Application of the Kalman filter for electrical endurancecharacterization of insulating materials and systems

The Kalman filter algorithm is applied to the results of accelerated life tests performed on insulating materials and systems carried out for electrical endurance characterization purposes. It consists of a recursive procedure that applies to the failure-time percentiles obtained from life tests, on the basis of the inverse power or the exponential models, and provides estimates of the endurance indices which give particular weight to the results of the life tests performed at the lowest test stresses. This allows more meaningful endurance characterization and accurate life prediction. This paper provides the algorithms for Kalman filter applications, giving emphasis to error estimation, as well as the method for calculation of confidence limits of life-line parameters and predicted failure times. The proposed Kalman filter procedure is applied to the experimental results of accelerated life tests relevant to different insulating materials and systems     

Designing and upgrading model of pre-denitrification systems

This paper reports a three-substrate steady-state integrated model, whose unknowns are expressed in explicit terms once concentrations of nitrogen compounds in the effluent flow are fixed. The model can be applied both to design and to upgrade wastewater treatment plants. The model is also able to evaluate the flexibility of existing wastewater treatment plants, which represents the capacity of the system to operate under different working conditions caused by increases in influent load or reductions in effluent quality standards. In this case the admissible variation of influent load or effluent concentration can be measured using suitable dimensionless flexibility indexes.List of symbols Q influent flow [L³ T^–1] - R₁ sludge recycle flow ratio - R₂ aerated mixed liquor recycle flow ratio - V_D denitrification reactor volume [L³] - V_N nitrification reactor volume [L³] - S biodegradable organic substrate concentration [M L^–3] - N-NH₄ ammonia nitrogen concentration [M L^–3] - N-NO₃ nitrate nitrogen concentration [M L^–3] - N_tot total nitrogen concentration [M L^–3] - O₂ oxygen concentration in the nitrification reactor [M L^–3] - X_H heterotrophic biomass concentration [M L^–3] - X_AUT autotrophic biomass concentration [M L^–3] - maximum removal rate of biodegradable organic substrate for an assigned value of temperature [T^–1] - maximum removal rate of nitrate for an assigned value of temperature [T^–1] - maximum removal rate of ammonia nitrogen for assigned values of pH and temperature [T^–1] - _S removal rate of biodegradable organic substrate [T^–1] - _D removal rate of nitrate [T^–1] - _N removal rate of ammonia nitrogen [T^–1] - K_S saturation coefficient for biodegradable organic substrate [M L^–3] - K_D saturation coefficient for nitrate [M L^–3] - K_SD saturation coefficient for organic substrate in the denitrification kinetic [M L^–3] - K_N saturation coefficient for ammonia nitrogen [M L^–3] - saturation coefficient for oxygen [M L^–3] - Y_H yield coefficient for heterotrophic microorganisms in the biodegradable organic substrate removal process - Y_D yield coefficient for heterotrophic microorganisms in the nitrate nitrogen removal process - Y_AUT yield coefficient for autotrophic microorganisms in the ammonia nitrogen removal process - (X_H)_r heterotrophic biomass concentration in the recycle sludge [M L^–3] - (X_AUT)_r autotrophic biomass concentration in the recycle sludge [M L^–3] - biodegradable organic mass consumption for unitary nitrate nitrogen mass reduction in the denitrification reactor - nitrogen consumption in the biodegradable organic oxidation process by mean of heterotrophic biomass     

Layer-oriented simulation tool

The Layer-Oriented Simulation Tool (LOST) is a numerical simulation code developed for analysis of the performance of multiconjugate adaptive optics modules following a layer-oriented approach. The LOST code computes the atmospheric layers in terms of phase screens and then propagates the phase delays introduced in the natural guide stars' wave fronts by using geometrical optics approximations. These wave fronts are combined in an optical or numerical way, including the effects of wave-front sensors on measurements in terms of phase noise. The LOST code is described, and two applications to layer-oriented modules are briefly presented. We have focus on the Multiconjugate adaptive optics demonstrator to be mounted upon the Very Large Telescope and on the Near-IR-Visible Adaptive Interferometer for Astronomy (NIRVANA) interferometric system to be installed on the combined focus of the Large Binocular Telescope.     

