The synthesis, characterization, thermal and optical properties of copper, nickel, and vanadyl complexes derived from azo dyes

Two, novel, tetradentate Schiff-base ligands, namely bis-5-phenylazosalicylaldehyde diethylenetriimine and bis-5-[(4-methoxyphenyl)azo]salicylaldehyde diethylenetriimine, as well as their Cu²⁺, Ni²⁺, and VO²⁺ complexes, were synthesized and characterized using elemental analysis, infrared and also UV–Visible spectroscopy, ¹HNMR and mass spectra. The thermal stability of the free ligands and the related metal complexes, as determined using differential scanning calorimetry and thermal gravimetric analysis, were found to be thermally stable upto 240–275 °C depending on the type of ligand and the central metal atom. The λ_max of the ligands and their transition metal complexes in the region 300–800 nm are discussed. The novel metal complexes offer potential for application as recording media owing to both their absorption spectra in the blue-violet light region and high thermal stability.     

Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology

In this work the response surface methodology (RSM) in conjunction with the central composite design (CCD) were used to optimize the activity of CaO/Al₂O₃ solid catalysts for the production of biodiesel. In order to measure the catalyst activity, we used palm oil as a representative raw material for the conversion to biodiesel. The biodiesel production was carried out in a batch laboratory scale reactor. The results showed that both the calcination temperature and the amount of calcium oxide loaded on the support had significant positive effects on the biodiesel yield. The maximum basicity and biodiesel yield obtained were about 194 μmol/g and 94%, respectively. Overall, the catalyst showed high performance at moderate operating conditions and its activity was maintained after two cycles.     

Design of RF MEMS Based Oscillatory Neural Network for Ultra High Speed Associative Memories

Microelectromechanical systems are utilized alongside with transistor amplifiers and resistive connections for implementing of oscillatory associative memories. Phase locking is studied in such a network and all requirements of the circuit level implementation are satisfied. A very high gain trans-impedance amplifier operating in 1 GHz in addition to a novel automatic amplitude control circuit is employed to remove amplitude dynamics of the system. Requiring resonator characteristics are extracted and calculated as well. A new method for initialization of the network is proposed. Each neuron consumes 1.08 mW from a 1.8 V power supply. The convergence time of a typical network trained by Hebbian rule is less than 1.5 ns which results in an ultra high speed analog signal processing system.     

Synthesis of lanthanum hydroxide and lanthanum oxide nanoparticles by sonochemical method

In this work lanthanum hydroxide nanoparticles were synthesized by sonochemical method. La₂O₃ nanoparticles were obtained after calcination of the La(OH)₃ nanoparticles precursor in air at 600 °C for 2 h. The effect of some parameters such as concentration of precursors, pulse time of sonication, time of sonication, and addition of PEG as surfactant on the morphology and the particle size were studied. The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrum (XPS) and Fourier transform infrared (FT-IR) spectra.     

Incorporating Nano-silica as a Binder to Improve Corrosion Resistance of High Alumina Refractory Castables

In this study, four types of castables as calcium-aluminate cement (CAC)-bonded and nano-silica (NS)-bonded castables based on tabular-alumina and bauxite aggregates were prepared to investigate the replacement of the calcium-aluminate cement by NS. All samples were allowed to dry at 110 °C then fired at 800 and 1200 °C. Bulk density and apparent porosity of samples were measured. The molten aluminum static corrosion test (cup test) results showed that NS-bonded specimens had higher resistance to corrosion compared to CAC-bonded samples (based on the measured average aluminum penetration depth into the refractory texture). However no penetration was observed in bauxite NS-bonded samples. The results were consistent with dynamic corrosion test in aluminum melt carried out at 800 °C for 100 h. The small pore size in NS-bonded castables was found to be the main cause for high corrosion resistance as micro-pores prevented the melt to penetrate into the refractory.     

