Touch‐Interactive Flexible Sustainable Energy Harvester and Self‐Powered Smart Card

Sustainable and safe energy sources combined with cost effectiveness are major goals for society when considering the current scenario of mass production of portable and Internet of Things (IoT) devices along with the huge amount of inevitable e‐waste. The conceptual design of a self‐powered “eco‐energy” smart card based on paper promotes green and clean energy, which will bring the zero e‐waste challenge one step closer to fruition. A commercial raw filter paper is modified through a fast in situ functionalization method, resulting in a conductive cellulose fiber/polyaniline composite, which is then applied as an energy harvester based on a mechano‐responsive charge transfer mechanism through a metal/conducting polymer interface. Different electrodes are studied to optimize charge transfer based on contact energy level differences. The highest power density and current density obtained from such a paper‐based “eco‐energy” smart card device are 1.75 W m^?2 and 33.5 mA m^?2 respectively. This self‐powered smart energy card is also able to light up several commercial light‐emitting diodes, power on electronic devices, and charge capacitors.     

High-Density Frenkel Defects as Origin of N-Type Thermoelectric Performance and Low Thermal Conductivity in Mg3Sb2-Based Materials

Mg₃Sb₂-based intermetallic compounds with exceptionally high thermoelectric performance exhibit unconventional n-type dopability and anomalously low thermal conductivity, attracting much attention to the underlying mechanisms. To date, investigations have been limited to first-principle calculations and thermodynamic analysis of defect formation, and detailed experimental analysis on crystal structure and phonon modes has not been achieved. Here, a synchrotron X-ray diffraction study clarifies that, against a previous view of a simple crystal structure with a small unit cell, Mg₃Sb₂ is inherently a heavily disordered material with Frenkel defects, charge-neutral defect complexes of cation vacancies and interstitials. Ionic charge neutrality preserved in Mg₃Sb₂ is responsible for exotic n-type dopability, which is unachievable for other Zintl phase materials. The thermal conductivity of Mg₃Sb₂ exhibits deviation from the standard T⁻¹ temperature dependency with strongly limited phonon transport due to a strain field. Inelastic X-ray scattering measurement reveals enhanced phonon scattering induced by disorder. The results will draw renewed attention to crystal defects and disorder as means to explore new high-performance thermoelectric materials.     

Impact of Dynamic Interlayer Interactions on Thermal Conductivity of Ca3Co4O9

The phonon thermal conductivity of misfit-layered Ca₃Co₄O₉ has been calculated by perturbed molecular dynamics using a classical force field. Detailed numerical analyses reveal that, in spite of its smaller cross-sectional area, the CoO₂ layer transports more heat than the thicker rock salt (RS) layer, although its local thermal conduction is more suppressed than in another layered cobaltite, Na _x CoO₂. The origins of these differences have been elucidated through careful examination of the atomic arrangements in each layer. Since thermal conduction in the RS layer can be reduced without deteriorating electronic properties for which the CoO₂ layer is responsible, it is suggested that the RS layer should be modified to further suppress the overall in-plane thermal conductivity. Computational experiments with increasing number of Ca–O planes in the RS layer showed the opposite trend to what can be predicted based on the misfit between two dissimilar layers. Further analyses to reveal the origin of these unexpected results provide yet another strategy to further decrease the thermal conductivity, namely to control the dynamic interference between atoms across the interface between two layers.     

Growth and poliovirus production of Vero cells on a novel microcarrier with artificial cell adhesive protein under serum-free conditions

A microcarrier is used for the three-dimensional (3D) culture of adhesion-dependent mammalian cells. We developed a novel microcarrier by binding ProNectin F, an artificial cell adhesive protein synthesized by genetically engineered Escherichia coli to a polyacrylic superabsorbent polymer. The microcarrier is characterized by containing no animal-derived components. The serum-free culture of Vero cells for vaccine production using the microcarrier increased the number of Vero cells by approximately 30% compared with the existing dextran beads coated with porcine Type I collagen, which resulted in approximately a 30% to 40% increase in the infectivity titer of the Sabin 2 strain of poliovirus. These results suggested that the developed microcarrier should be unprecedented in permitting high-yield vaccine production by means of a serum-free culture.     

