A load-aware energy-efficient and throughput-maximized asynchronous duty cycle MAC for wireless sensor networks

Being a pivotal resource, conservation of energy has been considered as the most striking issue in the wireless sensor network research. Several works have been performed in the last years to devise duty cycle based MAC protocols which optimize energy conservation emphasizing low traffic load scenario. In contrast, considering the high traffic situation, another research trend has been continuing to optimize both energy efficiency and channel utilization employing rate and congestion control at the MAC layer. In this paper, we propose A Load-aware Energy-efficient and Throughput-maximized Asynchronous Duty Cycle MAC (LET-MAC) protocol for wireless sensor networks to provide an integrated solution at the MAC layer considering both the low-and high-traffic scenario. Through extensive simulation using ns-2, we have evaluated the performance of LET-MAC. LET-MAC achieves significant energy conservation during low traffic load (i.e., no event), compared to the prior asynchronous protocol, RI-MAC, as well as attains optimal throughput through maximizing the channel utilization and maintains lower delay in regard to the CSMA/CA-like protocol during a high volume of traffic (i.e., when an event occurs).     

New look on relay selection strategies for full-duplex multiple-relay NOMA over Nakagami-m fading channels

Wireless Networks - By removing the orthogonal use of radio-resources, non-orthogonal multiple access (NOMA) has been introduced to improve the spectral efficiency of fifth generation (5G) and...     

Development and Simulation of Sulfur‐doped Graphene Supported Platinum with Exemplary Stability and Activity Towards Oxygen Reduction

Sulfur‐doped graphene (SG) is prepared by a thermal shock/quench anneal process and investigated as a unique Pt nanoparticle support (Pt/SG) for the oxygen reduction reaction (ORR). Particularly, SG is found to induce highly favorable catalyst‐support interactions, resulting in excellent half‐cell based ORR activity of 139 mA mg_Pt ^?1 at 0.9 V vs RHE, significant improvements over commercial Pt/C (121 mA mg_Pt ^?1) and Pt‐graphene (Pt/G, 101 mA mg_Pt ^?1). Pt/SG also demonstrates unprecedented stability, maintaining 87% of its electrochemically active surface area following accelerated degradation testing. Furthermore, a majority of ORR activity is maintained, providing 108 mA mg_Pt ^?1, a remarkable 171% improvement over Pt/C (39.8 mA mg_Pt ^?1) and an 89% improvement over Pt/G (57.0 mA mg_Pt ^?1). Computational simulations highlight that the interactions between Pt and graphene are enhanced significantly by sulfur doping, leading to a tethering effect that can explain the outstanding electrochemical stability. Furthermore, sulfur dopants result in a downshift of the platinum d‐band center, explaining the excellent ORR activity and rendering SG as a new and highly promising class of catalyst supports for electrochemical energy technologies such as fuel cells.     

Bandwidth requirements for accurate detection of direct path in multipath environment

The accurate detection of the direct path in a dense multipath environment is critical in time-based and angle-of-arrival-based location estimation techniques. It is generally assumed that an infinitely large bandwidth is helpful in the accurate detection of the direct path and high-range resolution. It is experimentally demonstrated that, for a wideband system, a bandwidth of up to 4 GHz, centred on 12.5 GHz, is sufficient for accurate detection of direct path in a typical indoor scattering environment. Additionally, the bandwidth gain, incremental range accuracy with bandwidth, is an effective indicator of the bandwidth requirements for accurate detection of the direct path.     

Tunnel diode-loaded rectangular microstrip antenna for millimeter range

Theoretical investigations conducted for Ge tunnel diode-integrated rectangular patch antenna reveals that such an antenna exhibits frequency tunability with the bias voltage. The Ge tunnel diode-loaded patch can be operated in the millimeter range (51.042-54.013 GHz). The range of frequency obtainable for operation is 2971 MHz. The radiation pattern shows variation with the bias voltage and the radiated power, the beamwidth and the directivity vary inversely with the bias voltage. Thus, the Ge tunnel diode-loaded patch can be used to achieve electronic tuning (BW=5.66%) with the bias voltage.     

U-slot Loaded Half Disk Patch Antenna for Mobile Communications

Theoretical investigations of a U-slot loaded half disk patch antenna are presented using equivalent circuit concept. It is found that the antenna shows dual band characteristics with resonant frequency at 4.76 and 6.79 GHz. The dual nature of the antenna is realized by loading shorting pin with U-slot loaded patch. The lower and upper frequency bands are achieved as 443 and 287 MHz respectively. It is noted that the antenna shows frequency ratio of 1.4.     

An Improved Chaotic Cryptosystem for Image Encryption and Digital Watermarking

Wireless Personal Communications - In this article, enhanced chaotic range map is used for data hiding and multimedia security. By using complex properties of improved chaotic logistic map that...     

VLM Precoded SLM Technique for PAPR Reduction in OFDM Systems

Orthogonal frequency division multiplexing (OFDM) is perhaps the most spectrally efficient, robust transmission technique discovered so far for communication systems, and it also mitigates the problem of multipath environment. High peak-to-average power ratio (PAPR) has always been a major drawback of the OFDM systems. In this article, a new precoding technique has been proposed based on Vandermonde-like matrix (VLM) and selective mapping (SLM) to reduce PAPR in OFDM systems. VLM precoding reduces the autocorrelation of the input sequences while SLM takes an advantage of the fact that the PAPR is very sensitive to phase shifts of the signal. The main advantage of this proposed scheme is to achieve a significant reduction in PAPR without increasing the system complexity. Computer simulations show that, the proposed method outperforms the existing precoding techniques without degrading the error performance of the system.     

Four-wave mixing reduction technique based on smart filter approach

This paper proposed a new technique to suppress the four-wave mixing (FWM) effect by using a smart filter technique. The behaviour of FWM and the performance of wavelength division multiplexing systems with 4 and 16 channels were simulated in the presence of the proposed technique. The simulation was also performed under different parameters such as input power, number of channels and channel spacing. The FWM power drastically decreases by 12 and 19 dB for the 4 and 16 channels, respectively, when the smart filter is used as compared with the conventional system. In terms of system performance, the suggested approach for 4 and 16 channels at the first channel offers low bit error rate (BER) values of 3.23 × 10^?23 and 1.7 × 10^?21, respectively. The smart filter with the channel spacing variation for the 4-channel system subsequently improved the BER value at the fourth channel. Results confirm that the smart filter approach is an active solution that can suppress the FWM effect in optical transmission systems.