Enhanced antibacterial activity of tetramethylguanidinium-conjugated linear polyethylenimine polymers

In the present study, varying amounts of tetramethylguanidinium moiety have been conjugated to linear polyethylenimine to obtain linear polyethylenimine-tmg (LPTG) polymers. Incorporation of hydrophobic and highly basic moiety in the polymeric backbone resulted in the significant improvement in the antibacterial activity which was confirmed by zone of inhibition and MIC assays. Further, the results of transmission electron microscopy and confocal studies revealed that the projected LPTG polymers possessed higher antibacterial activity than the native polymer. In addition, these modified polyethylenimine (PEI) polymers were capable of reducing auric chloride into stable gold nanoparticles. These polyamine-stabilized gold nanoparticles can be used in various biomedical applications.     

Synthesis and characterization of exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposite via miniemulsion atom transfer radical polymerization: an activators generated by electron transfer approach

Exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposites were synthesized using activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP). Miniemulsion polymerization was used for its abundant advantages to encapsulate inorganic materials and eliminate organic solvents from products for environmentally friendly purposes. Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, which is an effective surfactant at higher temperatures, was used to stabilize the miniemulsion system. Successful miniemulsion AGET ATRP was carried out by using 4,4'‐dinonyl‐2,2'‐bipyridine (dNbPy) as a hydrophobic ligand. Formation of monodispersed droplets and particles with sizes in the range of 200nm was examined by dynamic light scattering (DLS). Conversion and molecular weight study were also carried out using gravimetry and gel permeation chromatography, respectively. By adding clay content, a decrease in the conversion and molecular weight of the nanocomposites are observed. However, an increase in the PDI values of nanocomposites was observed by the addition of nanoclay content. Thermogravimetric analysis results demonstrate that thermal stability of all the nanocomposites in comparison with the neat copolymer increases. Differential scanning calorimetry results show that T_g decreases by increasing clay content. Monodisperse distribution of spherical shape particles with sizes in the range of ∼ 200 nm was demonstrated by using scanning electron microscopy images of nanocomposite containing 1 wt% of nanoclay, which is more compiled with DLS results. Transmission electron microscopy results shows well‐dispersed exfoliated clay layers in the polymer matrix of PSMNM 1, which is coincidence with X‐ray diffraction data. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation of tailor‐made polystyrene nanocomposite with mixed clay‐anchored and free chains via atom transfer radical polymerization

Tailor‐made polystyrene nanocomposite with mixed free and clay‐attached polystyrene chains was synthesized using atom transfer radical polymerization. Vinylbenzyl trimethylammonium chloride having a double bond, which could be incorporated into polystyrene chains by a grafting through process, was used as a nanoclay modifier. Conversion and molecular weight evaluation was carried out using gas chromatography and gel permeation chromatography, respectively. The thermogravimetric analysis results confirmed the elevated thermal stability of the nanocomposites in comparison with the neat polystyrene sample. Additionally, the T_g increases by clay loading was confirmed by differential scanning calorimetry (DSC). The difference in the degradation temperature of C? Br bond in attached and free polystyrene chains was well revealed in DSC thermograms. Finally, a lower clay loading resulted in an exfoliated structure as proved by X‐ray diffraction and transmission electron microscopy results. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Efficient Synthesis of α-Monoglycerides via Solventless Condensation of Fatty Acids with Glycerol Carbonate

Highly pure α-monoglycerides (5a–e) were successfully prepared in high yields by the condensation of fatty acids such as lauric, myristic, palmitic, stearic and oleic (2a–e) with glycerol carbonate (4-hydroxymethyl-1,3-dioxolan-2-one) (1) in the presence of triethylamine as catalyst. Reaction conditions and spectroscopic identification of products will be presented in this article.     

Thin-film nanofiltration membrane with monomers of 1,2,4,5-benzene tetracarbonyl chloride and ethylene diamine on electrospun support: preparation,morphology and chlorine resistance properties

Polymer Bulletin - Novel polyimide nanofiltration membranes were prepared by interfacial polymerization using 1,2,4,5-benzene tetracarbonyl chloride (BTC) and trimesoyl chloride solution in...     

Synthesis and dissolution behavior of nanosized silicon and magnesium co-doped fluorapatite obtained by high energy ball milling

Nanosized hydroxyapatite (HA) powders exhibit a greater surface area than coarser crystals and are expected to show an improved bioactivity. In addition, properties of HA can be tailored over a wide range by incorporating different ions into HA lattice. The aim of this study was to prepare and characterize silicon and magnesium co-doped fluorapatite (Si–Mg–FA) with a chemical composition of Ca_9.5Mg_0.5 (PO₄)_5.5(SiO₄)_0.5F₂ by the high-energy ball milling method. Characterization techniques such as X-ray diffraction analysis (XRD), Fourier transformed infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM) were utilized to investigate the structural properties of the obtained powders. Dissolution behavior was evaluated in simulated body fluid (SBF) and physiological normal saline solution at 37 °C for up to 28 days. The results of XRD and FTIR showed that nanocrystalline single-phase Si–Mg–FA powders were synthesized after 12 h of milling. In addition, incorporation of magnesium and silicon into fluorapatite lattice decreased the crystallite size from 53 nm to 40 nm and increased the lattice strain from 0.220% to 0.296%. Dissolution studies revealed that Si–Mg–FA in comparison to fluorapatite (FA), releases more Ca, P and Mg ions into SBF during immersion. 175 ppm Ca, 33.5 ppm P and 48 ppm Mg were detected in the SBF containing Si–Mg–FA after 7days of immersion, while for FA, it was 75 ppm Ca, 21.5 ppm P and 29 ppm Mg. Release of these ions could improve the bioactivity of the obtained nanopowder. It could be concluded that the prepared nanopowders have structural properties such as crystallite size (~40 nm), crystallinity degree (~40%) and chemical composition similar to biological apatite. Therefore, prepared Si–Mg–FA nanopowders are expected to be appropriate candidates for bone substitution materials and also as a phase in polymer or ceramic-based composites for bone regeneration in tissue engineering applications.     

Kinetic study of styrene atom transfer radical polymerization from hydroxyl groups of graphene nanoplatelets: Heterogeneities in chains and graft densities

Confinement effect of graphene nanoplatelets on the kinetics of styrene atom transfer radical polymerization was studied by a “grafting from” reaction. Graphene oxide was modified by different amounts of (3‐aminopropyl) triethoxysilane and then alpha‐bromoisobutyryl bromide from the hydroxyl groups. Polymerization of styrene in the presence of modified graphene and free initiator, ethyl alpha‐bromoisobutyrate, was accomplished at 110°C. Then, effect of various graft densities and different graphene loadings on the heterogeneous graft and free polystyrene chains characteristics and also kinetics of polymerization was studied by gas and gel permeation chromatographies. Efficiency of grafting reactions along with the graft contents was studied by X‐ray photoelectron spectroscopy, elemental analysis, and thermogravimetric analysis. Confinement effects of graphene on the relaxation behavior of polystyrene chains and also morphology of the graphenes were studied by differential scanning calorimetry and transmission electron microscopy, respectively. POLYM. ENG. SCI., 55:1720–1732, 2015. © 2014 Society of Plastics Engineers