Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Reactive energy measurement using frequency controlled analog-to-pulse-rate converter

Contents This paper analyzes a problem of phase shifting and deseribes a novel method for electronic reactive energy measurement. The proposed measurement structure, composed of an integrator as a phase shifting circuit and a frequency controlled analog-to-pulse-rate converter, provides for the measurement completely in accordance with IEC definition of reactive energy, which is performed with simple but high performance metering device.

---

Die Blindverbrauchsmessung anhand eines netzsynchronisierten Analog-Frequenz-Wandlers

Übersicht In diesem Artikel wird das Problem der Phasenverschiebung analysiert und eine neue Meßmethode für elektronische Blindverbrauschsmessung aufgezeigt. Die vorgeschlagene Strucktur, bestehend aus einem Integrator als Phasenschieber und netzkontrolliertem Analog-Frequenz-Wandler, ermöglicht die Verwirklichung eines einfachen aber präzisen Elektrizitätszählers zur Messung der Blindenergie, dessen Arbeitsprinzip mit den IEC Empfehlungen vollkommen übereinstimmt.

     

Phase transformation and densification during pressureless sintering of Si3N4 with MgO and Y3Al5O12 additives

The - transformation of Si₃N₄ during liquid-phase sintering appears to be controlled by the growth of the -Si₃N₄ grains in the direction perpendicular to thec-axis in the case of MgO additive. The diffusion through the liquid is the rate-controlling step in the case of the Y₄Al₅O₁₂ additive. The density of the sintered body at the solid skeleton stage was influenced by the change in the - transformation rate and/or by a change of the transformation mechanism. The indirect proportionality between the -phase content in the starting powder and the density at the solid skeleton stage was found. The microstructure of the sintered body is influenced by both the -phase content in the starting powder and the chemical composition of the additive. Fine, uniform microstructure with a high aspect ratio of -grains is obtained, when the -phase content in the starting powder is as small as possible and when the - transformation is controlled by grain growth.     

Observation of higher order NMR larmor lines by SQUID in solids at low magnetic field

We describe an apparatus allowing the observation of the NMR static longitudinal component of nuclear magnetizationM _z by a SQUID at low magnetic fields and atT=4.2 K in Plexiglas, Teflon, and CaF₂. The higher order NMR Larmor lines at 2f ₀, 3f ₀, and 4f ₀, wheref ₀ is the Larmor frequency of the allowed NMR line, were measured. These lines correspond to a flip of two, three, and four spins, respectively, by one photon. The amplitudes of 2f ₀ and 3f ₀ lines and their field dependences show that the common assertion that the forbidden lines at 2f ₀ and 3f ₀ appear in the same order of perturbation theory and that their intensity decreases with static magnetic fieldB ₀ asB ₀ ^–2 is wrong. In fact, the third Larmor line 3f ₀ appears at higher order than the second Larmor line 2f ₀ and its intensity decreases asB ₀ ^–4 . This is also shown by a theoretical calculation of its intensity. For the first time the NMR SQUID technique allowed the detection of the 4f ₀ line, corresponding to the simultaneous flip of four spins by one photon.     

Modal logic as metalogic

The goal of this paper is to show how modal logic may be conceived as recording the derived rules of a logical system in the system itself. This conception of modal logic was propounded by Dana Scott in the early seventies. Here, similar ideas are pursued in a context less classical than Scott's.First a family of propositional logical systems is considered, which is obtained by gradually adding structural rules to a variant of the nonassociative Lambek calculus. In this family one finds systems that correspond to the associative Lambek calculus, linear logic, relevant logics, BCK logic and intuitionistic logic. Above these basic systems, sequent systems parallel to the basic systems are constructed, which formalize various notions of derived rules for the basic systems. The deduction theorem is provable for the basic systems if, and only if, they are at least as strong as systems corresponding to linear logic, or BCK logic, depending on the language, and their deductive metalogic is not stronger than they are.However, though we do not always have the deduction theorem, we may always obtain a modal analogue of the deduction theorem for conservative modal extensions of the basic systems. Modal postulates which are necessary and sufficient for that are postulates of S4 plus modal postulates which mimic structural rules. For example, the modal postulates which Girard has recently considered in linear logic are necessary and sufficient for the modal analogue of the deduction theorem.All this may lead towards results about functional completeness in categories. When functional completeness, which is analogous to the deduction theorem, fails, we may perhaps envisage a modal analogue of functional completeness in a modal category, of which our original category is a full subcategory.     

Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part II: An electrochemical quartz crystal microbalance study

Electropolymerization of phenol and mono-, di-, tri-, pentachlorophenols was studied using EQCM on a Pt electrode at 0.78 V (SHE) in 1 M NaOH solution containing 0.1 M of the corresponding phenol. The highest electropolymerization rate was found for ortho-substituted chlorophenols indicating a weak fouling of the electrode. Low electropolymerization rates for para-substituted chlorophenols suggest a low permeability of the polymer film, resulting in rapid electrode fouling. The EQCM data suggest that electropolymerization of chlorophenols occurs without Cl-elimination for the monomers with unsubstituted ortho and para positions. Dechlorination is most pronounced for electropolymerization of para-substituted isomers. The mechanism of electropolymerization of chlorophenols is discussed.     

Nature-Inspired Meta-Heuristics on Modern GPUs: State of the Art and Brief Survey of Selected Algorithms

Graphic processing units (GPUs) emerged recently as an exciting new hardware environment for a truly parallel implementation and execution of Nature and Bio-inspired Algorithms with excellent price-to-power ratio. In contrast to common multicore CPUs that contain up to tens of independent cores, the GPUs represent a massively parallel single-instruction multiple-data devices that can nowadays reach peak performance of hundreds and thousands of giga floating-point operations per second. Nature and Bio-inspired Algorithms implement parallel optimization strategies in which a single candidate solution, a group of candidate solutions (population), or multiple populations seek for optimal solution or set of solutions of given problem. Genetic algorithms (GA) constitute a family of traditional and very well-known nature-inspired populational meta-heuristic algorithms that have proved its usefulness on a plethora of tasks through the years. Differential evolution (DE) is another efficient populational meta-heuristic algorithm for real-parameter optimization. Particle swarm optimization (PSO) can be seen as nature-inspired multiagent method in which the interaction of simple independent agents yields intelligent collective behavior. Simulated annealing (SA) is global optimization algorithm which combines statistical mechanics and combinatorial optimization with inspiration in metallurgy. This survey provides a brief overview of the latest state-of-the-art research on the design, implementation, and applications of parallel GA, DE, PSO, and SA-based methods on the GPUs.     

Towards a Trajectory Planning Concept: Augmenting Path Planning Methods by Considering Speed Limit Constraints

Trajectory planning is an essential part of systems controlling autonomous entities such as vehicles or robots. It requires not only finding spatial curves but also that dynamic properties of the vehicles (such as speed limits for certain maneuvers) must be followed. In this paper, we present an approach for augmenting existing path planning methods to support basic dynamic constraints, concretely speed limit constraints. We apply this approach to the well known A* and state-of-the-art Theta* and Lazy Theta* path planning algorithms. We use a concept of trajectory planning based on a modular architecture in which spatial and dynamic parts can be easily implemented. This concept allows dynamic aspects to be processed during planning. Existing systems based on a similar concept usually add dynamics (velocity) into spatial curves in a post-processing step which might be inappropriate when the curves do not follow the dynamics. Many existing trajectory planning approaches, especially in mobile robotics, encode dynamic aspects directly in the representation (e.g. in the form of regular lattices) which requires a precise knowledge of the environmental and dynamic properties of particular autonomous entities making designing and implementing such trajectory planning approaches quite difficult. The concept of trajectory planning we implemented might not be as precise but the modular architecture makes the design and implementation easier because we can use (modified) well known path planning methods and define models of dynamics of autonomous entities separately. This seems to be appropriate for simulations used in feasibility studies for some complex autonomous systems or in computer games etc. Our basic implementation of the augmented A*, Theta* and Lazy Theta* algorithms is also experimentally evaluated. We compare (i) the augmented and basic A*, Theta* and Lazy Theta* algorithms and (ii) optimizing of augmented Theta* and Lazy Theta* for distance (the trajectory length) and duration (time needed to move through the trajectory).