Graded replacement of corn grain with molassed sugar beet pulp modulates the fecal microbial community and hindgut fermentation profile in lactating dairy cows

High starch lactation diets not only enhance the risk of subacute ruminal acidosis but also of hindgut acidosis, which increases the risk of dysbiosis and the depression of fiber degradation. We recently showed that replacing corn with molassed sugar beet pulp (Bp) improved fiber degradation in high-producing dairy cattle, possibly because of an improvement of rumen and hindgut conditions for microbes by Bp feeding. However, little is known about the effects of high inclusion rates of Bp on hindgut microbes and fermentation. Thus fecal grab samples were taken from 18 high-yielding Simmental cows after 28 d of feeding 3 different levels of Bp (n = 6) for bacterial 16S rRNA amplicon sequencing. In addition, the reticular pH was continuously monitored with indwelling sensors and eating and ruminating behavior was evaluated with noseband sensors. The Bp inclusion rates were 0 g/kg (i.e., no Bp inclusion as control, CON), 120 g/kg (12Bp), or 240 g/kg (24Bp) replacing corn grain and limestone on a dry matter basis. The amount of time spent eating and ruminating was unaffected by Bp level, and the daily fluctuation in the reticular pH was reduced by 25% with Bp inclusion from 0.8 in the CON diet to 0.6 in 24Bp fed animals. Also, the fecal pH tended to increase with dietary Bp inclusion. Fecal acetate production showed a quadratic tendency with the lowest concentration (58.9%) of the total short-chain fatty acid in the 12Bp treatment. Inclusion of Bp up to 24% of the diet decreased the fecal butyrate proportion by 27%. The Shannon diversity index was increased from 5.50 to 8.09 with dietary Bp inclusion indicating increased species diversity. Of the 200 most abundant operational taxonomic units, 25 were increased by dietary Bp inclusion, whereas 15 were decreased and 7 were quadratically affected. The second most abundant group was proposed taxon “CF231” of the family Paraprevotellaceae. Although it accounted for only 2.52% of the operational taxonomic units in the CON diet, it was increased by 64% with dietary Bp inclusion. The largest relative change in the abundance was found for the genus Fibrobacter that increased more than 14-fold from 0.04% (CON) to 0.66% (24Bp). In conclusion, feeding molassed sugar beet pulp as partial substitution of corn up to 240 g/kg is a viable alternative that promotes ruminal and hindgut fermentation by supporting physiological pH and bacterial diversity.     

Optimal conditions for mycelial growth of Schizosaccharomyces japonicus cells in liquid medium: it enables the molecular investigation of dimorphism

The non‐pathogenic dimorphic fission yeast, Schizosaccharomyces japonicus, could be a suitable model organism for investigation of the genetic background of mycelial growth, as it has a haploid chromosome set and its genome is sequenced. Since earlier results have suggested that its morphological transition required solid substrates, but molecular biological experiments would require hyphae production in a liquid medium, we wanted to find circumstances which would enable hyphae production in liquid media. Several external conditions were investigated, but the strongest inducer was fetal bovine serum (FBS). Its positive effect could be hampered by heat and was dependent on pH, temperature and concentration of the serum. Other protein‐containing compounds, such as peptone and bovine serum albumin or amino acids, proved to be ineffective or weak. Generally, the uninduced and induced mycelial growth of Sz. japonicus could be improved by lower external pH and higher temperature. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of life-cycle cost disclosure on consumer behavior: evidence from a field experiment with cooling appliances

Theory suggests that providing consumers with an estimated life-cycle cost (LCC) may make them buy more energy-efficient household appliances in cases where energy efficiency is cost effective. This article evaluates the link between the provision of LCC and consumer behavior by using an online field experiment for cooling appliances. Internet users arriving at a commercially operating price comparison website were randomly assigned to two experimental groups, and the groups were exposed to different visual stimuli. The control group received regular product price information, whereas the treatment group was offered additional information about estimated operating cost and total LCC. Consumers’ click behavior was evaluated with multiple regression controlling for several product characteristics (n = 1,969 clicks). We find that LCC disclosure reduces the mean specific energy use of chosen cooling appliances by 2.5% (p < 0.01), making it a potentially interesting approach for environmental policy regarding the market transformation toward more energy-efficient household appliances. However, LCC disclosure also decreases the number of clicks from the price comparison website to final retailers by about 23% (p < 0.01), which makes it—in the format chosen here—undesirable from a business perspective. Therefore, future research should clarify under what (if any) conditions can monetary energy cost disclosure be associated with more positive effects for price comparison websites.     