Power quality impacts of high-penetration electric vehicle stations and renewable energy-based generators on power distribution systems

High-penetration renewable energy-based generators (REGs) in distribution systems have increased the importance of impact assessment involving these systems. This assessment focuses on power quality (PQ) and compatibility between REGs and existing system components. Electric vehicle (EV) technology has also recently achieved a substantial market share. This technology requires the development of charging stations similar to current petroleum fuelling stations in the near future. Thus, the effect of EV stations (EVSs) on PQ must also be considered. This study presents a PQ analysis on the effects of high-penetration EVS and REG systems, including wind turbines, grid-connected photovoltaics (PVs), and fuel cell (FC) power generation units on a modified 16-bus distribution system under different loading and weather conditions. All data on EVS, wind farm, PV, and FC units as well as weather conditions presented in this paper were collected from different power companies and the Malaysian Meteorological Department. The system is modelled and simulated using the MATLAB/Simulink software to study the effects of these technologies on system performances at various penetration levels. Simulation results indicated that the presence of high-penetration EVSs and REGs can cause severe PQ problems such as frequency and voltage fluctuations, voltage drop, harmonic distortion and power factor reduction.     

Estimation of stresses in atmospheric ice during aeolian vibration of power transmission lines

Aeolian vibration in bare and iced cable was simulated using the theory of cable vibration. High frequency vibration creates stresses in the cable and consequently in the ice covering that cable, which may result in ice failure and eventually ice shedding. These stresses were estimated in this study. Displacement of the cable during vibration was determined; furthermore, instantaneous wind loads in vertical and transverse directions, additional stresses induced by the motion in the cable and in the atmospheric ice, as well as torque due to cable springback were calculated. In order to simulate the loading conditions of a chunk of atmospheric ice in the middle of a span, a new model was developed using ABAQUS. Results from this model show in spite of high frequency vibration, the resulting level of stress in atmospheric ice is far less than its failure limit. In other words, the atmospheric ice under the condition assumed in this investigation does not shed due to aeolian vibration.     

Degradation of drag reducing polymers in aqueous solutions

The performance of drag reducing polymers in turbulent flow is restricted by their mechanical degradation. This study examines how the working fluid can affect the degradation behavior of diluted drag reducing polymeric solutions. Solutions having different proportions of tap water and de-ionized water served as the working fluids. Three commercially available water soluble polymeric agents, namely, an anionic copolymer of polyacrylamide, xanthan gum, and polyethylene oxide, were then added to these solutions. All experiments had identical flow rates corresponding to turbulent conditions in a laboratory scale pipe line. Variation of pressure drop in the pipe line was then measured for 2 hours. It was found that polymer degradation is accelerated in tap water solutions compared to that in de-ionized water solutions. However, this is dependent on the specification of the polymer used, namely, the molecular weight of the polymer and the rigidity of its molecular backbone. Furthermore, a new mathematical relation has been developed to investigate degradation of the polymers over time.     

Pricing mechanism for interconnection between phone operators and virtual mobile VoIP operators

Lately software based virtual mobile voice over Internet Protocol (VMVoIP) services have become available to end-users which may endanger profit of regular telephone operators from phone calls. In this situation, telephone operators should decide on a proper mechanism for interconnection with such VMVoIP operators which secures mutual benefit of both operators. In this paper, we study both monopolistic and oligopolistic markets of VMVoIP in which a single VMVoIP and several VMVoIP operators available in the market respectively. We model the interaction among a phone operator, VMVoIP operators and end-users as a leader-follower dynamic game and find a sub-game perfect Nash equilibrium (SPNE) for the game. The SPNE shows the phone operator’s best pricing strategy (i.e., wholesale price for VMVoIP operators and retail price for end-users) and its best decision on the interconnection with VMVoIP operators. We further study economic interpretation of the SPNE. We show that in specific end-users’ demands, the phone operator may increase its total profit by allowing the interconnection and taking right price discrimination strategy.