Cultural ‘demons’ as future builders

Usually, the shape of the future is seen as the result of a cultural flow that, according to some privileged cultural variable, like technology, goes undisturbed towards its own outcome. This is a quite naive attitude that has been very rarely successful. Both conventional technology and technology of the artificial show that, within culture, ‘demons’ are always active trying to exploit or even bypass standards in order to give birth to unexpected novelties. This is true within the pure technology area and even more in its artistic extensions. Therefore, no deterministic process is going on but, rather, a permanent remixing of chances that makes any prophecy impossible.     

Radiant floors integrated with PCM for indoor temperature control

The control of indoor thermal comfort in buildings through thermal inertia during the summer season plays a fundamental role in the design of energy efficient buildings, especially in the Mediterranean climate. In fact, lightweight, highly insulated buildings cannot provide the necessary mass to buffer thermal gains. Phase change materials (PCM) have been used to provide lightweight building components with the required thermal inertia without increasing their overall mass. So far the integration of PCM into lightweight piped radiant floors for the control of thermal comfort during summer cooling regimes has not been investigated. This paper reports the development of a lightweight piped radiant floor prototype with an integrated PCM layer aimed at buffering internal gains at constant temperature during summer cooling regimes without affecting its winter warming capacity. Both the construction of the laboratory specimens and the development of the optimized finite element models are detailed and the assessment of the floor performance in a simulated room is discussed.     

Deployment of RSS-Based Indoor Positioning Systems

Location estimation based on Received Signal Strength (RSS) is the prevalent method in indoor positioning. For such positioning systems, a massive collection of training samples is needed for their calibration. The accuracy of these methods is directly related to the placement of the reference points and the radio map used to compute the device location. Traditionally, deploying the reference points and building the radio map require human intervention and are extremely time-consuming. In this paper we present an approach to reduce the manual calibration efforts needed to deploy an RSS-based localization system, both when using only one RF technology or when using a combination of RF technologies. It is an automatic approach both to build a radio map in a given workspace by means of a signal propagation model, and to assess the system calibration that best fits the required accuracy by using a multi-objective genetic algorithm.     

1923 Gleno Dam Break: Case Study and Numerical Modeling

On the morning of December 1, 1923, the Gleno Dam (located in the Central Italian Alps) suddenly collapsed a few days after the first complete reservoir filling. Nearly 4.5×106??m3 of water was released. The consequent inundation caused significant destruction along the downstream valley and a death toll of at least 356 lives. This failure is the only historical case of dam break caused by structural deficiencies that has occurred in Italy. As a result, it has deeply influenced the evolution of Italian regulations regarding dam design and hydraulic risk evaluation. However, in spite of its relevance, this event has never been characterized from a hydraulic standpoint. This paper reports the main information obtained from the analysis of a vast amount of historical documents regarding the Gleno Dam break to set up a case study useful for validating dam-break models in mountain settings. Moreover, it presents the main results of one-dimensional (1D) modeling of the dam break wave propagation accomplished with a first-order finite volume numerical scheme recently proposed in the literature for field applications. The overall effectiveness and reliability of the model are evaluated for this case characterized by very irregular topography. Finally, the practical relevance of several choices that the numerical reconstruction of this kind of event demands is tested.     

Er doped waveguide amplifiers written with femtosecond laser in germanate glasses

The authors report the fabrication and characterization of active waveguides in GeO₂–PbO–Ga₂O₃ glass samples doped with Er³⁺, written with a femtosecond laser delivering pulses of 150 fs duration at 1 kHz repetition rate. Permanent refractive index change was obtained and waveguides were formed under different laser pulse energies and scan velocities. The passive and active optical properties of the waveguides were investigated. The minimum value of propagation loss was of 4.8 dB/cm. Optical amplification at 1.5 μm under 980 nm excitation was observed showing a maximal internal gain of 2.7 dB/cm.     

MagIC system

In the health-care area, there is a growing demand for devices capable of monitoring cardiorespiratory function in a simple and comfortable way without interfering with the patient's behavior. Smart monitoring systems are also requested for the recording of vital signs in healthy subjects for research, assessment of performances, safety, and injury prevention purposes. Typical nonclinical areas of application include ergonomics, occupational medicine, wellness, and sport.     

FC2Q: exploiting fuzzy control in server consolidation for cloud applications with SLA constraints

Modern cloud data centers rely on server consolidation (the allocation of several virtual machines on the same physical host) to minimize their costs. Choosing the right consolidation level (how many and which virtual machines are assigned to a physical server) is a challenging problem, because contemporary multitier cloud applications must meet service level agreements in face of highly dynamic, nonstationary, and bursty workloads. In this paper, we deal with the problem of achieving the best consolidation level that can be attained without violating application service level agreements. We tackle this problem by devising fuzzy controller for consolidation and QoS (FC2Q), a resource management framework exploiting feedback fuzzy logic control, that is able to dynamically adapt the physical CPU capacity allocated to the tiers of an application in order to precisely match the needs induced by the intensity of its current workload. We implement FC2Q on a real testbed and use this implementation to demonstrate its ability of meeting the aforementioned goals by means of a thorough experimental evaluation, carried out with real‐world cloud applications and workloads. Furthermore, we compare the performance achieved by FC2Q against those attained by existing state‐of‐the‐art alternative solutions, and we show that FC2Q works better than them in all the considered experimental scenarios. Copyright © 2014 John Wiley & Sons, Ltd.     

Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB<Subscript>2</Subscript> Composites Produced by Direct Metal Laser Sintering (DMLS)

Direct metal laser sintering (DMLS) is an additive manufacturing technique for the production of parts with complex geometry and it is especially appropriate for structural applications in aircraft and automotive industries. Aluminum-based metal matrix composites (MMCs) are promising materials for these applications because they are lightweight, ductile, and have a good strength-to-weight ratio This paper presents an investigation of microstructure, hardness, and tribological properties of AlSi10Mg alloy and AlSi10Mg alloy/TiB₂ composites prepared by DMLS. MMCs were realized with two different compositions: 10% wt. of microsize TiB₂, 1% wt. of nanosize TiB₂. Wear tests were performed using a pin-on-disk apparatus on the prepared samples. Performances of AlSi10Mg samples manufactured by DMLS were also compared with the results obtained on AlSi10Mg alloy samples made by casting. It was found that the composites displayed a lower coefficient of friction (COF), but in the case of microsize TiB₂ reinforcement the wear rate was higher than with nanosize reinforcements and aluminum alloy without reinforcement. AlSi10Mg obtained by DMLS showed a higher COF than AlSi10Mg obtained by casting, but the wear rate was higher in the latter case.