Use of waste materials--Bottom Ash and De-Oiled Soya, as potential adsorbents for the removal of Amaranth from aqueous solutions

Bottom Ash, a power plan t waste material and De-Oiled Soya, an agriculture waste product were successfully utilized in removing trisodium 2-hydroxy-1-(4-sulphonato-1-naphthylazo)naphthalene-3,6-disulphonate--a water-soluble hazardous azo dye (Amaranth). The paper incorporates thermodynamic and kinetic studies for the adsorption of the dye on these two waste materials as adsorbents. Characterization of each adsorbent was carried out by I.R. and D.T.A. curves. Batch adsorption studies were made by measuring effects of pH, adsorbate concentration, sieve size, adsorbent dosage, contact time, temperature etc. Specific rate constants for the processes were calculated by kinetic measurements and a first order adsorption kinetics was observed in each case. Langmuir and Freundlich adsorption isotherms were applied to calculate thermodynamic parameters. The adsorption on Bottom Ash takes place via film diffusion process at lower concentrations and via particle diffusion process at higher concentrations, while in the case of De-Oiled Soya process only particle diffusion takes place in the entire concentration range.     

End effects in a MHD channel with diverging electrode walls

End effects phenomena in a Faraday type generator with diverging electrode walls for two types of velocity profiles—one with a source velocity and the other with a fully developed velocity—are discussed. The electric potential is determined numerically using the successive overrelaxation method in polar coordinates. It is found that the viscous forces increase the end losses and create current concentrations on the electrodes even at far distances from the entrance.     

Flexure of a thin elastic ring due to a dynamic concentrated load

The problem of a thin elastic ring subjected to a time dependent concentrated load in its plane is considered and simplified expressions are derived for the deflection and bending moment under the point of application of the load. The analysis is based on an infinite series of modes of free vibrations of a circular ring. It is shown that for the calculation of deflection and bending moment, closed form expressions can be obtained when one replaces the series by integrals. These expressions reduce to the corresponding expressions of a straight beam when the radius of the ring becomes infinite. Finally the results are given for a case when the load varies in the manner of a half-sine pulse.     

ASPE: attribute-based secure policy enforcement in vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) are usually operated among vehicles moving at high speeds, and thus their communication relations can be changed frequently. In such a highly dynamic environment, establishing trust among vehicles is difficult. To solve this problem, we propose a flexible, secure and decentralized attribute based secure key management framework for VANETs. Our solution is based on attribute based encryption (ABE) to construct an attribute based security policy enforcement (ASPE) framework. ASPE considers various road situations as attributes. These attributes are used as encryption keys to secure the transmitted data. ASPE is flexible in that it can dynamically change encryption keys depending on the VANET situations. At the same time, ASPE naturally incorporates data access control policies on the transmitted data. ASPE provides an integrated solution to involve data access control, key management, security policy enforcement, and secure group formation in highly dynamic vehicular communication environments. Our performance evaluations show that ASPE is efficient and it can handle large amount of data encryption/decryption flows in VANETs.     

Essential Oil of <Emphasis Type="Italic">Artemisia scoparia</Emphasis> Inhibits Plant Growth by Generating Reactive Oxygen Species and Causing Oxidative Damage

We investigated the chemical composition and phytotoxicity of the essential oil extracted from leaves of Artemisia scoparia Waldst. et Kit. (red stem wormwood, Asteraceae). GC/GC-MS analyses revealed 33 chemical constituents representing 99.83% of the oil. The oil, in general, was rich in monoterpenes that constitute 71.6%, with β-myrcene (29.27%) as the major constituent followed by (+)-limonene (13.3%), (Z)-β-ocimene (13.37%), and γ-terpinene (9.51%). The oil and β-myrcene were evaluated in a dose–response bioassay under laboratory conditions for phytotoxicity against three weeds—Avena fatua, Cyperus rotundus, and Phalaris minor. A significant reduction in germination, seedling growth, and dry matter accumulation was observed in the test weeds. At the lowest treatment of 0.07 mg/ml Artemisia oil, germination was reduced by 39%, 19%, and 10.6% in C. rotundus, P. minor, and A. fatua, respectively. However, the inhibitory effect of β-myrcene was less. In general, a dose-dependent effect was observed and the growth declined with increasing concentration. Among the three weeds, the inhibitory effect was greatest on C. rotundus, so it was selected for further studies. We explored the explanation for observed growth inhibition in terms of reactive oxygen species (ROS: lipid peroxidation, membrane integrity, and amounts of conjugated dienes and hydrogen peroxide)-induced oxidative stress. Exposure of C. rotundus to Artemisia oil or β-myrcene enhanced solute leakage, indicating membrane disintegration. There were increased levels of malondialdehyde and hydrogen peroxide, indicating lipid peroxidation and induction of oxidative stress. We conclude that Artemisia oil inhibits plant root growth through generation of ROS-induced oxidative damage.     