Prediction of autoignition in a lifted methane/air flame using an unsteady flamelet/progress variable model

An unsteady flamelet/progress variable (UFPV) model has been developed for the prediction of autoignition in turbulent lifted flames. The model is a consistent extension to the steady flamelet/progress variable (SFPV) approach, and employs an unsteady flamelet formulation to describe the transient evolution of all thermochemical quantities during the flame ignition process. In this UFPV model, all thermochemical quantities are parameterized by mixture fraction, reaction progress parameter, and stoichiometric scalar dissipation rate, eliminating the explicit dependence on a flamelet time scale. An a priori study is performed to analyze critical modeling assumptions that are associated with the population of the flamelet state space.For application to LES, the UFPV model is combined with a presumed PDF closure to account for subgrid contributions of mixture fraction and reaction progress variable. The model was applied in LES of a lifted methane/air flame. Additional calculations were performed to quantify the interaction between turbulence and chemistry a posteriori. Simulation results obtained from these calculations are compared with experimental data. Compared to the SFPV results, the unsteady flamelet/progress variable model captures the autoignition process, and good agreement with measurements is obtained for mixture fraction, temperature, and species mass fractions. From the analysis of scatter data and mixture fraction-conditional results it is shown that the turbulence/chemistry interaction delays the ignition process towards lower values of scalar dissipation rate, and a significantly larger region in the flamelet state space is occupied during the ignition process.     

Experiment-driven electrochemical modeling and systematic parameterization for a lithium-ion battery cell

This paper presents a novel electrochemical lithium-ion cell model which can be used in battery control units. Based on classical single-particle approaches, a lumped-parameter nonlinear model is developed that is able to predict accurately the terminal voltages for arbitrary loads, and even for potentiostatic operation. The key points are: (1) an incorporation of the electrolyte potential, (2) a modal decomposition of the partial differential equation of the liquid phase lithium-ion concentration, (3) a correct handling of the SOC-dependent diffusivity in the insertion materials of both electrodes, and (4) a consideration of temperature-dependent kinetic processes. A combined parameter analysis and identification is successfully applied for the parameterization of the model. Using a Fisher-information matrix approach in combination with a sensitivity analysis, the identifiability of each parameter is estimated in dependence on the measurement information. Using this information, it is possible to choose a small number of relevant experiments which are sufficient to fully parameterize the model.     

Pathways to a hydrogen fuel infrastructure in Norway

Hydrogen is expected to become an integral part of the Norwegian energy system in the future, primarily as transportation fuel. The NorWays project aims at providing decision support for introduction of hydrogen in the Norwegian energy system by modelling of energy system and hydrogen infrastructure at various spatial levels. GIS-based regional hydrogen demand scenarios and fuelling station networks have been generated, considering organic growth of regional hydrogen coverage and increasing density of hydrogen users over time. A regional model optimised supply scenarios for these fuelling station networks, including choice of production technology (biomass gasification, NG SMR, electrolysis, by-product hydrogen) and delivery (pipeline, truck, and onsite schemes), including integrated hydrogen delivery networks by truck and pipeline. The impact of energy price and GHG emission constraint scenarios on hydrogen production and delivery mix and average hydrogen costs is analysed, and conclusions on the effectiveness of policy measures are drawn.     

