Grafting of poly(ethylene-block-ethylene oxide) onto a vapor grown carbon fiber surface by γ-ray radiation grafting

To modify the surface of vapor grown carbon fiber (VGCF), poly(ethylene-block-ethylene oxide) (PE-b-PEO, M_n=1400, PEO content=50 wt%) was successfully grafted onto the surface by using γ-ray irradiation of the PE-b-PEO-adsorbed VGCF in solvent-free system. It is found that the percentage of polymer grafting reached 15.0% when the PE-b-PEO-adsorbed VGCF was irradiated by γ-ray over 40 kGy dose at 110 °C, but at the lower irradiation temperature of 75 °C, the grafting reaction scarcely proceeded. This indicates that polymer radicals formed by γ-ray irradiation were successfully trapped by VGCF surface above melting point of PE-b-PEO. On the other hand, when the dispersion of VGCF in THF solution of PE-b-PEO was irradiated, the percentage of PE-b-PEO grafting was less than 4.0%. It was confirmed by a field-emission scanning electron microscope (FE-SEM) that the surface of the VGCF was uniformly covered by grafted PE-b-PEO. In addition, the surface free energy of ungrafted and PE-b-PEO-grafted VGCF was determined.     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

LiErO2 formation on Er2O3 in static and natural convection lithium

Er₂O₃ is candidate material for insulating coating to prevent the magnetohydrodynamic (MHD) pressure drop in the self-cooled liquid Li blanket system. Although Er₂O₃ is stable material, detailed chemical behavior in liquid Li is not clear. Corrosion behavior of bulk Er₂O₃ in Li is investigated in static and flowing condition in the present study. After these tests, good compatibility of Er₂O₃ was confirmed and slight formation of LiErO₂ was detected by XRD analysis. This chemical behavior did not change in a static and flowing tests, however some of the corrosion product of LiErO₂ was removed easily by the Li flow. Intensity of LiErO₂ peaks in XRD spectrum suggests that the temperature gradient may affect the reaction rate in the natural convection loop. Since corrosion rate of Er₂O₃ is very small, slight change in state will be important information to evaluate lifetime of coating.     

High‐current lightning discharges in winter

Lightning electric‐field waveforms related to power line faults in winter have been identified. Most of those waveforms appear to be associated with upward lightning discharges with absolute peak currents of over 100 kA. They are quite different from common return‐stroke waveforms, and the lightning discharges which produce these characteristic waveforms are called GC (Ground to Cloud) flashes. These high‐current lightning discharges are distributed around the coastline in different ways depending on their polarities. The spatial distributions of high‐current lightning discharges around Japan are also investigated. It is revealed that the region of Honshu Island along the coastline of the Sea of Japan belongs to the area in which the density of high‐current lightning flashes is the highest in Japan through the year. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 8–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20874     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

Electrical and dielectric behaviors and their origins in the three-dimensional polyvinyl alcohol/MWCNT composites with low percolation threshold

The electrical conductivity and dielectric behavior of a three-dimensional composite of polyvinyl alcohol (PVA) and multiwalled nanotubes (MWCNTs) were measured and an extremely low percolation threshold was observed. Two established theories were used to investigate the behaviors of the composites near the percolation threshold, and then the results indicated that the intercluster polarization effect is more reasonable to explain the electrical property of our system in the frequency range of measurement. The high value of the dielectric constant of the composites was attributed to interfacial polarization within the bulk sample and DC conductance based on charge injection at electrode-sample interface. Thus an equivalent circuit was established by separating the behavior of the bulk sample from that of the electrode-sample interface. The introduction of the concept of Constant Phase Element into the equivalent circuit model gave a fit in good agreement with the experimental data and implied the influence of a fractal interface on the real capacitance. The interfacial polarization and the relaxation processes were fully studied. As a result, the activation energy associated with those relaxation processes in the composites was thought to be the energy needed for the charges accumulating and bounded on the interfaces between MWCNT and PVA.     

Myelin phagocytosis by macrophages and nonmacrophages during Wallerian degeneration

The literature concerning Schwann cells (SCs) and macrophages in myelin phagocytosis during Wallerian degeneration is reviewed. SCs carry out the first step in the removal of myelin by segmenting myelin and then incorporating the degraded myelin. The recruited macrophages then join in the myelin-phagocytosis event, appearing to make full use of their original phagocyte abilities until the end of myelin clearance. The molecular mechanisms of the two cells underlying myelin phagocytosis are thought to be different; myelin phagocytosis by SCs being lectin-mediated, i.e., opsonin-independent, whereas that of macrophages is mainly opsonin-dependent. It is important to note that SCs and macrophages cooperatively accomplish myelin phagocytosis.     

Analysis of specific IgE antibodies to staphylococcal enterotoxins,total serum IgE and hemogramme in carriers of Staphylococcus aureus

In order to evaluate the relationship between nasal carriers of S. aureus and their history of allergic diseases, the total serum IgE titer, the hemogramme pattern, and the titers of specific IgE antibody to Staphylococcal enterotoxins A and B (SEA and SEB) and of specific IgG antibody to SEB were investigated in 98 trade school students. Fifteen (15.3%) of the 98 students were sensitized to SEA and/or SEB (40.0% to SEA and 93.3% to SEB). In this group, 11 subjects were S. aureus carriers (73.0%) and 12 had a history of allergic diseases (80.0%). Low levels of specific IgG antibody to SEB were identified from both S. aureus carriers and non-carriers. The S. aureus carriers had significantly higher levels of total IgE titer than the non-carriers and the individuals with a history of allergic diseases had significantly higher total IgE titer levels than those having no history of allergic diseases (p < 0.01). In the hemogramme patterns of S. aureus carriers, a significant positive correlation was observed between the total IgE antibodies and the eosinophil rate (p < 0.05), and a negative correlation (p < 0.001) was recognized between the neutrophil and the lymphocyte rates.     

Multilingual disaster information system: information delivery using graphic text for mobile phones

A multilingual disaster information system (MLDI) has been developed to overcome the language barrier during times of natural disaster. MLDI is a web-based system that includes templates in nine languages so that translated texts can be made available immediately. Mobile phone e-mail with graphic text is a useful tool for delivering multilingual disaster information. The visibility of graphic text on mobile phones was measured and found to be equivalent to the built-in font. However, visibility deteriorates as the character size becomes smaller, especially, on displays with poor resolution. This article also discusses the necessity of multilingual information and measures for a safe and barrier-free society.