Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

Temperature Dependence of the Hall and Longitudinal Resistances in a Quantum Hall Resistance Standard

We present detailed measurements of the temperature dependence of the Hall and longitudinal resistances on a quantum Hall device [(GaAs(7)] which has been used as a resistance standard at NIST. We find a simple power law relationship between the change in Hall resistance and the longitudinal resistance as the temperature is varied between 1.4 K and 36 K. This power law holds over seven orders of magnitude change in the Hall resistance. We fit the temperature dependence above about 4 K to thermal activation, and extract the energy gap and the effective g-factor.     

Use of a non-rigid region in T4 lysozyme to design an adaptable metal-binding site

It is not easy to find candidate sites within a given proteinwhere the geometry of the polypeptide chain matches that ofmetal-binding sites in known protein structures. By choosinga location in T4 lysozyme that is inherently flexible, it waspossible to engineer a two-histidine site that binds differentdivalent cations. Crystallographic analysis shows that the geometryof binding of zinc is distorted tetrahedral while that of cobaltand nickel is octahedral. Insofar as spectroscopic data canbe measured, they indicate that similar modes of coordinationare retained in solution. The two substitutions, Thr21     

Having It Both Ways: Distinguishable Yet Phase-Coherent Mixtures of Bose-Einstein Condensates

We have begun a series of experiments on mixed bosonic quantum fluids. Our system is mixed Bose-Einstein condensates in dilute Rb-87. By simultaneously trapping the atoms in two different hyperfine states, we are able to study the dynamics of component separation and of the relative quantum phase of two interpenetrating condensates. Population can be converted from one state to the other at a rate that is sensitive to the relative quantum phase.     

Process cycle optimization in press forming of paperboard

Three‐dimensional forming of paperboard is commonly done by a press forming process, which has been widely researched. However, the process cycle of the press forming of paperboard trays has not yet been completely optimized due to limited adjustability and unsophisticated mechanical structure of commonly used forming equipment. The object of this study is to optimize the force curve of stroke to improve product quality without compromising the production rate using LUT Adjustable Packaging Line prototype for practical evaluation of formability and multibody dynamics software MSC Adams for simulation. Several process parameters were investigated with different process cycles to study their effect on the quality of the formed products. With optimized male mould speed, acceleration and speed of the blank could be reduced, which led to significantly reduced rupturing tendency without compromising the production speed. It was also found that a constant blank holding force should be used to achieve acceptable tray quality, although this results in a significantly increased surface pressure applied to the formed substrate. It was also discovered that a novel male mould attachment, which included a pressing force adjustment system that utilized a spring set with an adjustable preload, made it possible to control the force distribution between different forming tools during the dwelling phase of the process cycle in an improved way. Utilization of the method used in this paper leads to a better tray quality without compromising the production efficiency. Furthermore, this can increase the number of possible package applications for sustainable materials, such as paperboard.