Shape optimization of a staggered herringbone groove micromixer using three-dimensional Navier-Stokes analysis has been carried out. The analysis of the degree of mixing is performed by the calculation of spatial data statistics. The calculation of the variance of the mass fraction at various nodes on a plane in the channel is used to quantify mixing. A numerical optimization technique is applied to optimize the shape of the grooves on a single wall of the channel. Two design variables, namely, the ratio of the groove depth to channel height ratio and the angle of the groove, are selected for optimization. A mixing index is used as the objective function. The results of the optimization show that the mixing is very sensitive to the shape of the groove which can be used in controlling the mixing in microdevices. The mixing is affected by the depth of the groove much more than the angle of the groove. 相似文献
Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10−3 mol and 50 mL respectively. The optimum reaction temperature was 50 ○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials. 相似文献
The present investigation pertains to modeling of seawater desalination system. A simulation model was developed and verified for a small-scale reverse osmosis system. The proposed model combines material balances on the feed tank, membrane module andproduct tank with membrane mass transfer models. Finally a comprehensive simulation model has been developed incorporating the effect of mass transfer inhibition The model is non-linear differential equation representing the feed concentration as a function of operating time and space. The solution of the simultaneous differential equations was obtained using the fourth order Runge-Kutta method, due to self starting and stability. The model was verified using the experimental data from the literature [17,24]. Parameter sensitivity was carried out to select the proper step size. The simulation was run for over 1000 11 enabling a prediction of operational performance at high overall system recoveries. 相似文献
The study of the movement of solids in multiphase reactors using radioactive particle tracking is currently limited to fairly modest particle velocities because of count‐rate limitations of the detection system. In this work, this restriction was overcome by increasing the activity of the radioactive tracer, by decreasing the sampling time interval and by modifying the particle tracking software to recognize which detectors were saturated and to use only the data from the remaining unsaturated detectors. Higher tracer activity resulted in lower standard deviation of the calculated tracer coordinates. 相似文献
The present article proposes a geometry-based fuzzy relational technique for capturing gradual change in human emotion over time available from relevant face image sequences. As associated features, we make use of fuzzy membership arising out of five triangle signatures such as - (i) Fuzzy Isosceles Triangle Signature (FIS), (ii) Fuzzy Right Triangle Signature (FRS), (iii) Fuzzy Right Isosceles Triangle Signature (FIRS), (iv) Fuzzy Equilateral Triangle Signature (FES), and (v) Other Fuzzy Triangles Signature (OFS) to achieve the task of appropriate classification of facial transition from neutrality to one among the six expressions viz. anger (AN), disgust (DI), fear (FE), happiness (HA), sadness (SA) and surprise (SU). The effectiveness of the Multilayer Perceptron (MLP) classifier is tested and validated through 10 fold cross-validation method on three benchmark image sequence datasets namely Extended Cohn-Kanade (CK+), M&M Initiative (MMI), and Multimedia Understanding Group (MUG). Experimental outcomes are found to have achieved accuracy to the tune of 98.47%, 93.56%, and 99.25% on CK+, MMI, and MUG respectively vindicating the effectiveness by exhibiting the superiority of our proposed technique in comparison to other state-of-the-art methods in this regard.
Prudent management of Iraqi water resources under climate change conditions requires plans to be based on actual figures of the storage capacity of existing reservoirs. With the absence of sediment flushing measures, the actual storage capacity of Dokan Reservoir (operated since 1959) has been affected by the amount of sediment delivered during its operational life leading to an undetermined reduction in its storage capacity. In consequence, there has not been an update on the dam's operational storage capacity curves. In this research, new operational curves were established for the reservoir based on a recent bathymetric survey undertaken in 2014. The reduction in reservoir capacity during the period between 1959 and 2014 was calculated by the mean of the difference between the designed storage capacity and the storage capacity which was concluded from the 2014 bathymetric survey. Moreover, the rate of sediment transported to the reservoir was calculated based on the overall quantities of accumulated sediment and the water discharge of the Lesser Zab River into the reservoir. The results indicate that the dam capacity is reduced by 25% due to sedimentation of an estimated volume of 367 million cubic metres at water level 480 m.a.s.l. The annual sedimentation rate was about 6.6 million cubic metres, and the sediment yield was estimated to be 701.2 t?km?3?year. 相似文献
Finite element analysis (FEA) has been carried out with the aim of understanding the thermal deformation characteristics of two solar cell configurations. One of the solar cell models is tabbed by lead-free solder, the other model by Conductive film (CF). A high temperature soldering process could weaken the bond and reduce the reliability of the cells because of the residual stress caused by the different thermal expansion coefficients of the materials. Moreover, solar irradiation generates temperature distribution across the surface of the solar cell, and the development of solar cells made of thinner crystalline silicon wafers will lead to the reduction in manufacturing costs. In this study, Finite element analysis (FEA) of the manufacturing process has been carried out using both solder and CF bonding. Three temperature cycles were applied to analyze different environmental operating conditions and understand how thermal cycles affect the residual stress during actual service conditions. This investigation provides a comparison of thermal deformations between solder and CF bonded solar cells in order to understand which offers substantial reliability in the long term. Also this study explores the effects of various thicknesses of the silicon wafer on the residual stress and deformation of the solar cells. 相似文献
A waste material called oil fly ash (OFA) was acid-functionalized, yielding f-OFA-COOH, which was then reacted with cerium oxide (CeO2) to make CeO2-functionalized OFA, or f-OFA-CeO2. Pristine OFA and f-OFA-CeO2 were used to make waterborne polyurethane (WBPU) dispersions, referred to as WBPU/OFA and WBPU/f-OFA-CeO2, respectively, with defined OFA and f-OFA-CeO2 content. All the dispersions were applied to mild steel as organic coatings to evaluate their protective properties, such as their hydrophobicity, adhesive strength and UV-shielding resistance. These protective properties varied based on the OFA and f-OFA-CeO2 content. The highest water contact angle, minimum water swelling and maximum adhesive strength were found using WBPU/f-OFA-CeO2-20 coating (using 2.00 wt% f-OFA-CeO2), which also showed the maximum ultraviolet (UV) absorption via UV–vis spectroscopy analysis. This UV shielding result also matched field test results, as that coating was found to exhibit the lowest UV degradation near a marine atmosphere, as shown by X-ray photoelectron spectroscopy (XPS) analysis. The least affected hydrophobicity was also recorded for the sample with the WBPU/f-OFA-CeO2-20 coating. 相似文献
Hydrogels are polymeric materials widely used in medicine due to their similarity with the biological components of the body. Hydrogels are biocompatible materials that have the potential to promote cell proliferation and tissue support because of their hydrophilic nature, porous structure, and elastic mechanical properties. In this work, we demonstrate the microwave-assisted synthesis of three molecular weight varieties of poly(ethylene glycol) dimethacrylate (PEGDMA) with different mechanical and thermal properties and the rapid photo of them using 1-hydroxy-cyclohexyl-phenyl-ketone (Irgacure 184) as UV photoinitiator. The effects of the poly(ethylene glycol) molecular weight and degree of acrylation on swelling, mechanical, and rheological properties of hydrogels were investigated. The biodegradability of the PEGDMA hydrogels, as well as the ability to grow and proliferate cells, was examined for its viability as a scaffold in tissue engineering. Altogether, the biomaterial hydrogel properties open the way for applications in the field of regenerative medicine for functional scaffolds and tissues. 相似文献