became approximately zero for Pd–Rh–H and Pd–Ag–H system, and the hydrogen content at which the magnetic susceptibility gives zero corresponded with the terminal of the plateau region in the isotherm curve. The results indicated that the magnetic susceptibility of hydride phase was almost zero for all Pd binary alloys. On the basis of the band structure of Pd metal, we concluded that atom substitution only affected shift of the energy at Fermi level, and the amount of the hydrogen uptake was dominated by the number of unoccupied d-band in the alloys.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.     

Electro-mechanical coupling in ionic gels

An ionic-polymer–metal-composite film shows electro-mechanical coupling. When the film is bent, electric current is induced. Measurement of the induced current indicates that the current depends on the speed of bending, but the total amount of the charge transferred across the film is independent of the speed, and depends only on the magnitude of the bending. The result indicates that in addition to previously proposed dynamical coupling effect, there is a static electro-mechanical coupling effect. Mathematical model is proposed to describe this phenomena.     

Comparison of soyasaponin and isoflavone contents between genetically modified (GM) and non-GM soybeans

Soyasaponins and isoflavones are main secondary metabolites in soybeans. In this report we compared the content of secondary metabolites between genetically modified (GM) and non-GM soybeans. Six cultivars/lines of GM and six cultivars/lines of non-GM soybeans were extracted with methanol. Each extract was partitioned with aqueous methanol and hexane and the aqueous methanol fraction was partially purified by HP-20 and LH-20 column chromatography to afford crude soyasaponin and isoflavone fractions. The main A-type soyasaponin, acetylsoyasaponin A1 (AcA1), and the main B-type soyasaponins, soyasaponins I and II (I and II), in the crude fractions were identified by LC/MS analyses with authentic samples. The main isoflavones, daidzin, genistin, daidzein and genistein (DI, GI, DE and GE), in the crude fractions were identified by LC photo-diode array analyses with authentic samples. The contents of AcA1, I and II in the crude soyasaponin fractions and those of DI, GI, DE and GE in the crude isoflavone fractions were analyzed by reversed-phase HPLC. The average contents (mg/100 g) of AcA1, I, II and total of B-type soyasaponins in GM soybeans were 36.4 +/- 24.2, 51.2 +/- 11.8, 26.4 +/- 7.6 and 77.7 +/- 18.5, respectively, and those in non-GM ones were 22.3 +/- 14.7, 46.3 +/- 17.8, 19.8 +/- 9.1 and 65.9 +/- 26.9, respectively. The average contents (mg/100 g) of DI, GI, DE, GE and total isoflavones in GM soybeans were 93.1 +/- 15.5, 121.8 +/- 19.4, 0.073 +/- 0.178, 0.320 +/- 0.082 and 215.3 +/- 33.3, respectively, and those in non-GM ones were 78.8 +/- 34.6, 106.7 +/- 28.3, 2.206 +/- 4.468, 0.822 +/- 0.754 and 188.5 +/- 26.7, respectively. There were no statistically significant differences in soyasaponin and isoflavone contents between GM and non-GM soybeans. Therefore, it was estimated that the GM soybeans are equivalent to the non-GM ones in terms of the composition of the main secondary metabolites.     

Development of mushrooms for thrombosis prevention by protoplast fusion

With thrombosis a major cause of death in Japan and the Western world, thrombin-inhibitory agents that constrain the formation of fibrin are sought. We screened for basidiomycetes showing anti-thrombin activity and isolated Laetiporus sulphureus. However, it was difficult to cultivate and its form was not satisfactory. We therefore used protoplast fusion between L. sulphureus and the commonly cultivated basidiomycete Hypsizygus marmoreaus to obtain cultivable basidiomycetes that produced an anti-thrombin substance. For the protoplast fusion of L. sulphureus and H. marmoreaus, the protoplast concentration, alternating electric field intensity, dielectrophoresis duration, and field pulse intensity used were of 1 x 10(7) protoplasts/ml, 100 V/cm.1 MHz, 60 s, and 8 kV/cm, respectively. The number of regenerated colonies obtained was 4961, from which 43 strains were selected for electrophoretic analysis. Four of the fusants were found to have a band from each parent in isozyme patterns obtained using their crude extract. The fruiting bodies of the fusants were very similar to those of H. marmoreaus. Crude extract from each of the fusants and from L. sulphureus showed anti-coagulative activity in terms of the thrombin clotting time. We thus obtained improved basidiomycetes that produce an anti-thrombin substance, are easily cultivated, and whose form resembles H. marmoreaus, a commonly used culinary mushroom.     

Breaking Ability and Interrupting Phenomena of a Circuit Breaker Equipped with a Parallel Resistor or Capacitor

This paper discusses the breaking ability of an air blast circuit breaker (ABB) or SF6 gas circuit breaker (GCB), and the interrupting phenomena around current zero in the case where a resistor or capacitor is connected in parallel with its interrupter to improve the breaking ability. It has been clarified that the use of a parallel resistor for ABB, and that of a parallel capacitor for GCB are the most effective methods to improve the breaking abilities; the parallel resistor not only serves to reduce the rate of rise of the transient recovery voltage (rrrV), but also shifts the current from the interrupter to itself around the current zero, thus reducing the stress for interruption. The improvement of the breaking ability is achieved by reducing the initial average rrrV between zero and 1 microseconds (inherent value), when the parallel capacitor is used with the GCB.     

Improvements in finite-element simulation for stamping and application to the forming of laser-welded blanks

During stamping-die design, the formability in sheet-metal forming process has been evaluated by the geometrical functions in ‘Die-Face CAD’, which has been developed and improved by Toyota Motor Corporation. When evaluation by these functions is difficult, formability has been estimated by performing experiments using test dies in which the forming defects are similar to those in the actual process.

A numerical method has been developed in order to substitute numerical analysis for experiments using test dies for the accurate prediction of defects in sheet-metal forming. The elastic-plastic FEM with the commercial code ‘JNIKE3D’ has been improved in the areas of: (1) the material constitutive equation; (2) the consideration of the pressure distribution on the blank-holder; and (3) the evaluation of breakage initiation. Using the improved method, the square-cup drawing process and the hemming process have been analyzed. Numerical results for strain, breakage initiation, and hemming deflection were in good agreement with experimental results. The formability of laser-welded blanks and the most efficient process to form them were evaluated also using the improved method.