Consideration of Energy Dissipation for the Strength of Adhesive Joints

For some adhesive joints where the main difference is the degree of contact at the interface, failure occurs not at the interface, but some distance away in the polymer itself. This cohesive mode of failure in the polymer was always found to be the case in our studies of cupric oxide to branched polyethylene interfaces, even where the joint was so weak that the peeled surface seemed clean of the polymer to the naked eye. It was observed that the strength of the joint was associated with the coarseness of the texture of the peeled surface of the polymer. With a differential scanning calorimetry technique we have shown that the coarseness of the surface texture and therefore the strength of the joint, is a direct function of the amount of polymer involved in plastic deformation. The strength criteria for the adhesive joint of this kind is thus the energy of deformation and not the maximum tensile stress that the material can withstand.     

Immunological Effects of Oenothein B,an Ellagitannin Dimer,on Dendritic Cells

Oenothein B is a unique macrocyclic ellagitannin dimer that has been found in various medicinal plants belonging to Onagraceae, Lythraceae, and Myrtaceae, with diverse biological activities. The immunological effects of tannins in terms of cytokine-release from macrophages and monocytes have been discussed, while the effects on other immunocompetent cells have been the subject of minimal investigation. We evaluated the immunomodulatory effects induced by tannin treatment in human dendritic cells (DCs), which play a critical role in the initial immune response, by measuring the changes in cytokine production, cell differentiation, and cell viability. Oenothein B showed significant down-regulation of the expression of cell surface molecules, CD1a and CD83, suggesting the inhibition of DC differentiation and/or maturation. The suppressive effect on DCs was associated with the induction of apoptosis without the activation of caspase-3/7, 8, and 9, and this was supported by the morphological features indicating significant nuclear condensation. Oenothein B also markedly suppressed the production of inflammatory cytokines, such as IL-1β and IL-6, in a dose-dependent manner. These data may, in part, be able to explain the traditional use of tannin-containing medicinal plants for the treatment of a variety of inflammatory diseases, including inflammatory bowel disease, celiac disease, and rheumatoid arthritis.     

Active sites deterioration of MgCl2‐supported catalyst induced by the electron donor extraction by alkylaluminium

To investigate the role of the internal donor in a Ziegler–Natta catalyst, the nature and existing states of the internal donor were intentionally varied by alkylaluminium treatment before polymerization, and the catalytic properties during propene polymerization were accurately evaluated using the stopped‐flow method. A significant decrease in the amount of the remaining internal donor was observed during the initial stage of the extraction. The polymerization results show a gradual decrease in the polymer isotacticity with an increase in the extraction time. These different patterns, as a function of the extraction time, indicate that the amount of the remaining internal donor is not directly related to the isotacticity of the produced polymer. © 2002 Society of Chemical Industry     

Enhanced Development of Azoxymethane-Induced Colonic Preneoplastic Lesions in Hypertensive Rats

Metabolic syndrome is associated with an increased risk of colorectal cancer. This study investigated the impact of hypertension, a component of metabolic syndrome, on azoxymethane (AOM)-induced colorectal carcinogenesis using SHRSP/Izm (SHRSP) non-diabetic/hypertensive rats and SHRSP.Z-Lepr^fa/IzmDmcr (SHRSP-ZF) diabetic/hypertensive rats. Male 6-week-old SHRSP, SHRSP-ZF, and control non-diabetic/normotensive Wister Kyoto/Izm (WKY) rats were given 2 weekly intraperitoneal injections of AOM (20 mg/kg body weight). Two weeks after the last injection of AOM, the SHRSP and SHRSP-ZF rats became hypertensive compared to the control WKY rats. Serum levels of angiotensin-II, the active product of the renin-angiotensin system, were elevated in both SHRSP and SHRSP-ZF rats, but only the SHRSP-ZF rats developed insulin resistance, dyslipidemia, and hyperleptinemia and exhibited an increase in adipose tissue. The development of AOM-induced colonic preneoplastic lesions and aberrant crypts foci, was significantly accelerated in both SHRSP and SHRSP-ZF hypertensive rats, compared to WKY normotensive rats. Furthermore, induction of oxidative stress and exacerbation of inflammation were observed in the colonic mucosa and systemically in SHRSP and SHRSP-ZF rats. Our findings suggest that hypertension plays a role in the early stage of colorectal carcinogenesis by inducing oxidative stress and chronic inflammation, which might be associated with activation of the renin-angiotensin system.     

The physical character of coal char formed during rapid pyrolysis at high pressure

Rapid pyrolysis was conducted in a drop tube reactor using seven coals under various operating conditions. In addition to dense char, porous chars (network char and cenospheric char) were formed by the rapid pyrolysis under certain conditions. Porous char was mainly composed of film-like carbon and skeleton carbon. The pyrolyzed coal char particles were characterized in detail. Morphology and bulk density of porous char were quite different from the dense char formed under the same conditions, but elemental composition and BET surface area were similar to each other. CO₂ gasification reactivity of porous char was lower than dense char in the later gasification stage, and this was ascribed to the low reactivity of skeleton carbon.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.     

The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

Use of solid phase microextraction (SPME) for profiling the volatile metabolites produced by Glomerella cingulata

The profile of volatile organic compounds (VOCs) released from Glomerella cingulata using solid phase microextraction (SPME) with different fibers, Polydimethylsiloxane (PDMS), Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), Carboxen/Polydimethylsiloxane (CAR/PDMS) and Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS), was investigated. C4-C6 aliphatic alcohols were the predominant fraction of VOCs isolated by CAR/PDMS fiber. Sesquiterpene hydrocarbons represented 20.3% of VOCs isolated by PDMS fiber. During the growth phase, Ochracin was produced in the large majority of VOCs. 3-Methylbutanol and phenylethyl alcohol were found in the log phase of it. Alcohols were found in cultures of higher age, while sesquiterpenes were found to be characteristic of initial growth stage of G. cingulata.     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

For gas metal arc welding, the effect of CO₂ mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO₂ shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO₂ shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.