Validation of temporal BRDFs of paddy fields estimated from MODIS reflectance data

The effect of the bidirectional reflectance distribution function (BRDF) is one of the most important factors in correcting and validating the reflectance obtained from remotely sensed data. While the importance of BRDF has become widely recognized, bidirectional reflectance factor (BRF) data measured for correction and validation are insufficient because of the technical difficulty of the measurement. The primary objective of the present research is to estimate BRDF effects from Moderate Resolution Imaging Spectroradiometer (MODIS) data. Temporal ground-based BRDFs of rice paddy fields were estimated from ground measurements conducted in June and August 2002. MODIS-derived BRDFs obtained from MODIS reflectance data and ground-based BRDFs were estimated using the reciprocal form of the RossThick and LiSparse (RossThick-LiSparse-R) kernels, a semiempirical BRDF model adopted for the operational MODIS BRDF product. The MODIS-derived band 1 (620-680 nm) and band 2 (841-876 nm) BRDFs were compared with the ground-based BRDFs corresponding to the same waveband, respectively. The comparison results demonstrate that BRDFs of paddy fields change in accordance with paddy growth and that MODIS-derived BRDFs are closely related to ground-based BRDFs in most of the cases. It was also revealed that MODIS-derived BRDFs can be estimated to a high degree of accuracy when MODIS data necessary for the estimation are available.     

Effect of Al concentration on pseudoelasticity in Fe3Al single crystals

Pseudoelasticity in Fe₃Al single crystals with different Al contents was investigated focusing on the dislocation configuration and the ordered domain structure. Giant pseudoelasticity only appeared in the D0₃-ordered Fe₃Al single crystals, while the B2-ordered crystals and those with the disordered phase exhibited small strain recovery. The amount of shape recovery in the D0₃-ordered crystals showed a maximum near 23.0at.%Al and decreased with increasing deviation from this Al concentration. In the D0₃ phase at 22.0–25.0at.%Al, 1/4[1 1 1] superpartial dislocations moved individually dragging the nearest-neighbour antiphase boundaries (NNAPB), while couplets of the superpartials were observed to bow out, dragging the next-nearest-neighbour antiphase boundaries (NNNAPB) in Fe–28.0at.%Al. In Fe–22.0–25.0at.%Al single crystals, the NNAPB pulled back the superpartials to decrease its energy during unloading, resulting in the giant pseudoelasticity. In contrast, the surface tension of the NNNAPB was lower than that of the NNAPB, leading to the small strain recovery in Fe–28.0at.%Al.     

A specific and rapid method for determination of adenosine 3'-monophosphate (3'-AMP) content and 3'-AMP forming enzyme activity in rat liver mitochondria, using reversed-phase HPLC with fluorescence detection

To study the physiological significance of adenosine 3'-monophosphate (3'-AMP), an intracellular P-site inhibitor of adenylate cyclase, in rat liver mitochondria, a specific, rapid and reliable assay method for determination of 3'-AMP and the activity of its forming enzyme is required. 3'-AMP in rat liver was determined to be ca. 23+/-7 nmol/g wet weight, but no 2-deoxy-3'-AMP, another P-site inhibitor of adenylate cyclase, was detected, even when using a reversed-phase HPLC column with a fluorescent-reaction, as established in this study. By using the optimized assay method developed here, 3'-AMP forming enzyme activity in rat crude mitochondrial extract was found to be enhanced by EDTA and inhibited by p-chloromercurybenzoate. The optimum pH was ca. 5.8 and no divalent cation was required for activity. From these results, 3'-AMP forming enzyme(s) in rat liver mitochondria could be classified as acid exoribonuclease, which mainly existed in an active form. The results obtained in this study will help to gain more insight into the physiological roles of 3'-AMP in living systems.     

Stationary probability density of a class of non-linear dynamical systems to stochastic excitation

The response of a dynamical system to Gaussian white-noise excitations may be represented by the Markov process whose probability density is governed by the well-known Fokker-Plank equation. In this paper a general procedure is developed to obtain the solution for Fokker-Plank equation in the state of statistical stationary. The dynamical systems considered are generally non-linear. This paper also demonstrates that the stationary joint probability density of the coordinates and velocity may possess the form of a separate product for the systems both non-linear damping and non-linear restoring forces.     

