Quantification and source characterization of volatile organic compounds from exercising and application of chlorine-based cleaning products in a university athletic center

Humans spend approximately 90% of their time indoors, impacting their own air quality through occupancy and activities. Human VOC emissions indoors from exercise are still relatively uncertain, and questions remain about emissions from chlorine-based cleaners. To investigate these and other issues, the ATHLETic center study of Indoor Chemistry (ATHLETIC) campaign was conducted in the weight room of the Dal Ward Athletic Center at the University of Colorado Boulder. Using a Vocus Proton-Transfer-Reaction Time-of-Flight Mass Spectrometer (Vocus PTR-TOF), an Aerodyne Gas Chromatograph (GC), an Iodide-Chemical Ionization Time-of-Flight Mass Spectrometer (I-CIMS), and Picarro cavity ringdown spectrometers, we alternated measurements between the weight room and supply air, allowing for determination of VOC, NH₃, H₂O, and CO₂ emission rates per person (emission factors). Human-derived emission factors were higher than previous studies of measuring indoor air quality in rooms with individuals at rest and correlated with increased CO₂ emission factors. Emission factors from personal care products (PCPs) were consistent with previous studies and typically decreased throughout the day. In addition, N-chloraldimines were observed in the gas phase after the exercise equipment was cleaned with a dichlor solution. The chloraldimines likely originated from reactions of free amino acids with HOCl on gym surfaces.     

Avalanches on a conical bead pile: scaling with tuning parameters

Uniform spherical beads were used to explore the scaling behavior of a granular system near its critical angle of repose on a conical 3D bead pile. We found two tuning parameters that could take the system to a critical point. The existence of those tuning parameters violates the fundamental assumption of self-organized criticality, which proposed that complex dynamical systems self-organize to a critical point without need for tuning. Our avalanche size distributions were well described by a simple power-law, as is characteristic of a critical point, with the power τ = 1.5 when dropping beads slowly onto the apex of a bead pile from a small height. However, we could also move the system from the critical point using either of two tuning parameters: the height from which the beads fell onto the top of the pile or the region over which the beads struck the pile. As the drop height increased, the system did not reach the critical point yet the resulting distributions were independent of the bead mass, coefficient of friction, or coefficient of restitution. All our apex-dropping distributions for any type of bead (glass, stainless steel, zirconium) showed universality by scaling onto a common curve with τ = 1.5 and σ =?1.0, where 1/σ is the power of the tuning parameter. From independent calculations using the moments of the distribution, we find values for τ = 1.6 ± 0.1 and σ =?0.91 ± 0.15. When beads were dropped across the surface of the pile instead of solely on the apex, then the system also moved from the critical point and again the avalanche size distributions fell on a common curve when scaled similarly using the same values of τ and σ. We also observed that an hcp structure on the base of the pile caused an emergent structure in the pile that had six faces with some fcc or hcp structure; this structure did not affect the distribution of avalanche sizes.     

Reframing Pinterest: Information Literacy for Interior Design Students

This article discusses providing information literacy to interior design students, specifically how over a few years, and several assignment iterations, we moved from a more traditional one-shot library instruction session to a creative Association of College and Research Libraries Framework-inspired assignment using Pinterest as the medium for the students' professionally relevant research project. The outcome of our instruction relied on flexible assignment planning, collaboration as faculty and librarians changed roles, and a focus on information literacy skills needed by professional designers.     

High precision in-cylinder gas thermometry using Laser Induced Gratings: Quantitative measurement of evaporative cooling with gasoline/alcohol blends in a GDI optical engine

The first application of Laser Induced Thermal Gratings Spectroscopy (LITGS) for precision thermometry in a firing GDI optical engine is reported. Crank-angle resolved temperature values were derived from LITGS signals generated in fuel vapour with a pressure dependent precision in the range 0.1–1.0% allowing differences in evaporative or charge cooling effects arising from a variety of ethanol and methanol blends with a model gasoline fuel to be quantified. In addition, fluctuations in temperature arising from cyclic variations in compression were directly detected and measured.     