Batch and bulk removal of hazardous dye, indigo carmine from wastewater through adsorption

An inexpensive adsorption method has been developed for the removal of indigo carmine, a highly toxic indigoid class of dye from wastewater. Waste materials--bottom ash, a power plant waste and de-oiled soya, an agricultural waste--have been used as adsorbents. Attempts have been made through batch and bulk removal of the dye and both the adsorbents have been found to exhibit good efficiency to adsorb indigo carmine. Under batch technique effect of temperature, pH, concentration, dosage of adsorbents, sieve size of adsorbents, etc. have been observed. The dye uptake on to both the adsorbents is found to validate Langmuir and Freundlich adsorption isotherms models. Different thermodynamic parameters, like Gibb's free energy, enthalpy and entropy of the on-going adsorption process have also been evaluated. Batch technique has also been employed for the kinetic measurements and the adsorption follows a first order rate kinetics for both the adsorbents. The kinetic investigations also reveal for both the adsorbents film diffusion and particle diffusion mechanisms are operative in the lower and higher concentration ranges, respectively. Under the bulk removal, indigo carmine has been adsorbed through the column beds of bottom ash and de-oiled soya and more than 90% of the dye material has been recovered by eluting dilute NaOH solution through exhausted columns.     

Process development for the removal and recovery of hazardous dye erythrosine from wastewater by waste materials-Bottom Ash and De-Oiled Soya as adsorbents

Erythrosine is a water-soluble xanthene class of dye. It is widely used as colorant in foods, textiles, drugs and cosmetics. It is highly toxic, causes various types of allergies, thyroid activities, carcinogenicity, DNA damage behaviour, neurotoxicity and xenoestrogen nature in the humans and animals. The photochemical and biochemical degradation of the erythrosine is not recommended due to formation of toxic by-products. The present paper is an attempt to remove erythrosine from wastewater using adsorption over Bottom Ash-a power plant waste and De-Oiled Soya-an agricultural waste. Under the batch studies, effect of concentration of dye, temperature, pH of the solution, dosage of adsorbents, sieve size of adsorbents, etc., have been studied for the uptake of the dye over both adsorbents. The adsorption process verifies Langmuir and Freundlich adsorption isotherms in both the cases and based on the data different thermodynamic parameters have been evaluated. Batch studies also include kinetic measurements, rate constant study, mass transfer behaviour and establishment of mechanistic pathway for both the cases. For the bulk removal of the dye column operations have been carried out and breakthrough capacities of the Bottom Ash and De-Oiled Soya columns have been calculated. Attempts have also been made for the recovery of the adsorbed dye from exhausted columns by eluting dilute NaOH and more than 90% of the dye was recovered.     

Formulation,optimization, hemocompatibility and pharmacokinetic evaluation of PLGA nanoparticles containing paclitaxel

Objective: Paclitaxel (PTX)-loaded polymer (Poly(lactic-co-glycolic acid), PLGA)-based nanoformulation was developed with the objective of formulating cremophor EL-free nanoformulation intended for intravenous use.

Significance: The polymeric PTX nanoparticles free from the cremophor EL will help in eliminating the shortcomings of the existing delivery system as cremophor EL causes serious allergic reactions to the subjects after intravenous use.

Methods and results: Paclitaxel-loaded nanoparticles were formulated by nanoprecipitation method. The diminutive nanoparticles (143.2?nm) with uniform size throughout (polydispersity index, 0.115) and high entrapment efficiency (95.34%) were obtained by employing the Box–Behnken design for the optimization of the formulation with the aid of desirability approach-based numerical optimization technique. Optimized levels for each factor viz. polymer concentration (X1), amount of organic solvent (X2), and surfactant concentration (X3) were 0.23%, 5?ml %, and 1.13%, respectively. The results of the hemocompatibility studies confirmed the safety of PLGA-based nanoparticles for intravenous administration. Pharmacokinetic evaluations confirmed the longer retention of PTX in systemic circulation.

Conclusion: In a nutshell, the developed polymeric nanoparticle formulation of PTX precludes the inadequacy of existing PTX formulation and can be considered as superior alternative carrier system of the same.