Development of a rapid assay for detecting gyrA mutations in Escherichia coli and determination of incidence of gyrA mutations in clinical strains isolated from patients with complicated urinary tract infections

The MICs of ofloxacin for 743 strains of Escherichia coli isolated from 1988 to 1994 were determined by testing. The strains were from patients with urinary tract infections complicated by functional or anatomical disorders of the urinary tract. Those determined to be ofloxacin resistant (MIC, > or =12.5 microg/ml) comprised 3 of 395 strains (1.3%) from the 1988 to 1990 group, 2 of 166 strains (1.2%) from the 1991 to 1992 group, and 7 of 182 strains (3.8%) from the 1993 to 1994 group. The incidence of resistant strains increased significantly during this period. The percentage of isolates with moderately decreased susceptibilities to ofloxacin (MIC, 0.39 to 3.13 microg/ml) also rose during the same period. To determine the incidence of gyrA mutations in urinary-tract-derived strains of E. coli, we developed a simple and rapid assay based on PCR amplification of the region of the gyrA gene containing the mutation sites followed by digestion of the PCR product with a restriction enzyme. Using this assay, we examined all 182 strains isolated in 1993 and 1994 for the presence of mutations at Ser-83 and Asp-87 in the gyrA gene. Of these strains, 33 (18.1%) had mutations in the gyrA gene. The incidences of mutations at Ser-83, at Asp-87, and at both codons were 10.4 (19 strains), 4.4 (8 strains), and 3.3% (6 strains), respectively. To determine the correlation of the mutations in the gyrA gene with susceptibilities to quinolones (nalidixic acid, ofloxacin, norfloxacin, and ciprofloxacin), we further examined 116 strains for which the MICs of ofloxacin were > or =0.2 microg/ml that were chosen from the isolates in the 1988 to 1992 group. The MICs of nalidixic acid for the strains without mutations at either Ser-83 or Asp-87 were < or =25 microg/ml, whereas those for the strains with single mutations or double mutations were from 50 to >800 microg/ml. For the fluoroquinolones, significant differences in the distributions of the MICs were observed among the strains without mutations, with single mutations, and with double mutations. The accumulation of mutations in the gyrA gene was associated with an increase in fluoroquinolone resistance. Ofloxacin MICs for the majority of the strains with single and double mutations were 0.39 to 3.13 and 6.25 to 100 microg/ml, respectively. This study demonstrates a chronological increase in the percentage of not only highly fluoroquinolone-resistant strains, corresponding to those with double mutations in the gyrA gene, but also strains with moderately decreased susceptibilities to fluoroquinolones, corresponding to those with single mutations. This increase in the incidence of strains with a single mutation in the gyrA gene portends a further increase in the incidence of strains with clinically significant resistance to fluoroquinolones.     

Effect of primary polymer chain rigidity on intramolecular cyclization and intramolecular crosslinking in free‐radical crosslinking monomethacrylate/dimethacrylate copolymerizations

d‐Bornyl methacrylate (BoMA) was chosen as a typical example of bulky monomethacrylate monomers, the polymerization of which led to the formation of a rigid polymer chain. To discuss the effect of primary polymer chain rigidity on intramolecular cyclization, we compared the solution copolymerization results of BoMA with 1 mol % ethylene dimethacrylate (EDMA; n = 1) and poly(ethylene glycol dimethacrylate) [CH₂?C(CH₃)CO(OCH₂CH₂)_nOCOC(CH₃)?CH₂, n = 9 (PEGDMA‐9)] with those of methyl methacrylate (MMA) with 1 mol % EDMA and PEGDMA‐9; the dependence of the weight‐average degree of polymerization on conversion for the former BoMA copolymerization systems was completely opposed to that for the latter MMA systems, and this was a reflection of a reduced occurrence of intramolecular cyclization caused by the rigidity of the primary polymer chain. The effect of primary polymer chain rigidity on intramolecular crosslinking was discussed through a comparison of both BoMA/EDMA and MMA/EDMA copolymerizations. The correlations of the intrinsic viscosity, root‐mean‐square (rms) radius of gyration, and second virial coefficient with the molecular weight were examined for both BoMA/EDMA (90/10) and MMA/EDMA (90/10) copolymerizations in a dilute solution because microgelation was observed in solution MMA/EDMA (90/10) copolymerization as a reflection of a locally extensive occurrence of intramolecular crosslinking. The logarithmic plots of both the intrinsic viscosity and rms radius of gyration versus the molecular weight for MMA/EDMA copolymerization were compared with those for the corresponding BoMA/EDMA copolymerizations. The second virial coefficients were greater than 10^?5 mol cm³ g^?2 for BoMA/EDMA copolymers, even when the conversion was very close to the gel point, whereas they were quite low, that is, less than 10^?5 mol cm³ g^?2, for an MMA/EDMA copolymer obtained at more than 15% conversion. These were ascribed to a suppressed occurrence of intramolecular crosslinking, a reflection of the lessened flexibility of the polymer main chain and a steric effect due to the bulky d‐bornyl groups. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1086–1093, 2004     

