Thermodynamic investigations of liquid Bi-Na and Sn-Na alloys by coulometric titration using β″-alumina

The following double galvanic cell was assembled and the thermodynamic properties of liquid Bi-Na and Sn-Na alloys, and the ion selectivity of -alumina during coulometric titration, were investigated. Mo, Na(I)¦-alumina¦M-Na(I), Mo [I] M-Na(I)¦-alumina¦Au + Au₂Na, Mo [II] (M = Bi or Sn) where M-Na(1) and Au + Au₂Na were used as the common electrode and reference electrode, respectively. Sodium was coulometrically titrated through the -alumina electrolyte of cell I both ways, and the EMFs were measured. It was found that no ion-exchange reaction occurs between the liquid alloys and the -alumina, and only Na was transferred in the -alumina during coulometric titrations. The thermodynamic properties of liquid Sn-Na and Bi-Na alloys were found to be in agreement with the literature.     

Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements

The time dependency of the amounts of corrosion products and co-existing adsorbed water on copper in humid air containing SO₂ was estimated from a series of in situ time-resolved IR-RAS spectra on the basis of the relations between the band intensities and the mass changes of the corrosion products, which were determined by simultaneous measurement of IR-RAS and QCM. The amounts of both corrosion products increased slowly at the initial stage and later increased rapidly. Although the relative humidity was kept constant, the amount of adsorbed water increased nearly the same behavior as that of corrosion products in the stage of relatively small amounts of corrosion products and later increased rapidly when the amounts of corrosion products increased. In humid air without SO₂, sulfite gradually decomposed and some of it changed into sulfate.     

COLOURING OF PURE IRON AFTER Ti~＋-O~＋ DUAL ION IMPLANTATION

用电化学的方法对经Ｔｉ~＋－Ｏ~＋二重离子注入后的钝铁表面进行处理，可呈现出深蓝、海蓝、褐、紫、金黄、淡黄等颜色用Ｘ射线光电子能谱（ＸＰＳ）对着色表面进行分析，发现表层有ＴｉＯ＿２富集，证明存在钛的氧化物是着色的必要条件．同时着色后的表面存在Ｔｉ的浓化层，着色的深浅程度与钛的浓度有关     

Meter-scale large area LED-embedded light fabric for the application of fabric ceilings in rooms

We have developed a meter-scale light emitting diode (LED)-embedded light fabric and its weaving machine for application to a light device for fabric ceilings, which have recently become desired for lightweight safe ceilings in Japan and other countries with frequent earthquakes. The LED fabric structure is 1.2-m-wide woven fabric that has 5-mm-wide LED chip-mounted printed circuit board (PCB) tapes as wefts. LEDs are mounted on the tape of PCBs with a reel-to-reel chip mounting system. Then, the LED-mounted tapes are woven with a developed automatic looming machine that aligns the weft with an accuracy of 0.9 mm, which is suitable for precise arrangement of LEDs and wiring to power supply. A 1.2 × 1.2 m LED-embedded light fabric weighing 320 g/m² was woven. The luminance of the LED fabric is 353 lx at a distance of 1 m, which is the luminance of conventional office lighting. The temperature increase of LEDs without a rigid cooling aluminum plate is only 5.8 °C, and the LED fabric is flexible enough to sustain 1,000 bends down to a radius of 3 mm. This LED fabric and its weaving technology will lead to light devices that have lightweight, large area, and high flexibility for fabric ceilings, walls, and other large areas in homes and offices.     

Characterization of the Advanced Satellite for Cosmology and Astrophysics x-ray telescope: preflight calibration and ray tracing

The x-ray properties of multinested thin-foil mirror x-ray telescopes (XRT's) on board ASCA, the Advanced Satellite for Cosmology and Astrophysics, were fully evaluated with an x-ray pencil beam.Scanning over the telescope aperture of 35 cm in diameter with an x-ray pencil beam, we found the effective area of a set of XRT's to be 325, 200, and 113 cm(2) at energies of 1.5, 4.5, and 8.0 keV, respectively. We derive the point-spread functions (PSF's) of the XRT's by measuring the image profile at the focal plane with an x-ray CCD. The PSF is found to exhibit a sharp core concentrated within 30 arcsec and a broad wing extended to 3 arcmin in half-power diameter. We also evaluate the contribution of stray light, which is caused by the single reflection of x rays by primary or secondary mirrors and by the backside reflection of the mirrors. To obtain the characteristics of the XRT in the energy region of 0.5-10.0 keV, incorporated with the measurements at discrete energies, we develop a ray-tracing method with the telescope design parameter, the PSF, and optical constants. In particular, we obtain the optical constants around the gold-atom M shell (Au-M) absorption-edge energies by measuring the reflectivity of our mirror sample, with monochromatized x-rays in the energy range of 2.0-3.5 keV from synchrotron radiation. Taking into account the PSF's and optical constants, we find that our ray-tracing program can reproduce all these XRT performances.     

