Viral quantitative capillary electrophoresis for counting intact viruses

The quantification of a virus plays an important role in vaccine development, clinical diagnostics, and environmental contamination assays. In all these cases, it is essential to calculate the concentration or number of intact virus particles (ivp) and estimate the degree of degradation and contamination of virus samples. In this work, we propose a cost-efficient, robust method for the quantification and characterization of intact viruses based on capillary zone electrophoresis. This separation method is demonstrated on vaccinia virus (VV) with oncolytic properties. After virus sample preparation, the solution contains intact VV as well as broken viruses and residual DNA from the host cell used for preparation. Regulatory requirements limit the amount of the host cell DNA that can be present in vaccines or human therapeutics. We apply capillary electrophoresis to separate intact virus particles and the residual DNA and to measure the level of virus contamination with DNA impurities. Intercalating YOYO-1 dye is used to detect the encapsulated and free DNA by laser-induced fluorescence. After soft lysis of VV with proteinase K, all encapsulated DNA is dissolved to the free DNA. The change in peak areas and a DNA calibration curve help determine the initial concentration of intact viruses. This viral quantitative capillary electrophoresis (Viral qCE) is able to quantify the oncolytic vaccinia virus in the range of 10(6) to 10(12) ivp/mL.     

NiZnCu Ferrite Thick Film with Nano Scale Crystallites Formed by the Aerosol Deposition Method

This paper describes the magnetic properties of NiZnCu ferrite film deposited at room temperature by an aerosol deposition method (ADM). The thickness of the film was 6 μm and the deposition rate was estimated as 2 μm/min. The microstructure of as-deposited at room temperature films consists of randomly oriented nanocrystallites with a size of 20 nm. As-deposited and annealed films exhibited the following magnetic properties: intensity of magnetization M _s= 0.147 T (117 emu/cm³), coercivity H _c= 40.58 kA/m (510 Oe); and M _s= 0.3 T (250 emu/cm³), H _c= 14.95 kA/m (188 Oe), respectively.     

Digitizing a Dictionary of Medieval Irish: the eDIL Project

The Centre for Irish and Celtic Studies at the University ofUlster is currently producing a digital dictionary of medievalIrish (eDIL) based on the standard Dictionary of the Irish Languagepublished by the Royal Irish Academy, Dublin. This paper addressessome of the problems encountered in the digitization process,including data capture, processing non-standard characters,modifications to the TEI guidelines, automatic generation oftags, and the establishment of a lexical view while preservingthe original format of the paper dictionary.     

开关电源动态负载的探讨

前言 同步降压型开关电源具有输出电流大、效率高等优点,适合电池供电、注重效率的笔记本电脑等产品。一般笔记本电脑各部分组件,如CPU、芯片组、绘图芯片、内存、硬盘、光驱等,对电源电压/电流的要求不同。因此笔记本电脑内需要多路降压型DC/DC转换器产生不同的输出电压/电流,这些DC/DC转换器大多采用脉冲宽度调制(PWM)。     

继电器触点回跳消除电路

半导体技术的进展已使集成电路(IC)能够取代很多机械式继电器,但在任意极性的高电压大电流电路中,继电器仍然占据主导地位.然而,这类继电器的触点回跳会给下游电路带来麻烦.解决触点回跳的一种办法是把继电器与一个热插拔控制器结合起来.     

Experimental and theoretical study of light scattering by individual mature red blood cells by use of scanning flow cytometry and a discrete dipole approximation

Elastic light scattering by mature red blood cells (RBCs) was theoretically and experimentally analyzed by use of the discrete dipole approximation (DDA) and scanning flow cytometry (SFC), respectively. SFC permits measurement of the angular dependence of the light-scattering intensity (indicatrix) of single particles. A mature RBC is modeled as a biconcave disk in DDA simulations of light scattering. We have studied the effect of RBC orientation related to the direction of the light incident upon the indicatrix. Numerical calculations of indicatrices for several axis ratios and volumes of RBC have been carried out. Comparison of the simulated indicatrices and indicatrices measured by SFC showed good agreement, validating the biconcave disk model for a mature RBC. We simulated the light-scattering output signals from the SFC with the DDA for RBCs modeled as a disk-sphere and as an oblate spheroid. The biconcave disk, the disk-sphere, and the oblate spheroid models have been compared for two orientations, i.e., face-on and rim-on incidence, relative to the direction of the incident beam. Only the oblate spheroid model for rim-on incidence gives results similar to those of the rigorous biconcave disk model.     

