Hazardous impact of toxic metals on tobacco leaves grown in contaminated soil by ultrasonic assisted pseudo-digestion: multivariate study

Tobacco leaves (Nicotiana tabacum L.), agricultural soil and pollute irrigated lake water samples were collected during 2005–2006 and analyzed for Cd and Ni by electrothermal atomic absorption spectrometry (ETAAS). A simple and efficient procedure was investigated for the complete decomposition of tobacco leaves using ultrasonic assisted acid pseudo-digestion method (UPDM). A Plackett–Burman experimental design was used as a multivariate strategy for the evaluation of seven factors/variables at once, while central composite were used to found optimum values of significant variables. The accuracy of the proposed methods was assessed by analyzing certified reference (CRM); Virginia tobacco leaves (CTA-VTL-2). The results being compared with those obtained by conventional wet acid digestion method. The result obtained by optimized method showed good agreement with the certified values and sufficiently high recovery 97.8 and 98.7% for Cd and Ni, respectively. Under optimal conditions, the detection limits (3σ) were evaluated to be 0.019 μg g⁻¹ for Cd and 0.37 μg g⁻¹ for Ni. The proposed method was successfully applied to the determination of Cd and Ni in raw, processed tobacco and different branded cigarettes samples.     

Matching ultrasonic transducer using two matching layers where one of them is glue

The aim of this work is to propose an original solution to the acoustic impedance mismatch between a PZT transducer and a water load. The characteristic acoustic impedance of the PZT is around 33 MRayl. Theoretically, a quarter-wave layer with characteristic acoustic impedance equal to 7 MRayl is necessary to match the transducer to water. In practice, it is difficult to find a material with this particular impedance. Two or more quarter-wave layers may also be used. The following proposed solution consists in using two matching layers where one of them is the glue. Moreover, their thicknesses are not equal to a quarter of their individual wavelength. Once the glue is taken as the first matching layer, the specific material of the second layer can easily be found. In this work, the second layer, which is also the front layer, is made of glass. The thickness of each matching layer is then calculated as a function of the characteristic acoustic impedance of the two layers. The influence of the thickness of these layers is discussed. The proposed matching configuration is analyzed and theoretical results have been carefully and successfully compared with measurements.     

Health risk assessment of inorganic arsenic intake of Cambodia residents through groundwater drinking pathway

In order to compare the magnitudes and health impacts of arsenic and other toxic trace elements in well water, groundwater and hair samples were collected from three areas with different arsenic exposure scenarios in the Mekong River basin of Cambodia. Ampil commune in Kampong Cham province was selected as an uncontaminated area, Khsarch Andaet commune in Kratie province was selected as a moderately contaminated area, and Kampong Kong commune in Kandal Province was selected as an extremely contaminated area. Results of ICP-MS analyses of the groundwater samples revealed that As, Mn, Fe and Ba concentrations were significantly different among the three study areas (Kruskal-Wallis test, p < 0.0001). Out of 46 observed wells in the Kandal province study area, 100% detected As > 50 μg L⁻¹ and Fe > 300 μg L⁻¹; 52.17% had Mn > 400 μg L⁻¹ and 73.91% found Ba > 700 μg L⁻¹. In the Kratie province study area (n = 12), 25% of wells showed elevated arsenic levels above 10 μg L⁻¹ and 25% had Mn > 400 μg L⁻¹, whereas samples from Kampong Cham province study area (n = 18) were relatively clean, with As < 10 μg L⁻¹. A health risk assessment model derived from the USEPA was applied to calculate individual risks resulting from drinking groundwater. Computational results indicated that residents from Kandal Province study area (n = 297) confronted significantly higher non-carcinogenic and carcinogenic risks than those in Kratie (n = 89) and Kampong Cham (n = 184) province study areas (Kruskal-Wallis test, p < 0.0001). 98.65% of respondents from the Kandal province study area were at risk for the potential non-cancer effect and an average cancer risk index was found to be 5 in 1000 exposure. The calculations also indicated that, in the Kratie province study area, 13.48% of respondents were affected by non-cancer health risks and 33.71% were threatened by cancer, whereas none of respondents in the Kampong Cham province study area appeared to have non-carcinogenic effect. Positively significant correlations of the arsenic content in scalp hair (As_h) with both arsenic levels in groundwater (As_w) (r_s (304) = 0.757, p < 0.0001) and individual average daily doses (ADD) of arsenic (r_s (304) = 0.763, p < 0.0001) undoubtedly indicated that arsenic accumulation in the bodies of Cambodia residents in the Mekong River basin was mainly through a groundwater drinking pathway. To the best of our knowledge, this is the first comprehensive report comparing individual health risk assessments of arsenic exposure through a groundwater drinking pathway to enriched arsenic levels from groundwater in the Mekong River basin, Cambodia. This study indicates that elevated arsenic concentrations in groundwater may lead to thousands of cases of arsenicosis in the near future if mitigating actions are not taken.     