Potential of photovoltaic systems in countries with high solar irradiation

Renewable energy sources derived principally from solar energy have been gaining ground over the last few years and are now beginning to contribute to the global energy mix. Solar energy in the form of direct electricity conversion (photovoltaics) is already very popular in countries such as the United States, Germany and Japan. The enormous potential of photovoltaic (PV) technology is also obvious and favourable in countries with high irradiation such as the Mediterranean region. The objective of this paper is to review the different up and coming PV technologies, to explore the potential of different PV systems in countries with high solar irradiation and to compare their performance through the assessment of thirteen different types of PV systems that have been installed side by side in Nicosia, Cyprus and Stuttgart, Germany. Finally useful insight into the performance of the PV systems as a function of the meteorological conditions and location will be highlighted.     

Detection of 4-aminocarminic acid in beverages and cake glaze from the German market: a food additive not approved in the EU

In the European Union, carminic acid and its ammonium, calcium, potassium or sodium salts and its aluminium lakes are approved as food additive E120. In beverages obtained from the German market 4-aminocarminic acid (“acid-stable carmine”) was detected by HPLC–PDA and LC–MS/MS. Isolation of the colorant from a liquid dye preparation used for the production of a beverage sample and subsequent NMR analysis confirmed the presence of 4-aminocarminic acid. Synthesis of ¹⁵N-4-aminocarminic acid clearly demonstrated that “acid-stable carmine” is not the ammonium salt of carminic acid, which is approved as food additive in the European Union. In fact, nitrogen in “acid-stable carmine” is covalently bound. The molecular structure of carminic acid is chemically modified and 4-aminocarminic acid does not comply with the specifications laid down for E120 in Commission Regulation (EU) No 231/2012. 4-Aminocarminic acid was also detected in the red-colored glaze of a raspberry cake and in the liquid dye preparation used for coloring this glaze.     

The Use of Response Surface Methodology to Optimise Malting Conditions of Proso Millet (Panicum miliaceum L.) as a Raw Material for Gluten‐Free Foods

Response surface methodology was used to investigate the influence of the three malting parameters, i.e. degree of steeping, germination time, and temperature on the quality of proso millet malt. Each predictor variable was tested at three levels. Germination times varied from 5, 6, and 7 days, degrees of steeping were 44, 48, and 52%, and germination temperatures were 16, 20, and 24°C. A set kilning temperature of 65°C was used for all malts. A series of malt quality parameters were investigated including extract, apparent attenuation limit, gelatinisation temperature, α‐amylase activity, β‐amylase activity, limit dextrinase activity, Kolbach index, α‐amino nitrogen, viscosity, and colour. The optimal malting program was achieved after the fifth day of germination, 44% degree of steeping, and a 22°C steeping and germination temperature. The obtained values for the amylolytic and cytolytic attributes were 64.8% extract, 1.383 mPa × s viscosity, 76.0% apparent attenuation limit, 111 U/g α‐amylase activity, and 102 U/g β‐amylase activity.     

Occurrence of stable foam in the upper Rhine River caused by plant-derived surfactants

For 30 yr, a persistent foam cover has been observed during the summer months in the Rhine River beneath the Rhine Fall, a waterfall near Schaffhausen, Switzerland. This phenomenon has been a matter of public concern ever since its first appearance, but all previous attempts to clarify the origin of this foam had remained inconclusive. With the aid of electrospray LC-MS,triterpene saponins and mono- and digalactosyldiacylglycerolipids (MGDAG and DGDAG), two classes of tensioactive metabolites occurring in the aquatic plant Ranunculus fluitans Lamk. (Ranunculaceae), were detected in river water and foam samples. Saponin concentrations in water and foam samples were monitored at regular intervals during the years 1998 and 2000. Other compound classes with surfactant properties such as proteins, humic acids, and synthetic detergents were also analyzed. Foam occurrence paralleled with saponin concentration and with the amounts of detached Ranunculus biomass accumulating at the dam of the hydroelectric power plant of Schaffhausen located just above the Rhine Fall but not with the concentration of synthetic detergents. The ecotoxicological potential of Ranunculus constituents, water, and foam samples was checked with a representative range of aquatic indicator organisms. No acute toxicity was observed at concentrations that were at least 50-fold higher than those found in the environmental samples.