Effect of styrene–acrylonitrile on the electrical resistivity of polycarbonate/multiwalled carbon nanotube composites

Multiwalled carbon nanotube (MWCNT)‐filled polycarbonate (PC)/styrene–acrylonitrile (SAN) blends with a wide range of blend compositions were prepared by melt mixing in a rotational rheometer, and the effect of SAN on the electrical properties of the PC/MWCNT composites was studied. The structure/electrical property relationship was investigated and explained by a combination of MWCNT localization and blend morphology. Transmission electron micrographs showed selective localization of MWCNTs in the PC phase, regardless of the blend morphology. When the SAN concentration was 10–40 wt %, which corresponded to sea‐island (10–30 wt %) and cocontinuous (40 wt %) blend morphologies (PC was continuous in both structures), the electrical resistivity decreased with increases in the SAN content. The concept of an effective volume concentration of MWCNTs was used to explain this effect. When the SAN concentration was 70 wt % or higher, the electrical resistivity was very high because MWCNTs were confined in the isolated PC particles. In addition, SAN was replaced by other polymers [polystyrene, methyl methacrylate/styrene, and poly(methyl methacrylate)]; these yielded similar blend morphologies and MWCNT localization and showed the generality of the concept of effective concentration in explaining a decrease in the electrical resistivity upon the addition of a second polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

A kinetic investigation of thermally initiated emulsion copolymerization of styrene and methylmethacrylate without conventional initiators

The thermally initiated emulsion copolymerization of styrene (ST) and methyl methacrylate (MMA) was carried out in the absence of conventional initiators. The hydroperoxide (HPO) concentration in the monomers, sodium dodecyl sulfate (SDS), deionized water, and the formulation of those for emulsion copolymerization were measured. The HPO concentration in ST and MMA increased with the storage time, and were considered to be the major sources of HPO. The thermal decomposition of hydroperoxide in monomers, the thermal initiation of ST by Mayo mechanism, and the complex formation between SDS and the monomers were proposed to be three main sources of the radical generation. It was confirmed that new polymer particles were generated throughout the polymerization process, and consequently resulted in a broader distribution of polymer particle size, compared with that for conventional emulsion polymerization. Approximately 80 wt % of monomer conversion was obtained in the presence of SDS at 373 K in 24 h. The initiation rate of the 30 wt % monomer charge was faster than those of 10 wt % and 20 wt % monomer charge. The latex instability at higher solid content was improved by adding electrolyte to promote the electrostatic repulsion force between the polymer particles. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 455–467, 2002; DOI 10.1002/app.2343     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002     

Enhanced strain hardening in elongational viscosity for HDPE/crosslinked HDPE blend. I. Characteristics of crosslinked HDPE

Blending a crosslinked high‐density polyethylene (xHDPE) enhances melt strength and strain hardening behavior in elongational viscosity of high‐density polyethylene (HDPE) to a great degree. Gel fraction of xHDPE has a stronger effect on the strain hardening than sol fraction, although sol fraction also enhances the strain hardening to some degree. Further, the xHDPE crosslinked by peroxide in a compression mold exhibits more pronounced effect than xHDPE by radiation, which is attributed to the difference in the amount of the gel fraction. The xHDPE, which enhances the strain hardening, has sparse crosslink points in the network. Moreover, it was found from linear viscoelastic measurements, such as oscillatory modulus and relaxation modulus, that the xHDPE is characterized as a critical gel, which was also supported by the result of tensile testing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 73–78, 2002     

Melt viscosity and flow birefringence of polycarbonate

Melt viscosity and flow birefringence of bisphenol A-type polycarbonate were measured and analyzed by the application of rubber-like photoelastic theory. The melt viscosity in the Newtonian flow region increased with the molecular weight to the power of 3.4. In polycarbonate, the shear stress of the Newtonian flow region was to 10⁶ dyn/cm², whereas in PMMA it was at most 3 = 10⁵ dyn/cm². The flow birefringence δn has a linear relation with shear stress S, that is δn = 5.7 × 10^?10 S. The principal polarization difference of flow unit α₁ – α₂ was 1.62 × 10^?23 cm³, which was obtained by the application of the rubber-like elastic theory. In PMMA, it was 3.9 = 10^?25 cm³; about 1/40 of that was polycarbonate. The anisotropy of polarizability of the flow unit of polycarbonate was also about 40 times larger than that of PMMA. So the anisotropy reflected the large flow birefringence of the polycarbonate.     

Modification of Rheological Properties Under Elongational Flow by Addition of Polymeric Fine Fibers

A new technique to provide melt elasticity using flexible fine fibers prepared from a polymer with high melting point is demonstrated. A polymer composite of poly(propylene) with a small amount of fine fibers of poly(butylene terephthalate) shows marked strain‐hardening behavior in elongational viscosity, i.e., a rapid increase in the transient elongational viscosity with time or strain. The blend also shows prominent normal stress difference at steady shear. These elastic properties have not been observed for polymer composites with rigid fibers and can be applicable to the modification of rheological properties and thus the improvement of processability.

     

Effect of Phosphorus Ions on the Proton Conductivity in the Sol–Gel-Derived Porous Glasses

The effect of phosphorus ions on the proton conductivity was examined for the sol–gel-derived glasses. The porous glasses were prepared through hydrolysis of PO(OCH₃)₃ and Si(OC₂H₅)₄, in which the phosphorus ions consisted of the POH bonds and were dissolved into the silica matrix without any P-O-Si bond. The electrical conductivity increased in a humid atmosphere and reached ∼30 mS/cm at 50°C under 70% RH. High conductivity is achieved by both the POH bonds and the molecular water bonded to the POH bonds. The conductivity increased with a change in humidity from 40% to 80% RH. The phosphorus ions were selectively dissolved in water, resulting in a lower conductivity.     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

Flow instability in capillary extrusion of plasticized poly(vinyl chloride)

Flow instability in a capillary extrusion is studied for a high molecular weight, plasticized poly(vinyl chloride) (PVC). The onset of melt fracture correlates with the long time relaxation ascribed to the generation and/or growth of PVC crystallites. An increase in the residence time in the cylinder leads to this long time relaxation and results in the melt fracture, although the apparent shear stress remains constant, irrespective of the residence time. The extrudate temperature and the species of the plasticizer also have a significant influence on the apparatus of the extruded products. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1277–1283, 2001