Synergistic effect of nanoparticles and Thalassospira sp. isolated from Bahregan area in biodegradation of oil sludge

Oil sludge is obtained from the contaminated site of Bahregan area in the Persian Gulf in Iran. Chemotaxis was used for the isolation of alkane-degrading bacteria from oil sludge and the alk genes were determined with specific primers. bac1 identified in Thalassospira was selected as a powerful strain for biodegradation of oil sludge. Biodegradation of oil sludge by bac1 in the presence of nanoparticles was investigated by GC-MS analysis. Synergistic effect of Fe₂O₃ and Fe₃O₄ nanoparticles on bacteria increases the biodegradation of oil sludge and produces cyclosiloxane compound which is used in the field of medicine; however, the Thalassospira reduced its toxicity in the environment.     

Castor oil-based polyurethane coatings containing benzyl triethanol ammonium chloride: synthesis,characterization, and biological properties

In the present work, benzyl triethanol ammonium chloride (BTEAC) was employed as a reactive bactericidal additive for preparing of polyurethane coatings. In this regard, castor oil as a renewable resource-based polyol, polyethylene glycol (PEG1000), and BTEAC were reacted with toluene diisocyanate. Physical, mechanical, and thermal characteristics as well as biocompatibility and antibacterial properties of polyurethanes were evaluated. The prepared polyurethanes showed two-phase structure with soft and hard segments glass transition temperature transitions in the range of 18–70 and 85–153 °C, respectively. Initial modulus and tensile strength were improved for coatings with higher BTEAC content, while elongation at break and thermal stability were decreased. Hydrophilicity of coatings was increased for polyurethanes based on higher content of BTEAC and PEG1000. Polyurethanes with higher BTEAC content showed better cytocompatibility for mouse L929 fibroblast cells. Moreover, coatings with higher hydrophilicity and BTEAC content displayed superior antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria.     

An improvement of quantitative strategic planning matrix using multiple criteria decision making and fuzzy numbers

The Quantitative Strategic Planning Matrix (QSPM) is a useful tool to prioritize strategies at any level including corporate, business and functional. The ratings and attractive scores used in QSPM, however, require judgmental decisions and should be based on expert's opinion to ensure the applicability of chosen strategies. Application of a fuzzy multi-criteria decision making method is proposed in this paper with the goal of improving the output of conventional QSPM by allowing the experts to employ linguistic terms (qualitative data) in their judgments. Namely, a multi-criteria decision making index via the technique for Order Preference by Similarity to Ideal Solution (TOPSIS) is adapted to the fuzzy QSPM in finding the sum total attractive scores of strategies. As a case study, the proposed method has been applied for strategy prioritization in a Tile Company. The results have been verified with expert knowledge and showed an improvement compared to the non-fuzzy QSPM.     

Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint

To study the effect of chemical composition on microstructural features and mechanical properties of dissimilar joints between super duplex and austenitic stainless steels, welding was attempted by gas tungsten arc welding process with a super duplex (ER2594) and an austenitic (ER309LMo) stainless steel filler metal. While the austenitic weld metal had vermicular delta ferrite within austenitic matrix, super duplex stainless steel was mainly comprised of allotriomorphic grain boundary and Widmanstätten side plate austenite morphologies in the ferrite matrix. Also the heat-affected zone of austenitic base metal comprised of large austenite grains with little amounts of ferrite, whereas a coarse-grained ferritic region was observed in the heat-affected zone of super duplex base metal. Although both welded joints showed acceptable mechanical properties, the hardness and impact strength of the weld metal produced using super duplex filler metal were found to be better than that obtained by austenitic filler metal.     

Time–cost optimization: using GA and fuzzy sets theory for uncertainties in cost

Uncertainties should be considered in any time–cost trade‐off problems when minimizing project cost and duration, which leads to the so‐called stochastic time–cost trade‐off problem. A new approach to investigate stochastic time–cost trade‐off problems employing fuzzy logic theory is presented. The proposed approach fully embeds the fuzzy structure of the uncertainties in total direct cost into the model. An appropriate GA is used to develop a solution to the multi‐objective fuzzy time cost model. The accepted risk level of the project manager is defined through α cut approach for which a separate Pareto front with set of non‐dominated solutions has been developed. To compare the alternative set of options for any assumed project duration, associated fuzzy costs for different values of α cut are ranked employing two appropriate approaches for fuzzy costs comparison. The proposed models are applied to solve two benchmark test problems. It is shown that the models facilitate the decision‐making process by selecting specified risk levels and employing the associated Pareto front.     

Study of inhibition effect of carboxylic salt derivative on corrosion of C1010 carbon steel in saline solution

In the present work, sodium 4-[(4-formylbenzylidene) amino] benzoiate (4) was synthesized and its structure was confirmed using spectroscopic techniques. Prepared compound was successfully applied as a corrosion inhibitor for C1010 carbon steel in 3.5% NaCl solution at 25°C. Different electrochemical measurements such as linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) were used to evaluate the suggested inhibitor (4). The results of different electrochemical measurements show that inhibition efficiencies obtained from EIS curves are in consistence with the results of potentiodynamic polarization and LPR measurements due to increase corrosion inhibition efficiency by increasing the concentration of organic inhibitor (4). Semi-empirical calculations with PM3 method were used to find relationship between molecular structure and inhibiting effect of suggested inhibitor (4).     

Bimetal cup hydroforming of Al/St and Cu/St composites: Adaptive finite element analysis and experimental study

Journal of Mechanical Science and Technology - An adaptive Finite element analysis (FEA) was proposed in this paper for the industrial design of bimetal conical-cylindrical cup hydroforming....     

Bioaugmentation of floating treatment wetlands for the remediation of textile effluent

This pilot study evaluated the effects of bacterial augmentation on the efficiency of floating treatment wetlands (FTWs) to remediate textile wastewater. Two wetland plants, Phragmites australis and Typha domingensis, were used to develop FTWs, which were then augmented with a bacterial consortium of three strains (Acinetobacter junii, Pseudomonas indoloxydans, and Rhodococcus sp.). Results showed that both plant species removed colour, organic matter, toxicity, and heavy metals from textile wastewater and their removal efficiency was further enhanced by augmentation with bacteria. The maximum removal efficiencies of colour, COD and BOD after an 8‐day period were 97, 87 and 92%, respectively, by FTWs carrying P. australis inoculated with the bacterial consortium. Furthermore, the same combination showed 87–99% reduction of heavy metals in the textile wastewater as well. These results indicate that FTWs can be used for the treatment of textile effluent and their working efficiency can be improved by plant‐bacterial synergism.