A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects

A simple and fast dispersion method that incorporates heating is used to disperse long (more than 10 μm) single-walled carbon nanotubes (SWCNTs) with minimal defects. The method enables a dispersed solution of SWCNTs to be produced in less than 10 min in only three steps: (1) addition of the dispersant, (2) heating, and (3) grinding. The dispersion method does not require sonication, which shortens the SWCNTs and can generate surface defects. SWCNT films were prepared from the dispersed solution, and the films exhibited a resistance of 380 Ω/sq at a transparency of 64.8%. This dispersion method can be easily scaled up, making it useful for the preparation of dispersed SWCNTs for commercial and industrial applications.     

A Moment Method for Evaporation Using a Logarithmic Size Distribution with the Smallest Size

A moment method of the log-normal distribution with the smallest size is applied to evaporation by newly introducing correction factors obtained from the error function. In this article, the improved moment method is tested for the evaporation, and is compared with the exact solutions calculated by the CIP semi-Lagrangian (CIP-SL) method. In small particle regime, the size distributions and the time histories of the total number and volume per unit volume are reproduced by the moment method for the evaporation near the smallest size. In large particle regime, however, the differences between the moment and exact solutions are larger with time, after the exact distribution spreads to the smallest size. This new moment solver can reproduce the evaporation near the smallest size even when large time step size is given, and thus is expected to be used for the parameterization of the evaporation of small particles in aerosol-transport model.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.     

Absorption spectra and tautomerism of aminonaphthazarins

2-n-Butylaminonaphthazarin (2) absorbs at 499 and 532 nm in ethanol but at 539 and 577 nm in alkali solution, while 2, 6-bis(n-butylamino)naphthazarin (3) absorbs at 461, 500 and 540 nm in ethanol but at 511 and 545 nm in alkali solution, with only a small bathochromic shift of 5 nm. The absorption curve of 3 was changed by addition of alkali and the λD_max at around 461 nm completely disappeared. In the case of 2-bromo-3, 6-bis(n-butylamino)naphthazarin (4), tautomerism between the 1, 4-quinone and 1, 5-quinone forms was observed and the isosbestic point was observed at 480 nm. Dye 2 easily deprotonated to give the 1, 4-dianion, but dyes 3 and 4 existed as tautomeric mixtures in solution and shifted to 1, 5-quinone forms in alkali solution.     

Influence of heating and laser irradiation on the Raman D band in single-wall carbon nanotubes

Fine structure of the Raman D band in single-wall carbon nanotubes (SWNTs) was investigated by heating and laser irradiation. It is shown that the D band is composed of three components at ～ 1313, 1340, and 1355 cm^? 1, denoted by D₁, D₂, and D₃, respectively. The D₁ and D₂ intensities significantly increase with laser irradiation in air and vacuum, respectively. The D₃ intensity drastically increases with heating in air. From these results, it is suggested that the fine structure of the D band is attributed to different kinds of defects introduced in SWNTs.     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Mixing mechanism of three‐tip kneading block in twin screw extruders

In recent years, twin screw extruders have been applied to various kinds of polymer processing. It has been important to find their optimum geometrical configurations and operational processing conditions for the best performance of extrusions and products. Many engineers have been evolving numerical and the experimental methods to characterize the mixing performance for twin screw extruders. We have carried out three‐dimensional flow simulations of kneading blocks in intermeshing co‐rotating twin screw extruders by using the finite element method to quantify their ability in distributive and dispersive mixing. We discuss their performance in distributive mixing for three different type of kneading blocks in terms of the residence time distribution and the nearest distance between markers at various periods of time, by using the marker tracking method. Those numerical techniques and applications of mixing indices have enabled us to quantify and evaluate their abilities in distributive mixing of kneading blocks in twin screw extruders.     

Stochastic Asset Pricing with Seismic Hazard Risk

Since cash flow of asset in the long run is generally subject to economic fluctuation, and also to potential damage due to seismic hazard risk, asset pricing is more relevantly evaluated, provided that uncertainties of both cash flow and seismic risk are properly taken into account. This study will propose a discounted cash flow method to evaluate asset pricing, in which incomes gained from asset are modeled as a Markov process and seismic loss is modeled due to only one earthquake event during the service time. A numerical example is demonstrated for an 11 story steel reinforced commercial building considering the service time of 50 years. Various risk–asset price curves are numerically obtained in the form of probability of excess versus asset price with discount rate as a parameter for cases with and without earthquake loss taken into account, and for a case in which earthquake strengthening measure is implemented. These curves contribute information to decision makers in charge of risk and investment management.     

Behavior of a two-stage absorption heat transformer combining latent and sensible heat exchange modes

A two-stage absorption heat transformer (TAHT) and its improved version, the cycle incorpaorating latent heat and sensible heat modes, are investigated by emplying energy-utilization diagrams (EUDs). Utilizing the exhaust gas of a gas turbine as the heat source and employing the water/lithium bromide as the working fluid, it has been concluded that this is an effective way of decreasing the exergy loss by combining latent and sensible heat exchange modes. Furthermore, the temperature of the useful heat is increased. This analysis can provide a basis for synthesis and development of absorption heat transformer systems.