The use of indoline dyes in a zinc oxide dye-sensitized solar cell

The effects of the position and the type of carboxyl anchor group in double rhodanine-type indoline dyes on the performance of a zinc oxide dye-sensitized solar cell were examined. The optimum position for the carboxymethyl group was on the inner rhodanine moiety; a carboxymethyl group gave optimum results among carboxymethyl, -ethyl, and -propyl derivatives.     

Non-destructive determination of acid–brix ratio of tomato juice using near infrared spectroscopy

Consumer's acceptance of tomato juice depends on its sourness to sweetness ratio and measuring this is important for quality control and marketing. Traditional methods destroy the samples, are time consuming and cannot be used in continuous packing or bottling systems. A non‐destructive method of quality evaluation, using near infrared (NIR) techniques, was tested, by using a portable NIR measuring unit. Spectra of tomato juice of known acid and brix values were determined and, in the wavelength range 703–1124 nm (NIR), a calibration model for acid–brix ratio (ABR) was developed, by using unscrambler software. When used to predict ABR of tomato juice statistical analysis showed minimal standard error (0.009) and satisfactorily high correlation coefficients (0.92) over the wavelength range 1059.5–1124.8 nm, for both calibration and prediction. These values were hardly different from analytical results and the NIR model has potential for non‐destructive prediction of ABR of tomato juice.     

Long Preservation of AAV-Transduced Fluorescence by a Modified Organic Solvent-Based Clearing Method

The development of tissue clearing technologies allows 3D imaging of whole tissues and organs, especially in studies of the central nervous system innervated throughout the body. Although the three-dimensional imaging of solvent-cleared organs (3DISCO) method provides a powerful clearing capacity and high transparency, the rapid quenching of endogenous fluorescence and peroxide removal process decreases its practicability. This study provides a modified method named tDISCO to solve these limitations. The tDISCO protocol can preserve AAV-transduced endogenous EGFP fluorescence for months and achieve high transparency in a fast and simple clearing process. In addition to the brain, tDISCO was applied to other organs and even hard bone tissue. tDISCO also enabled us to visualize the long projection neurons and axons with high resolution. This method provides a fast and simple clearing protocol for 3D visualization of the AAV- transduced long projection neurons throughout the brain and spinal cord.     

Consideration of Energy Dissipation for the Strength of Adhesive Joints

For some adhesive joints where the main difference is the degree of contact at the interface, failure occurs not at the interface, but some distance away in the polymer itself. This cohesive mode of failure in the polymer was always found to be the case in our studies of cupric oxide to branched polyethylene interfaces, even where the joint was so weak that the peeled surface seemed clean of the polymer to the naked eye. It was observed that the strength of the joint was associated with the coarseness of the texture of the peeled surface of the polymer. With a differential scanning calorimetry technique we have shown that the coarseness of the surface texture and therefore the strength of the joint, is a direct function of the amount of polymer involved in plastic deformation. The strength criteria for the adhesive joint of this kind is thus the energy of deformation and not the maximum tensile stress that the material can withstand.     

Multi-component co-condensation model of Ti-based boride/silicide nanoparticle growth in induction thermal plasmas

Numerical analysis is conducted for the titanium-based boride and silicide nanoparticle synthesis using an induction thermal plasma including the material evaporation process and the nanoparticle growth process with nucleation and co-condensation. Both systems present the nano-scaled particle size distributions. Ti-B system shows the smaller particle diameter, sharper distribution, larger particle number density, and wider range of the composition than Ti-Si system. Ti-Si system provides a narrower range of the silicon content due to the simultaneous co-condensation of titanium and silicon. Finally the correlation between the particle size and the nonmetal content of the synthesized nanoparticles is presented on a chart.     

Simple and quick turnaround time fabrication process for deepsubmicrometer CMOS generation

Process simplification and turnaround time reduction for deep submicrometer CMOS fabrication are discussed. Process step analysis is carried out for standard 1Poly/1Metal CMOS structure, and consequently, both isolation and gate formation processes are extracted as items for process simplification. A combination of shallow trench isolation with retrograde well structure and single mask step well/gate doping technique is proposed for deep submicrometer CMOS fabrication. This simplified CMOS process can achieve a reduction of five mask steps and eliminates both well drive-in annealing and field oxidation without performance deterioration. As a result, a 10% process step reduction and a 20% manufacturing turnaround time reduction have been realized in comparison to the standard 1Poly/1Metal CMOS process with LOCOS isolation     

Improvement in stabilization of launching performance and launching velocity using linear accelerator

This paper describes the improvements in launching stability and launching velocity of the linear accelerator (LAC). The authors have designed and produced a railgun using the LAC for weaving loom shuttles. The LAC is an electromagnetic launcher which enables a projectile to be launched at a speed of more than 50 m/s. Basically, it consists of a unipole linear dc motor and operates the same principle as dc rotary motors, the most difficult problem in this system being the stabilization of the current collection on the projectile. Then, various launch experiments have been conducted. As a result, the carbon projectile was launched at a speed of 73 m/s using double-state-type LAC.     

16 dB 80 GHz InGaP/GaAs HBT distributed amplifier

A high-gain and broadband distributed amplifier using high-performance high-reliability InGaP/GaAs HBTs is reported. A novel two-block configuration is used in gain cells in this distributed amplifier, which achieves a bandwidth of 80 GHz with a gain of 16 dB, resulting in a gain-bandwidth product of 504 GHz.