Virtual fencing technology to intensively graze lactating dairy cattle. II: Effects on cow welfare and behavior

Virtual fencing technology uses a neckband-mounted device to deliver an audio cue when an animal nears a virtual boundary that is set via a global positioning system, followed by an electrical stimulus if it crosses the boundary. The flexibility offered by this technology could revolutionize grazing management on dairy farms, but its application and effects on lactating dairy cattle have not been assessed. This experiment reports on the effects of an electric or a virtual front-fence on dairy cow behavior and welfare. Two temporally separated treatments were applied to a herd of 30 multiparous cows. Cows were provided an estimated 14 to 15 kg of dry matter/cow of fresh pasture in a new paddock every 24 h. From d 1 to 10 cows were grazed using a conventional electric front-fence (control treatment) and from d 14 to 23 they were grazed using a virtual front-fence (eShepherd, Agersens Pty Ltd.). Cows were trained to the technology from d 11 to 13. The milk production and live weight of individual cows were recorded daily. Cortisol concentrations were obtained from milk samples collected from individual cows on 3 d during each of the control and the virtual fence grazing periods, plus the first day of training. From d 6 of the experiment, 6 focal cows were fitted with a RumiWatch (Itin + Hoch GmbH) noseband sensor to monitor grazing and ruminating time, and 8 focal cows were fitted with an IceTag (IceRobotics Ltd.) sensors to monitor activity. Milk production, live weight, and the time cows spent standing and lying did not differ between the electric and virtual fence periods. Milk cortisol concentrations, activity, and the times spent ruminating and grazing were comparable between the electric and early virtual fence periods (i.e., d 1–3 with a virtual fence). However, at d 4 to 6 with a virtual fence, activity (steps taken and motion index) and time spent grazing were lower, and time spent ruminating was greater, compared with an electric fence. Further, least significant difference tests suggest milk cortisol concentrations were higher at d 5 with a virtual fence than at d 8 with an electric fence and d 1 with a virtual fence. We conclude there is no evidence of behavioral and welfare effects of virtual fencing on dairy cows in the days immediately following implementation of the technology in a simple intensive grazing regimen, but a longer study is required to fully elucidate effects beyond this period.     

Electrochemical Characterization of Isolated Nitrogenase Cofactors from Azotobacter vinelandii

The nitrogenase cofactors are structurally and functionally unique in biological chemistry. Despite a substantial amount of spectroscopic characterization of protein-bound and isolated nitrogenase cofactors, electrochemical characterization of these cofactors and their related species is far from complete. Herein we present voltammetric studies of three isolated nitrogenase cofactor species: the iron–molybdenum cofactor (M-cluster), iron–vanadium cofactor (V-cluster), and a homologue to the iron–iron cofactor (L-cluster). We observe two reductive events in the redox profiles of all three cofactors. Of the three, the V-cluster is the most reducing. The reduction potentials of the isolated cofactors are significantly more negative than previously measured values within the molybdenum–iron and vanadium–iron proteins. The outcome of this study provides insight into the importance of the heterometal identity, the overall ligation of the cluster, and the impact of the protein scaffolds on the overall electronic structures of the cofactors.     

After Digital Storytelling: Video Composing in the New Media Age

This paper considers the composing processes for novice moviemakers and the disciplinary, pedagogical, and epistemological ramifications of these by using two student case studies. The current model of video composing as a sequential series of temporally discrete steps, made famous by the Center for Digital Storytelling, is predicated on the logic of old media and, thus, may no longer be sufficient to account for the new media composing processes that emerge with new media interfaces. In place of a linear and sequential process of video composing, we suggest expanding the predominant model to account for a simultaneous, multiply-recursive process that involves the semiotic channels of image, sound, and word.     

Flexible film systems: Current understanding and future prospects

The electrical and mechanical properties of metal films on polymer Substrates are of interest for use inflexible electronic devices and sensors. In these Systems, film deformation mechanisms are comparable to those from free-standing films but the influence of the Substrate and the Interface on the film properties is yet to be fully understood. This understanding is critical to further design improvements and advanced in situ characterization holds the promise of making this possible. With the aid of such techniques direct Observation of failure and deformation mechanisms has become possible.     

The flotation of magnetic and non-magnetic pyrrhotite from selected nickel ore deposits

The non-stoichiometric sulfide mineral pyrrhotite (Fe_(1?x)S), common to many nickel ore deposits, occurs in different crystallographic forms and compositions. A series of pyrrhotite samples derived from Canada, South Africa and Botswana whose mineralogy is well characterised, were selected here in order to develop the relationship between mineralogy and flotation performance. Using both oxygen uptake and microflotation tests, the behaviour of the different pyrrhotite types was compared in terms of the effect of pH and collector addition. Non-magnetic pyrrhotite was less reactive in terms of its oxygen uptake and showed the best collectorless flotation recovery. Magnetic pyrrhotite was more reactive and showed poor collectorless flotation performance that could be improved with the addition of xanthate collector, but only if it was not already passivated. These differences are interpreted to be a result of pyrrhotite mineralogy. This has implications that may aid the manipulation of pyrrhotite flotation performance in processing operations.