Growth of thick CdTe epilayers on GaAs substrates and evaluation of CdTe/n<Superscript>+</Superscript>-GaAs heterojunction diodes for an X-ray imaging detector

The growth characteristics of thick (100) CdTe epitaxial layers of a thickness up to 200 μm on a (100) GaAs substrate in a metal-organic vapor-phase epitaxy (MOVPE) system and fabrication of CdTe/n⁺-GaAs heterojunction diodes for their possible applications in low-energy x-ray imaging detectors are reported. The grown epilayers were of high structural quality as revealed from the x-ray double-crystal rocking curve (DCRC) analysis, where the full-width at half-maximum (FWHM) values of the (400) diffraction peaks was between 50 arcsec and 70 arcsec. The 4.2-K photoluminescence (PL) showed high-intensity bound-excitonic emission and very small defect-related peaks. The heterojunction diode fabricated had a good rectification property with a low value of reverse-bias current. The x-ray detection capability of the diode was examined by the time-of-flight (TOF) measurement, where good bias-dependent photoresponse was observed, but no carrier transport property could be deduced. It was found that the CdTe layer has a large number of trapping states as attributed to the cadmium-related vacancy and Ga-impurity, diffused from the substrate, related defect complexes.     

Preparation of fine polymer particles containing metallocene derivatives

This article deals with preparations of fine particles of metallocene copolymers by emulsifierfree emulsion polymerization of vinylferrocene (VFc), ferrocenylmethyl methacrylate (FMMA), 1-ferrocenylethyl methacrylate (1-FEMA), 2-ferrocenylethyl methacrylate (2-FEMA), and 1-ruthenocenylethyl methacrylate (1-REMA) with acrylonitrile (AN), styrene (St), and methyl methacrylate (MMA) in water/ethanol medium. As a result, spherical copolymer particles containing metallocene derivatives have been successfully synthesized in the particle size of ca. 120 to 600 nm. The contents of ferrocenyl or ruthenocenyl groups in copolymer particles increased with increasing concentration of charged metallocene derivatives, while the amounts of metallocene derivatives incorporated into particles are much lower than the charged ratio. © 1994 John Wiley & Sons, Inc.     

An efficient algorithm for optimal generation mix taking into account fuzziness of decision making and planning parameters

This paper presents an efficient computational algorithm for selecting the optimal generation mix under uncertain circumstances. Subjective, experiential or linguistic uncertainties are selected from among various uncertainties, i.e., we treat fuzziness in generation expansion planning. The fuzziness can be divided into: (1) the fuzziness of decision making; and (2) the fuzziness of some planning parameters, such as load growth, fuel price, and so on. Both classes of fuzziness are integrated into a fuzzy decision based on fuzzy sets theory, and then the optimal generation mix can be determined by the Fuzzy Dynamic Programming (FDP) technique. The proposed method, which is based on the dynamic programming technique, is extended by using the Bellman-Zadeh maximizing decision. In the method, each generation technology and generation capacity are selected as a stage and state, respectively. The proposed method can easily accommodate not only the fuzziness but also many constraints of generation expansion planning, such as integer solutions of unit capacities, condition of existing units, and so on. Furthermore, the arbitrary shape of membership function can be used. The effectiveness and feasibility of the proposed method are demonstrated on a typical power system model.