Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.     

Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity

The purpose of this paper is to study the characteristics of the combined convection heat transfer and a micropolar nanofluid flow passing through an impermeable stretching sheet in a porous medium. The nanofluid flow field is affected by a magnetic field perpendicular to the sheet. The dynamic viscosity of the micropolar nanofluid changes under the influence of the magnetic field. The continuity, linear momentum, angular momentum, and energy equations are first simplified using the order of magnitude technique that, along with the applied boundary conditions and the definition of the appropriate parameters, are transferred to the similarity space using the similarity analysis. Then the resulting equations are solved using the Runge–Kutta method.The distinction of the macroscale and microscale flow fields and temperature fields resulting from different nanoparticle shapes was clarified. Increasing the Hartmann number, the vortex viscosity parameter, the magnetic parameter, the nanoparticle volume fraction, and the permeability parameter of the porous media increased the surface friction on the sheet. Increasing the vortex viscosity parameter, the magnetic parameter, and the volume fraction of the nanoparticles increases the Nusselt number.     

Effects of preweaning total plane of milk intake and weaning age on intake,growth performance,and blood metabolites of dairy calves

The objective of this study was to evaluate the effects of preweaning total plane of milk intake and weaning age on intake, growth performance, and blood metabolites of dairy calves. A total of 48 Holstein calves (40 ± 1.6 kg of body weight) were used in a 2 × 2 factorial arrangement with the factors of weaning age (d 60 vs. 75) and the total plane of milk intake (medium vs. high) during the preweaning period. Calves were assigned to 1 of 4 treatments: (1) calves fed medium plane of milk (MPM) intake and weaned on d 60 of age (MPM-60d, 4 L/d of milk from d 3 to 10, 6 L/d of milk from d 11 to 55, and 3 L/d of milk from d 56 to 60 of age; total milk intake = 317 L), (2) calves fed MPM intake and weaned on d 75 of age (MPM-75d, 4 L/d of milk from d 3 to 10 and 4.5 L/d of milk from d 11 to 70 of age followed by feeding 2.25 L/d of milk from d 71 to 75 of age; total milk intake = 313 L), (3) calves fed high plane of milk (HPM) intake and weaned on d 60 of age (HPM-60d, 4 L/d of milk from d 3 to 10, 6 L/d of milk from d 11 to 20, and 8.5 L/d of milk from d 21 to 55 followed by feeding 4.25 L/d of milk from d 56 to 60 of age; total milk intake = ～411 L); and (4) calves fed HPM intake and weaned on d 75 (HPM-75d, 4 L/d of milk from d 3 to 10, and 6 L/d of milk from d 11 to 70 of age followed by feeding 3 L/d of milk from d 71 to 75 of age; total milk intake = 407 L) with no milk refusals. All of the calves were monitored up to d 90 of age. Regardless of weaning age, starter feed intake and dry matter intake (% of body weight) were lower in calves fed HPM compared with those receiving MPM. A tendency for the plane of milk intake × weaning age interaction was observed for metabolizable energy intake with the highest value was recorded with the HPM-75d calves. The lowest efficiency of metabolizable energy intake and average feed efficiency was observed in HPM-60d calves throughout the experimental period as compared with the other groups. An interaction was found between the total plane of milk intake and weaning age regarding effects on total average daily gain, average daily gain/metabolizable energy intake, feed efficiency, final body weight, and plasma β-hydroxybutyrate levels with the highest values measured in HPM-75d calves. Weaning on d 75 versus d 60 improved wither height and hip width, which tended to increase body length at the end of the trial. The results suggest that calves fed high amounts of milk during their preweaning period benefit from extending the time of weaning from 60 to 75 d of age based on average daily gain, feed efficiency, and final body weight.     

CFD modeling of flow and heat transfer in a thermosyphon

In the present study a gas/liquid two-phase flow and the simultaneous evaporation and condensation phenomena in a thermosyphon was modeled. The volume of fluid (VOF) technique was used to model the interaction between these phases. Experiments in a thermosyphon were carried out at different operating conditions. The CFD predicted temperature profile in the thermosyphon was compared with experimental measurements and a good agreement was observed. It was concluded that CFD is a useful tool to model and explain the complex flow and heat transfer in a thermosyphon.     

Simulation of gas–solid two-phase flow in the annulus of drilling well

This paper investigates the hydrodynamic behavior of gas–solid two-phase flow in the annular space of an air drilling well under different arrangements by using three-dimensional approach. Two-fluid model is used to solve the governing equations in the Eulerian–Eulerian framework. Effect of eccentricity and drill pipe rotation on the pressure drop, volume fraction and velocity profile are examined. The results are compared with available data in the literature and good agreement is found. The results show that the presence of solid particles in the annulus change the air velocity profile significantly and create two off-center peaks velocity close to the walls instead of one peak velocity in the middle. Eccentricity of drill pipe makes more accumulation of the cuttings in the smaller space of the annulus. Increasing the eccentricity increases pressure drop due to impact of particles with annulus wall and also particles collision with each other. Rotation of the drill pipe shifts maximum air velocity location toward smaller space of the annulus which results more uniform cutting distributions in the annulus and improvement in their transportations. Pressure drop in the annulus increases as eccentricity and rotation of drill pipe increase.     