In vivo visual reporter system for detection of estrogen-like substances by transgenic medaka

Detection of endocrine disrupting chemicals, in particular, environmental estrogens with living organisms, has many advantages if compared to chemical analysis. The screening of novel pollutants with meaningful endpoints, the integration of uptake, bioconcentration, and excretion as well as the evaluation of endocrine disrupting effects with respect to toxicity require in vivo biotests for estrogen-like substances (ELSs). Critical disadvantages of whole organism biotests are their low sensitivity and the need for laborious and time-consuming work. To overcome these problems, we have developed a transgenic medaka strain harboring the green fluorescence protein (GFP) gene driven by choriogenin H gene regulatory elements. Choriogenin H is an egg envelope protein induced by estrogens in the liver. With yolk sac larvae of this strain, GFP induction in liver was observed 24 h after onset of aqueous exposure to 0.63 nM 17beta-estradiol (E2), 0.34 nM ethynylestradiol, or 14.8 nM estrone. Furthermore, concentrated sewage treatment effluent induced GFP expression. Comparison of E2 equivalents estimated by GFP-induction in transgenic medaka, a YES assay, and GC/MS showed detection limits in the same order of magnitude. These results indicated that the sensitivity of the transgenic medaka strain was sufficient for application as an alternative model in monitoring environmental water samples for ELSs.     

Mumefural and related HMF derivatives from Japanese apricot fruit juice concentrate show multiple inhibitory effects on pandemic influenza A (H1N1) virus

Fruit-juice concentrate of Japanese apricot (Prunus mume Sieb. et Zucc.) has been shown to be effective against influenza A infection in MDCK cells. In this study, we isolated five components from the fruit-juice concentrate of Japanese apricot, 5-(hydroxymethyl)-2-formylfuran (HMF), 1-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (mumefural, MF), 2-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (MF‘), 1-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA1) and 2-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA2), and investigated their inhibitory activities against the novel influenza A/Narita/1/2009 (H1N1) pandemic virus hemagglutinin and neuraminidase functions, which are essential for viral attachment and budding, respectively. An hemagglutination inhibition assay indicated that MF and MF‘ were effective at minimum hemagglutination concentrations of 3.1 and 6.3 mM, respectively. An inhibition study for sialidase activity of the neuraminidase spike showed that MF was the most active anti-sialidase compound with an IC₅₀ value of 0.21 ± 0.01 mM, followed by MA2 (IC₅₀, 0.71 ± 0.09 mM), MA1 (IC₅₀, 1.64 ± 0.31 mM) and MF‘(IC₅₀, 1.62 ± 0.22 mM). Furthermore, MF was shown to inhibit the growth of the pandemic virus in a dose-dependent manner (62 ± 3% inhibition at 5 mM). The results suggest that MF, a citric acid ester linked to HMF at the 1-position of the propane backbone, might be a lead compound for the development of anti-influenza A inhibitors.     

Evaluation of MPN method combined with PCR procedure for detection and enumeration of Vibrio parahaemolyticus in seafood

Vibrio parahaemolyticus densities in spiked and naturally contaminated seafood samples were enumerated by the MPN method combined with a PCR procedure (MPN-PCR method) targeting the species-specific thermolabile hemolysin gene (tlh), and by the MPN method using subcultivation of alkaline-peptone-water (APW) enrichment culture on thiosulfate-citrate-bile-sucrose (TCBS) agar (MPN-TCBS method). In the samples spiked with both V. parahaemolyticus and V. alginolyticus, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were similar to, or higher than the numbers of spiked cells, whereas those enumerated by the MPN-TCBS method were below the numbers of spiked cells. In naturally contaminated seafood samples, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were higher than those by the MPN-TCBS method. In the case of the MPN-TCBS method, isolation of V. parahaemolyticus from some APW cultures was difficult because of the overgrowth of many colonies other than V. parahaemolyticus (e.g., V. alginolyticus) on TCBS agar. In contrast, the PCR technique could detect tlh from APW culture without isolation of V. parahaemolyticus, so the possibility of failing to obtain a positive result in APW culture by the MPN-PCR method was considered to be lower than that by the MPN-TCBS method. Furthermore, utilization of the PCR technique reduces the time and labor required for the biochemical identification tests used in the MPN-TCBS method. For the detection and enumeration of V. parahaemolyticus in seafood, especially for samples that show many colonies other than V. parahaemolyticus on TCBS agar, the MPN-PCR method may be more convenient and reliable than the MPN-TCBS method.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.