In Vivo Digestibility of Carbohydrate Rich in Isomaltomegalosaccharide Produced from Starch by Dextrin Dextranase

Slowly digestible carbohydrates are needed for nutritional support in diabetic patients with malnutrition. They are a good source of energy and have the advantage that their consumption produces a low postprandial peak in blood glucose levels because they are slowly and completely digested in the small intestine. A high-amount isomaltomegalosaccharide containing carbohydrate (H-IMS), made from starch by dextrin dextranase, is a mixture of glucose polymers which has a continuous linear structure of α-1,6-glucosidic bonds and a small number of α-1,4-glucosidic bonds at the reducing ends. It has a broad degree of polymerization (DP) distribution with glucans of DP 10－30 as the major component. In our previous study, H-IMS has been shown to exhibit slow digestibility in vitro and not to raise postprandial blood glucose to such levels as that raised by dextrin in vivo. This marks it out as a potentially useful slowly digestible carbohydrate, and this study aimed to evaluate its in vivo digestibility. The amount of breath hydrogen emitted following oral administration of H-IMS was measured to determine whether any indigestible fraction passed through to and was fermented in the large intestine. Total carbohydrate in the feces was also measured. H-IMS, like glucose and dextrin, did not result in breath hydrogen excretion. Carbohydrate excretion with dietary H-IMS was no different from that of glucose or water. These results show that the H-IMS is completely digested and absorbed in the small intestine, indicating its potential as a slowly digestible carbohydrate in the diet of diabetic patients.     

Cell-Level Analysis Visualizing Photodynamic Therapy with Porphylipoprotein and Talaporphyrin Sodium

We revealed the difference in the mechanism of photodynamic therapy (PDT) between two photosensitizers: porphylipoprotein (PLP), which has recently attracted attention for its potential to be highly effective in treating cancer, and talaporphyrin sodium (NPe6). (1) NPe6 accumulates in lysosomes, whereas PLP is incorporated into phagosomes formed by PLP injection. (2) PDT causes NPe6 to generate reactive oxygen species, thereby producing actin filaments and stress fibers. In the case of PLP, however, reactive oxygen species generated by PDT remain in the phagosomes until the phagosomal membrane is destroyed, which delays the initiation of RhoA activation and RhoA*/ROCK generation. (4) After the disruption of the phagosomal membrane, however, the outflow of various reactive oxygen species accelerates the production of actin filaments and stress fibers, and blebbing occurs earlier than in the case of NPe6. (5) PLP increases the elastic modulus of cells without RhoA activity in the early stage. This is because phagosomes are involved in polymerizing actin filaments and pseudopodia formation. Considering the high selectivity and uptake of PLP into cancer cells, a larger effect with PDT can be expected by skillfully combining the newly discovered characteristics, such as the appearance of a strong effect at an early stage.     

Densification of Nanocrystalline Yttria by Low Temperature Spark Plasma Sintering

We investigated the densification of undoped, nanocrystalline yttria (Y₂O₃) powder by spark plasma sintering (SPS) at sintering temperatures between 650°C and 1050°C at a heating rate of 10°C/min and an applied stress of 83 MPa. In spite of the low sinterability of the undoped Y₂O₃, a remarkable densification of the powder started at about 600°C, and a theoretical density of more than 97% was achieved at a sintering temperature of 850°C with a grain size of about 500 nm. The low temperature SPS is effective for fabricating dense Y₂O₃ polycrystals.     

Detection of antigens using a protein-DNA chimera developed by enzymatic covalent bonding with phiX gene A*

The chemical reactions used to make antibody-DNA conjugates in many immunoassays diminish antigen-binding activity and yield heterogeneous products. Here, we address these issues by developing an antibody-based rolling circle amplification (RCA) strategy using a fusion of φX174 gene A* protein and Z(mab25) (A*-Zmab). The φX174 gene A* protein is an enzyme that can covalently link with DNA, while the Z(mab25) protein moiety can bind to specific species of antibodies. The DNA in an A*-Zmab conjugate was attached to the A* protein at a site chosen to not interfere with protein function, as determined by enzyme-linked immunosorbent assay (ELISA) and gel mobility shift analysis. The novel A*-Zmab-DNA conjugate retained its binding capabilities to a specific class of murine immunoglobulin γ1 (IgG1) but not to rabbit IgG. This indicates the generality of the A*-Zmab-based immuno-RCA assay that can be used in-sandwich ELISA format. Moreover, the enzymatic covalent method dramatically increased the yields of A*-Zmab-DNA conjugates up to 80% after a 15 min reaction. Finally, sensitive detection of human interferon-γ (IFN-γ) was achieved by immuno-RCA using our fusion protein in sandwich ELISA format. This new approach of the use of site-specific enzymatic DNA conjugation to proteins should be applicable to fabrication of novel immunoassays for biosensing.     

