Mechanical and thermo-oxidative properties of blends of poly(vinyl chloride) with epoxidized natural rubber and acrylonitrile butadiene rubber in the presence of an antioxidant and a base

Being polar and compatible with poly(vinyl chloride), epoxidized natural rubber (ENR) is similar in behaviour to acrylonitrile butadiene rubber (NBR). To assess the extent of this similarity, the mechanical properties of 50/50 blends of PVC with these two rubbers were compared. Their response to thermo-oxidative ageing in the presence of an antioxidant and a base was also investigated by ageing the blends at 100°C for 7 days. Studies involving mechanical properties and FTIR were used to evaluate the extent of thermal degradation. The results revealed that blends of ENR show mechanical properties which are as good as, and in some instances better than, those of the NBR blends. However, the ENR blends with PVC are very prone to oxidative ageing. This might be attributed to the susceptibility of the oxirane group to ring-opening reactions, particularly in the presence of PVC, which yields HCl as it degrades. The amine-type antioxidant 2,24-trimethyl-1,2-dihydroquinoline (TMQ) improved the oxidative stability of both blends. This was more significant in the ENR blend, which in some cases attained stability comparable with that of NBR. The addition of a base, calcium stearate [Ca(St)₂], did not show any influence in the PVC/ENR blend, even though it was expected to curb acid-catalysed degradation. Ca(St)₂, however, improved the oxidative stability of the PVC/NBR blend. The combination of optimum amounts of TMQ and Ca(St)₂ effectively improved the tensile strength of both unaged blends, without appreciable adverse effect on elongation at break. This combination also imparted stability better than that of TMQ alone.     

Distribution of Partial Digestion Products of Hydroxypropyl Derivatives of Maize (NM), Waxy Maize (WM) and High Amylose (HA) Maize Starches

Porcine pancreatic α-amylase digests of native and hydroxypropyl derivatives of maize, waxy maize and high amylose maize starches were subjected to ethanolic fractionation into oligosaccharide and polysaccharide fractions. Both fractions of the partial digests were analysed for blue values, reducing values, total carbohydrate, average degree of polymerisation and molar substitution (MS). Distribution of hydroxypropyl groups between the fractions varied depending on starch type and level of substitution with the polysaccharide fraction being higher in MS. Blue values (BV) and average degree of polymerisation (DP) tended to decrease with digestion while reducing (RV) increased.     

Effect of pH,Temperature and Reaction Time on Calcium Binding by Hydroxypropyl Rice Starches

Calcium binding by both native and hydroxypropyl starches was studied in aqueous media under different pH, temperature and reaction times at various calcium: starch ratios. Calcium binding was markedly influenced by pHs and temperatures of the reaction mixture. Reaction times did not show marked influence on calcium binding. Maximum calcium binding was observed in alkaline pH and at lower temperature. Most of the calcium bound within the first 20 minutes. Thus, alkaline pH and lower temperature is more favourable for calcium binding by both native and hydroxypropyl rice starches compared to acidic pH and higher temperatures.     

A real-time distributed algorithm for an aircraft longitudinal optimal autopilot

This paper is concerned with fast and efficient computations for the solution of the two-point boundary-value problem that arises in optimal control of an aircraft longitudinal mode. The solution proposed is implemented on a T800 transputer network using parallel C and is shown to be adequate for real-time control purposes.     

Two-step purification strategy for enhanced recovery of recombinant hepatitis B surface antigen from Pichia pastoris

Univariate screening on factors affecting the purification performance of recombinant hepatitis B surface antigen (HBsAg) on ion exchange chromatography (IEC) and size exclusion chromatography (SEC) and the establishment of a two-step purification strategy were performed. Amongst four IEC adsorbents examined, the use of Q Sepharose XL IEC adsorbent under optimized conditions together with optimized SEC purification was able to efficiently purify HBsAg. An established purification strategy comprising the two techniques further demonstrated adaptability for scale-up operations with a final total purification factor (PF) of 94.82 ± 16.20, HBsAg purity of 95.48% and recovery yield of 78.07%.     

Characterization of Waste and Reclaimed Green Sand Used in Foundry Processing

Silicon - The aim of this study is to discuss the importance of characterization of green, waste green and reclaimed sand. The transformations and changes which take place in the green sand, are...     

Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Comparison of the mechanical properties and interfacial interactions between talc,kaolin, and calcium carbonate filled polypropylene composites

Three types of mineral fillers—talc, calcium carbonate (CaCO₃), and kaolin (10–40 wt % filler loadings)—were compounded with polypropylene (PP) with a twin‐screw extruder. The composites were injection‐molded, and the effects of the filler loading on the mechanical, flow, and thermal properties for the three different types of filled composites were investigated. The aim was to compare their properties and to deduce prospective filler combinations that would yield hybrid PP composites in following studies. The results showed that in most cases, the strength and stiffness of the talc‐filled PP composites was significantly higher than those of the CaCO₃‐ and kaolin‐filled PP composites. However, CaCO₃, being a nonreactive filler, increased the toughness of PP. The kaolin‐filled PP composites also showed some improvement in terms of strength and stiffness, although the increases in these properties were not as significant as those of the talc‐filled PP composites. The effects of interfacial interactions between the fillers and PP on the mechanical properties were also evaluated with semiempirical equations. The nucleating ability of all three fillers was studied with differential scanning calorimetry, and the strongest nucleating agent of the three was talc, followed by CaCO₃ and kaolin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3315–3326, 2004