Business process integration as a solution to the implementation of supply chain management systems

In the domain of supply chain management (SCM), various software packages have been developed for planning business strategies. To solve the problem of system productivity in applying planning packages, we propose a solution concept, business process integration (BPI), which fuses workflow and enterprise application integration (EAI) technology. Two characteristic policies are included in BPI. The first is to design the minimum set of business processes for real-time information sharing with planning packages without changing other processes. The second is to integrate several systems with EAI technology and to manage their execution with a workflow tool. Based on these policies, we propose various design templates and integration adapters. Our evaluation shows that using BPI, a target system can be developed with less manpower, in less time, and with higher quality than previous methods.     

Fabrication of Bulk β-FeSi2 Crystal With ThreeDimensional Alignment by an Oscillating Magnetic Field

It has been reported that an anisotropic magnetic field could produce the three-dimensional alignment of fine single-crystal particles with the orthorhombic crystal structure.However,the three-dimensional alignment was achieved only in suspensions.Fabrication of bulksinglematerials that have the three-dimensional alignment of grains has been desired.This study proposes a procedure for the fabrication,which consists of slip casting under an oscillating magnetic field and sintering.Optimization of casting and sintering conditions achieved the three-dimensionally aligned bulkβ-FeSi₂.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

Effect of drawing condition on mechanical properties and molecular orientation of self-reinforced poly(lactic acid) screws

Effects of extrusion ratio (ER) during extruding on mechanical properties of poly(lactic acid) (PLA) screws were investigated in terms of shear and twist strength. Shear strength increased by drawing, while twist strength decreased. This might be due to orientation of molecular chains during drawing. In order to evaluate orientation of molecular chains, orientation function in extruded billets was measured as a function of ER. Since orientation function increased with ER, drawing is effective method to improve shear strength of screw, where fibrous structure which was formed during extruding resisted shear stress in cross-section perpendicular to screw axis. Although orientation functions for billet extruded at ER 1.3–4 were equivalent, both strengths changed for the screw extruded at the range of this ER. Infrared spectra suggested transforming from α to β crystal for the billet extruded at the range of this ER. This result suggested that mechanical properties of screw also depended on the crystal forms.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Mumefural and related HMF derivatives from Japanese apricot fruit juice concentrate show multiple inhibitory effects on pandemic influenza A (H1N1) virus

Fruit-juice concentrate of Japanese apricot (Prunus mume Sieb. et Zucc.) has been shown to be effective against influenza A infection in MDCK cells. In this study, we isolated five components from the fruit-juice concentrate of Japanese apricot, 5-(hydroxymethyl)-2-formylfuran (HMF), 1-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (mumefural, MF), 2-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (MF‘), 1-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA1) and 2-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA2), and investigated their inhibitory activities against the novel influenza A/Narita/1/2009 (H1N1) pandemic virus hemagglutinin and neuraminidase functions, which are essential for viral attachment and budding, respectively. An hemagglutination inhibition assay indicated that MF and MF‘ were effective at minimum hemagglutination concentrations of 3.1 and 6.3 mM, respectively. An inhibition study for sialidase activity of the neuraminidase spike showed that MF was the most active anti-sialidase compound with an IC₅₀ value of 0.21 ± 0.01 mM, followed by MA2 (IC₅₀, 0.71 ± 0.09 mM), MA1 (IC₅₀, 1.64 ± 0.31 mM) and MF‘(IC₅₀, 1.62 ± 0.22 mM). Furthermore, MF was shown to inhibit the growth of the pandemic virus in a dose-dependent manner (62 ± 3% inhibition at 5 mM). The results suggest that MF, a citric acid ester linked to HMF at the 1-position of the propane backbone, might be a lead compound for the development of anti-influenza A inhibitors.     

Decomposition characteristics of biodegradable plastics made from sago starch‐extraction residue

Biodegradable plastics were synthesized for the effective use of sago starch‐extraction residue, which has been discarded as a waste. Two types of esterified sago starch‐extraction residue, P‐SP and L‐SP, were obtained. It had black color for P‐SP₁₆₀ (esterified by palm oil) to light yellow color for L‐SP₈₀ (esterified by lauric acid) and showed high carbon content, ranging from 399.3 to 537.1 g kg⁻¹. Biodegradable plastics from the residue, which had high esterification degree showed thermoplasticity and slower decomposition in Andisols in Japan and Inceptisols in Philippines. The esterification degrees of P‐SP₁₆₀ and L‐SP were 3.23 and 2.95 to 5.18 mmol g⁻¹, respectively. In addition, L‐SP₈₀ exhibited the most appropriate thermal softening behavior by heating. The cumulative decomposition of P‐SP₁₆₀ in Andisols and Inceptisols showed 16.7 and 32.8% of total carbon during 31 day of the incubation. On the other hand, the decomposition rates of L‐SP₈₀ in Andisols and Inceptisols were less than 10% of total carbon during 31 day of the incubation. The addition of triacetin as plasticizer to P‐SP₁₆₀ and L‐SP₈₀ remarkably influenced the decomposition rate of both molded P‐SP₁₆₀ and L‐SP₈₀. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Classification method of severe accident condition for the development of severe accident instrumentation and monitoring system in nuclear power plant

Instrumentation and monitoring systems in a nuclear power plant are very important to monitor plant conditions for safe operations and a plant shutdown. The severe accident at TOKYO ELECTRIC POWER COMPANY's Fukushima Daiichi Nuclear Power Station (hereinafter called as TF1) in March 2011 caused several severe situations such as core damage, hydrogen explosion, etc. Lessons learned from the severe accident at TF1 show that an appropriate operable instrumentation and monitoring system for a severe accident should be developed so that the system will deliver an appropriate performance for mitigation of severe accident condition in a nuclear power plant.

This paper proposes the classification method of severe accident condition for the development of an appropriate operable instrumentation and monitoring system for a severe accident based on the problem analysis of monitoring variables during the severe accident at TF1. The classification is formed on the basis of the integrity of boundary for plant safety and the successful (or unsuccessful) condition of the cooling water injection, and is used for an establishment of defining severe accident environmental conditions for the instrumentation and monitoring system. Examples of the establishment method are also shown in this paper.