Recurrence formulas for fast creation of synthetic three-dimensional holograms

A method for accelerating the synthesis of computer-generated three-dimensional (3-D) holograms, based on conventional ray tracing, is proposed. In ray tracing, computers expend almost all of their resources in calculating the 3-D distances between each one of the point sources composing an object and a sampling point on the hologram. We present recurrence formulas that precisely compute the distances and reduce the computation time for synthesizing holograms to one half to one quarter, depending on the processor type. We demonstrate that a full-parallax hologram with an area of 4800 x 4800 pixels, synthesized for a 3-D object containing 966 point sources of light, is computed within 17 min and is optically reconstructed.     

Analysis of Organisation-Committed Human Error by Extended CREAM

This report analyses the results of the human error classification scheme of CREAM applied to organisation-committed human errors related to six departments. These human errors were not caused by the tasks spotlighted by CREAM, but were concentrated on managerial or administrative tasks, so that the authors have corrected and analysed the definitions and links of cause–effect relations related to the large organisation by means of an extended method of CREAM. Considering human errors on the basis of these analyses, findings have allowed the authors to come up with effective relations between organisation-related causal factors and person-related ones. This has demonstrated that organisation-caused human errors are sufficiently analysable by means of the extended method of CREAM.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Novel hepatitis C virus protease inhibitors: thiazolidine derivatives

This study evaluated the inhibitory effects of thiazolidine derivatives on hepatitis C virus (HCV) protease and other human serine proteases. The inhibition efficacy was tested with a reversed-phase high-performance liquid chromatography (HPLC) assay system using a NS3-NS4A fusion protein as the HCV protease and a synthetic peptide substrate that mimics the NS5A-5B junction. Nine thiazolidine derivatives showed more than 50% inhibition at 50 microg/ml. The most potent derivative was RD4-6250, with 50% inhibition at a concentration of 2.3 microg/ml; this concentration was lower than those of other protease inhibitors reported previously. The most selective derivative was RD4-6205, with 50% inhibition at a concentration of 6.4 microg/ml, a lower concentration than those on other serine proteases (chymotrypsin, trypsin, plasmin, and elastase). These results suggest that the RD4-6205 skeleton is an important structure for inhibitory activity on the HCV protease NS3-NS4A.     

Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer

We demonstrated that the stability of organic solar cells (OSCs) under light irradiation is markedly enhanced by inserting a molybdenum trioxide (MoO₃) buffer layer between an anode layer of indium tin oxide (ITO) and a p-type layer of 5,10,15,20-tetraphenylporphyrin (H₂TPP) or N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (α-NPD). The use of the MoO₃ layer also enhanced open-circuit voltages and power conversion efficiencies of the OSCs due to an increase in built-in potential. From results of stability test of hole-only α-NPD devices, we concluded that the OSC degradation occurs near the ITO/p-type layer interface and that the use of the MoO₃ layer can prevent the degradation at this interface.     

Optical and electronic properties of cobalt-doped zinc oxide films prepared by the sputtering method

In-doped ZnO, Co-doped ZnO and Li-doped NiO are successively deposited on quartz by the sputtering method. A current versus voltage curve of the three-layer device, in which the Indoped ZnO and Li-doped NiO are used as electrodes, reveals that the In-doped ZnO is an ohmic electrode and the Li-doped NiO is a blocking electrode with respect to electron injection. In photocurrent spectra of the three-layer device, there are two distinct peaks around 410 and 640 nm. The former is ascribed to the photoionization caused by the electric-dipole transition from the ground states,⁴A₂(F), to the conduction band, and the latter to the thermal emission from electronic excited states of Co²⁺,⁴T₁(P).     

Water electrolysis under microgravity: Part 1. Experimental technique

Water electrolysis was conducted in both alkaline (25 wt.% KOH, 2 wt.% KOH) and acid (0.1N H₂SO₄) solutions for 8 s under microgravity environment realized in a drop shaft. The gas bubble formation of hydrogen and oxygen on platinum electrodes was observed by CCD camera. In alkaline solutions, a bubble froth layer grew on the electrode surface. Hydrogen bubble size was smaller than that of oxygen. The current density at constant potential decreased continually with time. In spite of the growth of a bubble froth layer on the electrode, the electrolysis never stopped, apparently because fresh electrolyte is supplied to the electrode surface by microconvection induced by the gas bubble evolution. In acid solution, hydrogen gas bubbles frequently coalesced on the cathode surface, yielding a larger average bubble than that of oxygen. The current density did not vary at constant potentials from –0.4 to −0.8 V versus reversible hydrogen electrode (RHE), because the effective electrode surface area was significantly reduced by the larger bubble size compared to alkaline electrolyte. The present experiments indicate that, especially in a microgravity environment, the bubble evolution behavior and the resultant current–potential curves are significantly influenced by the wettability of the electrode in contact with the electrolyte.     

Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CT with digital image correlation

In this paper, localized deformation in partially saturated sand was investigated quantitatively using microfocus X-ray computed tomography (CT) and an image analysis of the CT images. Triaxial compression tests on a partially saturated dense Toyoura sand specimen were carried out under a low confining pressure and under drained conditions for both air and water. The development of localized deformation was observed macroscopically using microfocus X-ray CT, and the displacement field over the entire specimen was quantified by an image analysis of the CT images with the digital image correlation (DIC) technique. The progressive development of shear bands is discussed with reference to these images. In addition, the region of localization was observed microscopically by partial CT scanning on a micron scale with high spatial resolution. Changes in the particulate structures are also discussed herein. The DIC image analysis of the partial CT images provided a microscopic displacement field and indicated that very fine localized shear deformation developed before the shear bands had become visible in the macroscopic investigation.