Pipe Heating System with Underground Water Tank for Snow Thawing and Ice Prevention on Roads and Bridge Decks

In order to prevent traffic accidents on snow-covered bridge decks, the writers developed a new pipe heating system that uses only groundwater stored in a large underground tank. The underground tank provides geothermal energy, i.e., groundwater of constant temperature, through heating pipes embedded in concrete pavements with no electric heater or fuel boiler. The pipe heating system was constructed at approximately 50% of the cost of comparable systems. In addition, there is a reduction of 10% in operating costs compared with the previous system. The present paper outlines its design and construction and provides fundamental data for the developed system. The piped heating system has kept the road conditions safe during the winter season by always removing the snow and ice from the heated road and bridge sections earlier than the surrounding roads. According to long-term temperature measurements, this system has prevented the road temperature from decreasing below 0°C, even through nighttime and morning periods. This report presents the system as an economical and effective solution for snow thawing and ice prevention.     

Highly photostable distributed-feedback polymer waveguide blue laser using spirobifluorene derivatives

In this study, we synthesized the new spirobifluorene derivatives; hexylbiphenyl-spirobifluorene (HBP-Spiro) and triphenylamine-spirobifluorene (TPA-Spiro) and demonstrated the operation of a distributed-feedback polymer waveguide blue laser. In addition, we investigated the optical and lasing properties of spirobifluorene derivatives including photostability. The experimental slope efficiency and the energy threshold of a HBP-Spiro-doped waveguide laser were 3.6% and 1.9 μJ, respectively. An operation lifetime of 27,000 shots was obtained for a pump-pulse duration of 1.2 ns and energy of 3.0 μJ at a wavelength of 355 nm.     

Transcriptional and functional responses of Escherichia coli O157:H7 growing in the lettuce rhizoplane

Lettuce and spinach are increasingly implicated in foodborne illness outbreaks due to contamination by Escherichia coli O157:H7. While this bacterium has been shown to colonize and survive on lettuce leaf surfaces, little is known about its interaction with the roots of growing lettuce plants. In these studies, a microarray analyses, mutant construction and confocal microscopy were used to gain an understanding of structure and function of bacterial genes involved in the colonization and growth of E. coli O157:H7 on lettuce roots. After three days of interaction with lettuce roots, 94 and 109 E. coli O157:H7 genes were significantly up- and down-regulated at least 1.5 fold, respectively. While genes involved in biofilm modulation (ycfR and ybiM) were significantly up-regulated, 40 of 109 (37%) of genes involved in protein synthesis were significantly repressed. E. coli O157:H7 was 2 logs less efficient in lettuce root colonization than was E. coli K12. We also unambiguously showed that a ΔycfR mutant of E. coli O157:H7 was unable to attach to or colonize lettuce roots. Taken together these results indicate that bacterial genes involved in attachment and biofilm formation are likely important for contamination of lettuce plants with Shiga toxin-producing E. coli strains.     

Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell

Heat and mass transfer with electrochemical reaction in an anode-supported flat-tube solid oxide fuel cell (FT-SOFC) is studied by means of three-dimensional numerical simulation. The distributions of the reaction fields in the anode-supported FT-SOFC are found to be similar to those in the planar SOFC with co-flow arrangement. However, in comparison with the latter, the concentration and activation overpotentials of the former can be reduced by additional reactant diffusion through the porous rib of the fuel channel. Parametric survey reveals that, for a fixed activation overpotential model, the output voltage can be improved by increasing the pore size of anode, while the cross-sectional geometry has smaller effect on the cell performance. Based on the results of three-dimensional simulation, we also develop a simplified numerical model of anode-supported FT-SOFC, which takes into account the concentration gradients in the thick anode of complex cross-sectional geometry. The simplified model can sufficiently predict the output voltage as well as the distributions of temperature and current density with very low computational cost. Thus, it can be used as a powerful tool for surveying wide range of anode-supported FT-SOFC design parameters.     

