Effect of ZnO layer thickness upon optoelectrical properties of NiO/ ZnO heterojunction prepared at room temperature

In this work, p-NiO/n-ZnO heterostructures were successfully prepared at room temperature using RF sputtering technique. The influence of ZnO layer thickness on the performance of the heterojunction was investigated. The deposited ZnO layers have a hexagonal Wurtzite structure with preferable growth orientations along (002) and (103) for thinner films. Increasing the thickness results in more crystallographic orientation randomness. The current–voltage measurements of the realized heterojunctions showed a clear rectifying behavior. The measured ideality factor varies from 2.5 to 1.6 according to the thickness of ZnO layer. The series resistance of the device is enlarged with increasing ZnO thickness. The deduced parameters from the I–V characteristics suggest that 200 nm is the optimal thickness of the ZnO layer according to our experimental conditions. We attribute the relatively better performance of this thickness to achieving reasonable compensation between serial resistance and ideality factor. The best heterojunction was tested and successfully used as a UV detector.     

Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

On Application of Carbon-Containing Electrode Materials in Technology of Electrospark Alloying: Part 1. Peculiarities of Coating Formation Using Electrospark Treatment of Titanium Alloy OT4-1

Electrospark treatment of OT4-1 titanium alloy was performed sequentially with a STIM-20N hard-alloy electrode (TiC–20% Ni) and carbon-containing material (graphite and carbon-based composite materials). Kinetics of the mass transfer of the hard-alloy electrode was studied. The cathode mass loss during the first minute of the treatment was established. The kinetics results were processed using the methods of mathematical statistics. The erosion resistance of the applied carbon-containing materials was determined. Phase composition and relief of the coatings formed were analyzed. It was found that the application of the carbon-containing material increases the content of refractory phases in the coatings. Increase in the time of the treatment using the carbon-containing materials decreases the roughness of the coatings.     

Medicine Meets Thermal Spray Technology: A Review of Patents

The patent literature concerning thermal spraying for biomedical applications is reviewed in this contribution. The patents were compiled from multiple databases search spanning the 2005-2018 period. For clarity and ease of reading, the results have been grouped into sections according to four individual material groups (apatites, titanium, oxide ceramics, other), with the secondary sorting criterion being related to the specific bioapplication areas (maxillofacial, orthopedic, methods). Lastly, the patents are grouped according to the selected thermal spray method within the individual subsections. In the paper, recent R&D trends in this field are further identified and briefly commented.     

Assessment of Dam Overtopping Reliability using SUFI Based Overtopping Threshold Curve

Estimation of earth-fill dam height and dimension of spillway are strongly depend on accurate evaluation of dam overtopping reliability. Ideally, whole random and effective variables on overtopping should be considered for dam overtopping reliability assessment. However, taking into account all affecting random variables as well as overtopping reliability assessment using algorithms such as Monte Carlo (MC) could be excessively time consuming and impossible in some cases. In this study, new approach has been introduced as conditional reliability method and it has been tried to reduce the simulations time significantly by using combination of rainfall threshold theory, SUFI (Sequential Uncertainty Fitting) and MC methods. According two defined indexes, the obtain results shown, the relative error of new approach in computation of Jamishan dam overtopping reliability is less than 0.23%. Also, time saving in new method against to regular MC method is more than 87%. So, the new introduced method has more efficiency with acceptable accuracy for assessment of dam overtopping reliability. In addition, among hydrological and hydraulic uncertainties, hydrological uncertainties have more effect on overtopping reliability.     

Reoptimization framework and policy analysis for maritime inventory routing under uncertainty

We study a maritime inventory routing problem, in which shipments between production and consumption nodes are carried out by a fleet of vessels. The vessels have specific capacities and can be chartered under different agreements. The inventory levels of all consumption nodes and some production nodes should be maintained within specified bounds; for the remaining production nodes, orders should be picked up within pre-defined time windows. We propose a discrete-time mixed-integer programming model. In the face of new information and uncertainty, this optimization model has to be re-solved, as the horizon is rolled forward. We discuss how to account for different sources of uncertainty. We present a rolling-horizon reoptimization framework that allows us to study different policies that impact the quality of the implemented solution, so we can identify the optimal set of policies.     

A Constitutive Equation of Thermoelasticity for Solid Materials

A new constitutive equation of thermoelasticity for crystals is presented based on the interatomic potential and solid mechanics at finite temperature. Using the new constitutive equation, the calculations for crystal copper and graphene are carried out under different loading paths at different temperatures. The calculated results are in good agreement with those of the previous thermoelasticity constitutive equation based on quantum mechanics, which clearly indicates that our new constitutive equation of thermoelasticity is correct. A lot of comparisons also show that the present theory is more concise and efficient than the previous thermal stress theory in the practical application.     

Calcium phosphates grown on bacterial cellulose template

Bacterial cellulose membranes were employed as templates for calcium phosphates deposition by successive immersion in solutions of Ca(NO₃)₂·4H₂O and (NH₄)₂HPO₄, under ultrasonication. During the wet chemical reaction, mineral phases were loaded on bacterial cellulose fibrils, leading to precursor hybrid composites. These were subjected to a lyophilisation procedure in order to preserve the 3D porous aspect and afterwards to a thermal treatment with the aim of removing the polymeric phase and generating well crystallized structures. Different types of morphologies were achieved by varying the heating rate, as well as the calcination temperature and period. The as-prepared samples and the final ones were investigated from compositional and structural point of view through X-ray diffraction and Fourier-transform infrared spectroscopy and morphologically concerning by scanning electron microscopy. The magnetic properties were also evaluated in order to demonstrate the suitability of the obtained materials for the development of magnetic scaffolds dedicated to hard tissue applications.