A Formal Model for Video Shot Segmentation and its Application via Animate Vision

The first step in a video indexing process is the segmentation of videos into meaningful parts called shots. In this paper we present a formal model of the video shot segmentation process. Starting from a mathematical characterization of the most common transition effects, a video segmentation algorithm capable to detect both abrupt and gradual transitions is proposed. The proposed algorithm is based on the computation of an arbitrary similarity measure between consecutive frames of a video. The algorithm has been tested adopting a similarity metric based on the Animate Vision theory and results have been reported.     

The “presence of others” in a virtual environment: different collaborative modalities with hybrid resources

The purpose of this study is to see in which forms and under which conditions social presence turns into collaboration. Eight couples were asked to find some objects in a virtual environment in which collaboration was allowed but not mandatory. The qualitative analysis of the video recordings shows that all participants resorted to collaboration in forms that were justified by the requirements of the task, the environmental affordances and the different expertise.

A mosaicing approach for the acquisition and representation of 3D painted surfaces for conservation and restoration purposes

This paper describes an approach to the acquisition and representation of information on 3D painted surfaces (usually frescoes) based on the tassellation and mosaicing of the whole surface. The acquisition is carried out using an active vision system specifically designed for these purposes. In this paper, particular emphasis is placed on the mosaicing procedure of the acquired images, which, while conceptually simple, allows one to obtain very good results thanks to the effective exploitation of the features of the acquisition system. A careful qualitative and quantitative analysis of the performances of the system, obtained through tests on real scenes in the laboratory, is also presented.Received: 28 May 2001, Accepted: 8 November 2002, Published online: 18 June 2003 Correspondence to: Paolo GrattoniMassimiliano Spertino: With I.R.I.T.I. under grant N.202.12484 of the Italian Safeguard of Cultural Heritage C.N.R. project.     

Optimisation of a vehicle energy absorbing steel component with experimental validation

The paper deals with the optimisation of a tapered tubular steel component to be used as an energy-absorbing device in the front structure of a vehicle body. Aim of the optimisation problem is the minimisation of a load uniformity parameter evaluated as the ratio between the maximum and the average crushing loads. The optimisation problem takes into account two design variables describing a tapered geometrical configuration, the diameter of the component at one of its bounds and the tapering length. Two improved geometrical configurations have been found and have been experimentally tested to verify the numerical results with impact velocities up to 10 m/s.     

Obstacle Modelling Oriented to Safe Motion Planning and Control for Planar Rigid Robot Manipulators

Trajectory planning and tracking are crucial tasks in any application using robot manipulators. These tasks become particularly challenging when obstacles are present in the manipulator workspace. In this paper a n-joint planar robot manipulator is considered and it is assumed that obstacles located in its workspace can be approximated in a conservative way with circles. The goal is to represent the obstacles in the robot configuration space. The representation allows to obtain an efficient and accurate trajectory planning and tracking. A simple but effective path planning strategy is proposed in the paper. Since path planning depends on tracking accuracy, in this paper an adequate tracking accuracy is guaranteed by means of a suitably designed Second Order Sliding Mode Controller (SOSMC). The proposed approach guarantees a collision-free motion of the manipulator in its workspace in spite of the presence of obstacles, as confirmed by experimental results.     

Comparison of shear strength tests on AV119 epoxy-joined ceramics

The results of an experimental investigation on epoxy-joined CVD SiC and alumina tested in shear and apparent shear mode by four different configurations are presented. Ceramics have been joined by an epoxy adhesive (AV119), which is not to be considered as the final joining material for high temperature applications, but just as a model brittle joining material chosen to obtain several joined samples in a reasonable time. Advantages and disadvantages of each configuration are discussed and compared to results obtained with the same epoxy-joined carbon/carbon composites, tested by the same shear tests.     

Groebner Bases and Distance of Cyclic Codes

 Recently some methods have been proposed to find the distance of cyclic codes using Gr?bner bases. We present a similar method, whose computational cost is significantly lower. Received: April 24, 2001; revised version: February 14, 2002