Detail analysis of fusion neutronics benchmark experiment for iron

In order to specify the best nuclear data on iron, the fusion neutronics benchmark experiment on iron at Japan Atomic Energy Agency (JAEA)/Fusion Neutronics Source (FNS) was analyzed in detail with MCNP-4C and the latest nuclear data libraries, JENDL-3.3, FENDL-2.1, JEFF-3.1 and ENDF/B-VII.0. As a result, totally the calculation result with ENDF/B-VII.0 agreed with the measurement best, except that it underestimated the measured neutron flux above 10 MeV with the depth. It was noted that the calculation result with JENDL-3.3 overestimated the measured neutrons below a few keV. Through the DORT calculations based on the iron data in ENDF/B-VII.0, it was found out that the first inelastic scattering cross-section data of ⁵⁷Fe in JENDL-3.3 caused the overestimation.     

Aging and Clonal Behavior of Hematopoietic Stem Cells

Hematopoietic stem cells (HSCs) are the only cell population that possesses both a self-renewing capacity and multipotency, and can give rise to all lineages of blood cells throughout an organism’s life. However, the self-renewal capacity of HSCs is not infinite, and cumulative evidence suggests that HSCs alter their function and become less active during organismal aging, leading ultimately to the disruption of hematopoietic homeostasis, such as anemia, perturbed immunity and increased propensity to hematological malignancies. Thus, understanding how HSCs alter their function during aging is a matter of critical importance to prevent or overcome these age-related changes in the blood system. Recent advances in clonal analysis have revealed the functional heterogeneity of murine HSC pools that is established upon development and skewed toward the clonal expansion of functionally poised HSCs during aging. In humans, next-generation sequencing has revealed age-related clonal hematopoiesis that originates from HSC subsets with acquired somatic mutations, and has highlighted it as a significant risk factor for hematological malignancies and cardiovascular diseases. In this review, we summarize the current fate-mapping strategies that are used to track and visualize HSC clonal behavior during development or after stress. We then review the age-related changes in HSCs that can be inherited by daughter cells and act as a cellular memory to form functionally distinct clones. Altogether, we link aging of the hematopoietic system to HSC clonal evolution and discuss how HSC clones with myeloid skewing and low regenerative potential can be expanded during aging.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Multimodal sensing and active continuous closed‐loop feedback for achieving reliable manipulation in the outdoor physical world

The use of field robots can greatly decrease the amount of time, effort, and associated risk compared to if human workers were to carryout certain tasks such as disaster response. However, transportability and reliability remain two main issues for most current robot systems. To address the issue of transportability, we have developed a lightweight modularizable platform named AeroArm. To address the issue of reliability, we utilize a multimodal sensing approach, combining the use of multiple sensors and sensor types, and the use of different detection algorithms, as well as active continuous closed‐loop feedback to accurately estimate the state of the robot with respect to the environment. We used Challenge 2 of the 2017 Mohammed Bin Zayed International Robotics Competition as an example outdoor manipulation task, demonstrating the capabilities of our robot system and approach in achieving reliable performance in the fields, and ranked fifth place internationally in the competition.     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Measurements of keV-neutron capture cross sections and capture gamma-ray spectra of 105Pd

The neutron capture cross sections and capture gamma-ray spectra of ¹⁰⁵Pd were measured in the region from 15 to 100 keV and at 585 keV. A neutron time-of-flight method was utilised with an anti-Compton NaI(Tl) spectrometer and a 1.5-ns pulsed neutron source by the ⁷Li(p,n)⁷Be reaction. The capture yields were obtained by applying a pulse-height weighting technique to the observed net capture gamma-ray pulse-height spectra. The capture cross sections of ¹⁰⁵Pd were derived with errors less than 5%, using the standard capture cross sections of ¹⁹⁷Au. The evaluated capture cross sections of JENDL-4.0 and ENDF/B-VII.1 were compared with the present results. The evaluations of JENDL-4.0 and ENDF/B-VII.1 were larger than the present results by 3%–15% in the region from 15 to 100 keV and at 585 keV. The capture gamma-ray spectra of ¹⁰⁵Pd were also derived by unfolding the observed net capture gamma-ray pulse-height spectra. The multiplicities of capture gamma rays of ¹⁰⁵Pd were obtained from the capture gamma-ray spectra.