Incoherent-only joint-transform correlator

An incoherent-only optical and electronic digital joint-transform correlator is proposed. A technique for the removal of extraneous signals inherent in the incoherent-only joint-transform correlator is also presented. A computer simulation and experimental results confirm the performance of the proposed incoherent-only joint-transform correlator.     

Linearized method: A new approach for kinetic analysis of central dopamine D(2) receptor specific binding

We proposed a new method (;linearized method') to analyze neuroleptic ligand-receptor specific binding in a human brain using positron emission tomography (PET). We derived the linear equation to solve four rate constants, k(3), k(4), k(5), k(6) from PET data. This method does not demand a radioactivity curve in plasma as an input function to the brain, and can perform fast calculations in order to determine rate constants. We also tested the nonlinearized method including nonlinear equations which is a conventional analysis using plasma radioactivity corrected for ligand metabolites as an input function. We applied these methods to evaluate dopamine D(2) receptor specific binding of [(11)C] YM-09151-2. The value of B(max)/K(d)=k(3)/k (4) obtained by the linearized method was 5.72+/-3.1 which was consistent with the value of 5.78+/-3.4 obtained by the nonlinearized method.     

Induction and intracellular localization of a 72-kDa heat shock protein in rat gastric mucosa after water-immersion stress

We investigated the expression and changes in the intracellular localization of a 72-kDa heat shock protein (HSP72) in rat gastric pyloric and fundic mucosa before and after water-immersion stress. Severe mucosal damage was found in the fundic mucosal area of the stomach after this stress. However, no mucosal lesion developed in the pyloric mucosal area. HSP72 in both the soluble and insoluble fractions of the pyloric and the fundic mucosal areas was significantly increased after water-immersion stress, peaking 6h after the initiation of the stress. The increase in HSP72 was more significant in the pyloric mucosal area than in the fundic mucosal area under both normal and stress conditions. The increase of HSP72 in the pyloric mucosal cells occurred prior to the formation of the mucosal lesions, whereas the increase of HSP72 in the fundic mucosal cells was observed after ulcer formation. An immunohistochemical study showed that HSP72 was constitutively expressed in the cytoplasm of the gastric mucosal cells, and that the intranuclear induction of HSP72 was remarkably intense in the pyloric mucosal cells, especially in the proliferative zone, compared with the fundic mucosal cells. Our results may suggest that HSP72 has an important cytoprotective function in gastric mucosal cells and that there is a "biophysical" difference between pyloric and the fundic mucosal cells.     

On-chip Diamond MEMS Magnetic Sensing through Multifunctionalized Magnetostrictive Thin Film

Electrically integrable, high-sensitivity, and high-reliability magnetic sensors are not yet realized at high temperatures (500 °C). In this study, an integrated on-chip single-crystal diamond (SCD) micro-electromechanical system (MEMS) magnetic transducer is demonstrated by coupling SCD with a large magnetostrictive FeGa film. The FeGa film is multifunctionalized to actuate the resonator, self-sense the external magnetic field, and electrically readout the resonance signal. The on-chip SCD MEMS transducer shows a high sensitivity of 3.2 Hz mT⁻¹ from room temperature to 500 °C and a low noise level of 9.45 nT Hz^−1/2 up to 300 °C. The minimum fluctuation of the resonance frequency is 1.9 × 10⁻⁶ at room temperature and 2.3 × 10⁻⁶ at 300 °C. An SCD MEMS resonator array with parallel electric readout is subsequently achieved, thus providing a basis for the development of magnetic image sensors. The present study facilitates the development of highly integrated on-chip MEMS resonator transducers with high performance and high thermal stability.     

Magnetically coupled oscillators applicable to high-sensitivity mass detection

Microsystem Technologies - In this paper, a system of magnetically coupled oscillators consisting of a Π-shaped horizontal cantilever and a rectangular vertical cantilever with a frequency...