Dynamics of field-driven domain-wall propagation in ferromagnetic nanowires

Ferromagnetic nanowires are likely to play an important role in future spintronic devices. Magnetic domain walls, which separate regions of opposing magnetization in a nanowire, can be manipulated and used to encode information for storage or to perform logic operations. Owing to their reduced size and dimensionality, the characterization of domain-wall motion is an important problem. To compete with other technologies, high-speed operation, and hence fast wall propagation, is essential. However, the domain-wall dynamics in nanowires has only been investigated in the last five years and some results indicate a drastic slowing down of wall motion in higher magnetic fields. Here we show that the velocity-field characteristic of a domain wall in a nanowire shows two linear regimes, with the wall mobility at high fields reduced tenfold from that at low fields. The transition is marked by a region of negative differential mobility and highly irregular wall motion. These results are in accord with theoretical predictions that, above a threshold field, uniform wall movement gives way to turbulent wall motion, leading to a substantial drop in wall mobility. Our results help resolve contradictory reports of wall propagation velocities in laterally confined geometries, and underscore the importance of understanding and enhancing the breakdown field for practical applications.     

An embedded optical tracking system for motion-corrected magnetic resonance imaging at 7T

Object

Prospective motion correction using data from optical tracking systems has been previously shown to reduce motion artifacts in MR imaging of the head. We evaluate a novel optical embedded tracking system.

Materials and methods

The home-built optical embedded tracking system performs image processing within a 7T scanner bore, enabling high speed tracking. Corrected and uncorrected in vivo MR volumes are acquired interleaved using a modified 3D FLASH sequence, and their image quality is assessed and compared.

Results

The latency between motion and correction of the slice position was measured to be (19?±?5)?ms, and the tracking noise has a standard deviation no greater than 10???m/0.005° during conventional MR scanning. Prospective motion correction improved the edge strength by 16?% on average, even though the volunteers were asked to remain motionless during the acquisitions.

Conclusion

Using a novel method for validating the effectiveness of in vivo prospective motion correction, we have demonstrated that prospective motion correction using motion data from the embedded tracking system considerably improved image quality.     

Crosslinking of addition copolymers from tricyclononenes bearing (CH3)3Si‐ and (C2H5O)3Si‐groups as a modification of membrane gas separation materials

Here, we report the synthesis and the study of gas‐transport properties of crosslinked highly permeable copolymers from Si‐containing norbornene derivatives. The initial high‐molecular‐weight copolymers were prepared via addition copolymerization of 3‐trimethylsilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSi1) with 3‐triethoxysilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSiOEt) in good or high yields using a Pd‐catalyst. The obtained copolymers included up to 10 mol% of TCNSiOEt units bearing reactive Si–O–C‐containing substituents. The crosslinking was readily realized by using simple sol–gel chemistry in the presence of Sn‐catalyst. The formed crosslinked copolymers were insoluble in common organic solvents. Permeability coefficients of various gases (He, H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, n‐C₄H₁₀) in these copolymers before and after crosslinking were determined and the influence of the incorporated TCNSiOEt units as well as the crosslinking on gas transport properties were established. As a result, it was found that only a small reduction of gas‐permeability was observed when TNCSiOEt units were incorporated into the main chains, and the copolymers were crosslinked. At the same time, the selectivity for C₄H₁₀/CH₄ pair was increased. The suggested approach has allowed obtaining crosslinked polymers from Si‐containing monomers without a loss of the main membrane characteristics. POLYM. ENG. SCI., 59:2502–2507, 2019. © 2019 Society of Plastics Engineers     

Graphene oxide conversion into controllably carboxylated graphene layers via photoreduction process in the inert atmosphere

Abstract

The one-step method for graphene oxide (GO) simultaneous reduction and carboxylation via ultraviolet irradiation in the inert atmosphere has been reported. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) data revealed that the proposed approach allows to obtain reduced graphene oxide (rGO) films, containing up to 10 at.% of carboxyl groups. The carboxyl groups concentration can be tuned within the range of 3 to 10 at.% by controlling the oxidation degree of the irradiated GO via the preliminary low-temperature air heating. Furthermore, no carboxylation effect is observed in the case of irradiation of the completely reduced GO films. This coincides with our previous results, validating the proposed model of GO carboxylation based on photoinduced conversion of basal-plane hydroxyl groups and ketones into carboxyl ones. Despite a different degree of carboxylation, all the obtained samples demonstrate almost complete elimination of basal plane groups and restoration of the graphene flakes aromatic structure. This fact is emphasized by the sheet resistance measurements, demonstrating that the obtained C-xy graphene exhibits high electrical conductivity. As a net result, the material obtained by the presented method shows promising applications in the manufacturing of biosensor transducers owing to both its conductive nature and presence of carboxyl groups, playing the role of the anchoring points for biomolecules.