Elaboration of Al2O3/PTFE icephobic coatings for protecting aluminum surfaces

In order to protect aluminum ground wires and phase conductors of overhead power lines against ice adhesion and excessive accretion, for ensuring safe and reliable power transmission during winter periods, a new coating with icephobic characteristics and satisfactory mechanical properties was developed. The method consisted in depositing an extremely adherent poly(tetrafluoroethylene) or PTFE coating on an Al₂O₃ underlayer produced by anodisation in either a phosphoric or an oxalic acid electrolyte. PTFE impregnation was carried out at low temperature (320 °C) and coating adhesion was assessed using tape and bend tests. These treatments resulted in highly hydrophobic surfaces with water contact angles lying between 130° and 140°. Ice shear stress was reduced by almost 2.5 times, and the PTFE coatings remained active after several ice shedding events. Morphologies and chemical compositions were studied using scanning electron microscopy, energy dispersive X-Ray analysis, as well as Fourier Transform Infra Red and X-Ray photoelectron spectroscopy.     

中间层成分对GTD-111/IN-718高温合金在瞬时液相连接过程中显微组织和力学性能的影响

研究使用不同的中间层瞬时液相连接两种异种高温合金的适用性.在1100℃、不同时间下瞬时液相连接GTD-111/IN-718体系,研究BNi-2、BNi-3和BNi-9三种类型的中间层对该体系显微组织和力学性能的影响.采用场发射扫描电子显微镜和能量色散光谱技术,研究接头区域的成分变化和显微组织.结果表明,非热凝固区Ni3...     

电池充电管理：新兴趋势

简介手机、便携式媒体播放器、便携式导航工具及蓝芽（Bluetooth）耳机等新一代手持装置不断缩小体积外型,同时加强效能与功能。就充电管理而言,这些强化的功能使得设计工程人员必须同时顾及用户的便利性与体验感受,以及整体充电时间与成本的均衡。     

Simultaneously energy production and dairy wastewater treatment using bioelectrochemical cells: In different environmental and hydrodynamic modes

A successful design, previously adapted for treatment of complex wastewaters in a microbial fuel cell (MFC), was used to fabricate two MFCs, with a few changes for cost reduction and ease of construction. Performance and electrochemical characteristics of MFCs were evaluated in different environmental conditions (in complete darkness and presence of light), and different flow patterns of batch and continuous in four hydraulic retention times from 8 to 30 h. Changes in chemical oxygen demand, and nitrate and phosphate concentrations were evaluated. In contrast to the microbial fuel cell operated in darkness (D-MFC) with a stable open circuit voltage of 700 mV, presence of light led to growth of other species, and consecutively low and unsteady open circuit voltage. Although the performance of theMFC subjected to light (L-MFC)was quite lowand unsteady in dynamic state (internal resistance = 100 Ω, power density = 5.15 W·m^-3), it reached power density of 9.2 W·m^-3 which was close to performance of D-MFC (internal resistance = 50 Ω, power density = 10.3 W·m^-3). Evaluated only for D-MFC, the coulombic efficiency observed in batch mode (30%) was quite higher than the maximum acquired in continuous mode (9.6%) even at the highest hydraulic retention time. In this study, changes in phosphate and different types of nitrogen existing in dairy wastewater were investigated for the first time. At hydraulic retention time of 8 h, the orthophosphate concentration in effluent was 84% higher compared to influent. Total nitrogen and total Kjeldahl nitrogen were reduced 70% and 99% respectively at hydraulic retention time of 30 h, while nitrate and nitrite concentrations increased. The microbial electrolysis cell (MEC), revamped from D-MFC, showed the maximum gas production of 0.2 m³ H₂·m^-3·d^-1 at 700 mV applied voltage.     

CFD and artificial neural network modeling of two-phase flow pressure drop

A large number of experiments in a 2 cm diameter and 6 m length tube were carried out in order to study the two-phase flow regimes and pressure drops in it. The two-phase flow in the experimental tube was modeled using commercial CFD code, Fluent 6.2. An Artificial Neural Network (ANN) with three inputs including gas and liquid velocities and tube slope was designed and trained to predict average pressure drop across the tube. The comparison between CFD and ANN predictions of pressure drops with experimental measurements shows that the CFD results are more accurate than the ANN evaluations for new conditions.