Access of Hydrogen-Radicals to the Peptide-Backbone as a Measure for Estimating the Flexibility of Proteins Using Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry

A factor for estimating the flexibility of proteins is described that uses a cleavage method of “in-source decay (ISD)” coupled with matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The MALDI-ISD spectra of bovine serum albumin (BSA), myoglobin and thioredoxin show discontinuous intense ion peaks originating from one-side preferential cleavage at the N-Cα bond of Xxx-Asp, Xxx-Asn, Xxx-Cys and Gly-Xxx residues. Consistent with these observations, Asp, Asn and Gly residues are also identified by other flexibility measures such as B-factor, turn preference, protection and fluorescence decay factors, while Asp, Asn, Cys and Gly residues are identified by turn preference factor based on X-ray crystallography. The results suggest that protein molecules embedded in/on MALDI matrix crystals partly maintain α-helix and that the reason some of the residues are more susceptible to ISD (Asp, Asn, Cys and Gly) and others less so (Ile and Val) is because of accessibility of the peptide backbone to hydrogen-radicals from matrix molecules. The hydrogen-radical accessibility in MALDI-ISD could therefore be adopted as a factor for measuring protein flexibility.     

Field attraction ofBiprorulus bibax Breddin (Hemiptera: Pentatomidae) to synthetic aggregation pheromone and (E)-2-hexenal,a pentatomid defense chemical

A synthetic blend of the aggregation pheromone [(3R,4S,1E)-3,4-bis(1-butenyl)tetrahydro-2-furanol, linalool, farnesol, and nerolidol] of the spined citrus bug,Biprorulus bibax, and the pentatomid defense chemical, (E)-2-hexenal, both attracted adultB. bibax to individual trees in citrus orchards. Lemon trees containing single glass vials with aggregation pheromone or (E)-2-hexenal were colonized by significantly greater numbers of reproductiveB. bibax than unbaited trees. There was no significant difference between the treatments and bug recruitment was not improved by using both treatments.B. bibax did not enter cylinder/funnel traps baited with aggregation pheromone but colonized trees containing the traps. Orange or lemon trees containing aggregation pheromone on orchard perimeters recruited significantly larger populations of emigrating, nonreproductiveB. bibax during fall than untreated trees. Nonreproductive bugs were not attracted to trees containing (E)-2-hexenal. The potential for using these semiochemicals as management tools forB. bibax is discussed.     

Dynamic evaluation of maximum power point tracking operation with PV array simulator

This paper presents an innovative method to measure the dynamic control ability of maximum power point tracking for PV inverters under the condition of irradiance fluctuation. The PV array I–V curve simulator is a kind of indoor testing facility and easy to be adopted by industries. Basic functions are given by a specially designed PV array I–V curve simulator composed of the active power load. Most of the parameters are controllable by sophisticated software with capability of treating a lot of 1-s data for a very long period of time. In this paper, detailed structure of the equipment is described and test examples are also given by using a commercial PV inverter.     

Evans'' syndrome associated with Graves'' disease

A 36-year-old woman who had had Graves' disease for 6 years was admitted with severe thrombocytopenia. Evans' syndrome was diagnosed. The patient's family history showed multiple cases of Graves' disease but no cases of Evans' syndrome. Both conditions in this patient improved with corticosteroid and thiamazole therapy. Several autoimmune antibodies were found, but a common autoimmune mechanism was not clearly shown. Although the combination of Graves' disease and Evans' syndrome had not occurred previously in her family, genetic factors may play an important role in the pathogenesis of both conditions.     

Design concept for wire-bonding reliability improvement by optimizing position in power devices

The most effective way to increase the reliability of wire bonds in IGBT modules is reduction of temperature difference between the aluminum wires and the device. However, this lowers the power handling capability of the modules. In this paper, we show that the configuration of aluminum wire bonds on power devices has a considerable effect on the temperature distribution of the device, and that the optimization of the layout by thermo-electric simulation can make the temperature distribution of the devices more uniform and consequently reduce the maximum junction temperature difference, ΔT_jmax. Tentative experiments showed that rearranging the bonding position resulted in reduction of ΔT_jmax by five to 8 °C, and that the chip temperature distribution estimated by the thermo-electric simulation was qualitatively similar to the actual measurement results. These results suggest that wire-bonding optimization by thermo-electric simulation can contribute not only to realizing more compact power modules but also to improving the module reliability.     

Relative damage evaluation of concrete in a road bridge by AE rate-process analysis

It is widely reported and realized that durability of concrete decreases due to such effects, as salt and chemical attack, freezing and thawing, and carbonation and fatigue. In existing structures mechanical damage of concrete has been practically estimated from the strength by a compression test and a rebound hammer test. For effective maintenance of concrete structures, it is necessary to evaluate quantitatively not only the strength of concrete but also the degree of damage. Quantitative damage evaluation of structural concrete is proposed by applying acoustic emission (AE) technique and damage mechanics. Consequently, damage evaluation is conducted on concrete cores of an existing structure. Core-samples were collected from an arch fragment of a reinforced concrete road bridge that had been in service for 87 years. Compressive strengths and Young’s moduli were measured during the compression test along with AE measurement. Dynamic Young’s moduli were also calculated from the longitudinal wave velocity. Thus the relative damages are quantitatively evaluated from static and dynamic Young's moduli and compared with results of AE rate-process analysis.