Increased remineralization of tooth enamel by milk containing added casein phosphopeptide-amorphous calcium phosphate

Casein phosphopeptide amorphous calcium phosphate nano-complexes (CPP-ACP) in chewing gum, lozenges and mouthrinses have been shown to re-mineralize enamel subsurface lesions in human in situ experiments. The aim of this double-blind, randomized clinical study was to investigate the capacity of CPP-ACP added to bovine milk to re-mineralize enamel subsurface lesions in situ. Ten subjects drank milk containing either 2.0 or 5.0 g CPP-ACP/l or a control milk whilst wearing removable appliances with enamel slabs containing subsurface demineralized lesions. Each 200 ml milk sample was consumed once a day for each weekday over three consecutive weeks. After each treatment and one weeks rest the subjects crossed over to the other treatments. At the completion of the treatments the enamel slabs were removed and remineralization determined using microradiography and microdensitometry. The results demonstrated that all three milk samples re-mineralized enamel subsurface lesions. However, the milk samples containing CPP-ACP produced significantly greater remineralization than the control milk. The re-mineralizing effect of CPP-ACP in milk was dose-dependent with 2.0 and 5.0 g CPP-ACP/l producing an increase in mineral content of 70 and 148%, respectively, relative to the control milk. The differences in remineralization following exposure to the three milk samples were all statistically significant (P<0.001). In conclusion, this study shows that the addition of 2.0-5.0 g CPP-ACP/l to milk substantially increases its ability to re-mineralize enamel subsurface lesions.     

Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion

Experiments were conducted to evaluate the microstructural evolution in a commercial Al-0.6 % Mg-0.4 % Si alloy processed using high-pressure torsion for up to 20 turns. Disks of the alloy were tested in two different conditions: in a solution-treated condition and after a short aging treatment at 523 K. The results show that HPT processing introduces significant grain refinement through HPT processing including a reduction in grain size from ~150 μm to ~720 nm in 1 turn of HPT. The final grain size in this alloy was ~250 nm after 20 turns. Some tensile tests were conducted to evaluate the mechanical properties of the alloy at the solution treatment temperature. The results from these tests show that aging at 523 K leads to a small increase in ductility for all tensile samples with a maximum recorded elongation of ~230 %.     

A comparison of microstructures and mechanical properties in a Cu–Zr alloy processed using different SPD techniques

Experiments were conducted to evaluate the microstructures and mechanical properties of a Cu–0.1 % Zr alloy processed using two different techniques of severe plastic deformation: equal-channel angular pressing (ECAP) and high-pressure torsion (HPT). The samples were processed at room temperature through ECAP for eight passes or through HPT for 10 turns. The results show HPT is more effective both in refining the grains and in producing a large fraction of grain boundaries having high angles of misorientation. Both procedures produce reasonably homogeneous hardness distributions but the average hardness values were higher after HPT. In tensile testing at 673 K, the highest strength and ductility was achieved after processing by HPT. This is attributed to the grain stability and high fraction of high-angle grain boundaries produced in HPT.     

Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT

The high-temperature thermal stability of the ultrafine-grained (UFG) microstructures in low stacking fault energy silver was studied by differential scanning calorimetry (DSC). The UFG microstructures were achieved by equal-channel angular pressing (ECAP) and high-pressure torsion (HPT) at room temperature (RT). The defect structure in the as-processed samples was examined by electron microscopy and X-ray line profile analysis. The stored energy calculated from the defect densities was compared to the heat released during DSC. The sum of the energies stored in grain boundaries and dislocations in the ECAP-processed samples agreed with the heat released experimentally within the experimental error. The temperature of the DSC peak maximum decreased while the released heat increased with increasing numbers of ECAP passes. The released heat for the specimen processed by one revolution of HPT was much smaller than after 4–8 passes of ECAP despite the 2 times larger dislocation density measured by X-ray line profile analysis. This dichotomy was caused by the heterogeneous sandwich-like microstructure of the HPT-processed disk: about 175 μm wide surface layers on both sides of the disk exhibited a UFG microstructure while the internal part was recrystallized, thereby yielding a relatively small released heat.     