BANQ餐厅 美国波士顿

正Banq餐厅位是一家新型餐厅,位于便士储蓄银行(Penny Savings Bank)旧大楼以前用来经营银行业务的大厅内。餐厅分成两个部分,前面区域面向华盛顿大街,设计成酒吧,后面的大厅则作为用餐区。然而,这个空间在z轴上以天花板和地面之间的另一个分区为中心进行设计。如果由于餐厅空间活动的多变性而需要保持灵活性——包括两个座位、四个座位和六个座位,以及与聚会和其他活动有关的座位     

Inhalation risk of indoor aerosol spray products commercially available in Bangladesh

Today, urbanised people spend most of their time in indoor environments, and the risk of exposure to toxic materials in an indoor environment is of great concern. This paper considers sources for the inhalation risk of aerosol sprays by measuring the particle size distributions of some of the most popular products that are commercially available in Bangladesh, and examines the degree of toxicity and the health risk via the respirability of the products. Results show that thoracic and respirable fractions of the suspended particulate matter are present in the tested samples and hence the spray products may pose a significant health risk.     

Slope instability analysis in Phyllitic rock in the Lesser Himalayan using three different modeling approach

Bulletin of Engineering Geology and the Environment - The numerical methods for slope stability problems always have a serious concern related to their continuum and discontinuum nature. In...     

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m³), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.     

The magnitude of arsenic contamination in groundwater and its health effects to the inhabitants of the Jalangi--one of the 85 arsenic affected blocks in West Bengal, India

To better understand the magnitude of arsenic contamination in groundwater and its effects on human beings, a detailed study was carried out in Jalangi, one of the 85 arsenic affected blocks in West Bengal, India. Jalangi block is approximately 122 km2 in size and has a population of 215538. Of the 1916 water samples analyzed (about 31% of the total hand tubewells) from the Jalangi block, 77.8% were found to have arsenic above 10 microg l(-1) [the World Health Organization (WHO)-recommended level of arsenic in drinking water], 51% had arsenic above 50 microg l(-1) (the Indian standard of permissible limit of arsenic in drinking water) and 17% had arsenic at above 300 microg l(-1) (the concentration predicting overt arsenical skin lesions). From our preliminary medical screening, 1488 of the 7221 people examined in the 44 villages of Jalangi block exhibit definite arsenical skin lesions. An estimation of probable population that may suffer from arsenical skin lesions and cancer in the Jalangi block has been evaluated comparing along with international data. A total of 1600 biologic samples including hair, nail and urine have been analyzed from the affected villages of Jalangi block and on an average 88% of the biologic samples contain arsenic above the normal level. Thus, a vast population of the block may have arsenic body burden. Cases of Bowen's disease and cancer have been identified among adults who also show arsenical skin lesions and children in this block are also seriously affected. Obstetric examinations were also carried out in this block.