Controlled chain polymerisation and chemical soldering for single-molecule electronics

Single functional molecules offer great potential for the development of novel nanoelectronic devices with capabilities beyond today's silicon-based devices. To realise single-molecule electronics, the development of a viable method for connecting functional molecules to each other using single conductive polymer chains is required. The method of initiating chain polymerisation using the tip of a scanning tunnelling microscope (STM) is very useful for fabricating single conductive polymer chains at designated positions and thereby wiring single molecules. In this feature article, developments in the controlled chain polymerisation of diacetylene compounds and the properties of polydiacetylene chains are summarised. Recent studies of "chemical soldering", a technique enabling the covalent connection of single polydiacetylene chains to single functional molecules, are also introduced. This represents a key step in advancing the development of single-molecule electronics.     

Cytotoxic activity to acute myeloid leukemia cells by Antp-TPR hybrid peptide targeting Hsp90

We previously reported that Antp-TPR hybrid peptide inhibited the interaction of Hsp90 with TPR2A and had selective cytotoxic activity discriminating between normal and cancer cells to induce cancer cell death. In this study, we investigated the cytotoxic activity of Antp-TPR peptide toward acute myeloid leukemia (AML) cells. It was demonstrated that Antp-TPR peptide induced AML cell death in cell lines such as U937, K562, THP-1, and HL-60 via activation of caspases 3 and 7, and disruption of mitochondrial membrane potential. Conversely, Antp-TPR peptide did not reduce the viability of normal cells including peripheral blood mononuclear cells (PBMCs), although both geldanamycin and 17-AAG, small-molecule inhibitors of Hsp90, mediated cytotoxicity to these normal cells at low concentrations. In addition, mutation analysis of TPR peptide demonstrated that the highly conserved amino acids Lys and Arg were critical to the cytotoxic activity. These results indicated that Antp-TPR hybrid peptide would provide potent and selective therapeutic options in the treatment of AML.     

Inter-laboratory validation studies of biological method for determination of streptomycin in royal jelly

Inter-laboratory validation studies were conducted in 6 laboratories to validate the biological method for determination of streptomycin in royal jelly. Streptomycin spiked at the level of 0.2 and 1.0 ppm was analyzed. Mean recoveries were 89 and 96%, reproducibility relative standard deviations (RSD(R)) were 15.0 and 14.0%, HORRAT(R) values were 0.7 and 0.9. Samples containing residues at the levels of 0.25 and 0.80 ppm were analyzed. Mean recoveries were 113 and 99%, RSD(R) were 15.0 and 10.4%, and HORRAT(R) values were 0.8 and 0.6. The determination limit was 0.1 ppm. These results show that this method has good performance.     

Thermal and electrical conduction properties of vertically aligned carbon nanotubes produced by water-assisted chemical vapor deposition

We present both thermal and electrical conduction properties of vertically aligned carbon nanotubes (VACNTs), synthesized by the water-assisted chemical vapor deposition method using Fe–Ti–O nanoparticles as catalyst. Thermal diffusivity and electrical resistance of VACNTs have been measured by the laser flash method and direct-current four-terminal method, respectively. The VACNTs are found to have thermal diffusivities of the same order as isotropic graphite and the electrical characteristics of semiconductors. The electrical resistance shows a T^−1/4 temperature dependence, which implies that the conduction of electrons is dominated by 3D Mott variable range hopping.     

Candidate Biomarkers for Genetic and Clinicopathological Diagnosis of Endometrial Cancer

The recent increase in the frequency of endometrial cancer has emphasized the need for accurate diagnosis and improved treatment. The current diagnosis is still based on conventional pathological indicators, such as clinical stage, tumor differentiation, invasion depth and vascular invasion. However, the genetic mechanisms underlying endometrial cancer have gradually been determined, due to developments in molecular biology, leading to the possibility of new methods of diagnosis and treatment planning. New candidate biomarkers for endometrial cancer include those for molecular epigenetic mutations, such as microRNAs. These biomarkers may permit earlier detection of endometrial cancer and prediction of outcomes and are likely to contribute to future personalized therapy for endometrial cancer.