Investigation on the correlation between rheology and morphology of PA6/ABS blends using ethylene acrylate terpolymer as compatibilizer

Phase morphology and rheological behavior of polyamide 6 (PA6)/acrylonitrile butadiene styrene (ABS) polymers blends was studied using scanning electron microscopy and rheometry. The results showed that the phase morphology and rheological properties depends on blend composition. We evaluated the effect of addition of ABS as dispersed phase and EnBACO‐MAH (ethylene n‐butyl acrylate carbon monoxide maleic anhydride) as a compatibilizer on the morphological and rheological behaviors of PA6/ABS blends. It was concluded that there is a good agreement between the results obtained from rheological and morphological studies. As a consequence, addition of the ABS and compatibilizer weight percent led to a significant change in morphological structure and a great mounting in the viscosity as well as the elasticity. The rheological properties results demonstrate that adding compatibilizer to polymer blends led to increasing the crossover point, which shows a transition from a high viscous to a considerably more elastic behavior. Also, the slow transition of relaxation time peak from the peak of the PA6 to the peak of the ABS implies increasing the miscibility of the PA6/ABS blend components by increasing compatibilizer content. In addition, the Carreau–Yasuda model was used to extract information on rheological properties (zero shear viscosity and relaxation time) for PA6/ABS/EnBACO‐MAH blends by fitting the experimental data with this model. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pomegranate seed oil as a functional ingredient in beverages

Pomegranate seeds are by‐products of pomegranate juice industry. Since the seeds contain valuable oil that has nutritional and medicinal properties, they can be useful for food applications (especially in juice and beverage industries) as a functional agent. In this study, the possibility of producing a stable pomegranate‐seed‐oil‐in‐water emulsion to be used as a base formula for a new functional beverage was investigated. The influence of gum Arabic (GA) concentration (10.0, 12.5, and 15.0%, w/w) with a constant oil phase content (6.0% w/w) on the turbidity loss rate, emulsion stability index, and droplet size distribution was investigated. Turbidity loss rate was inversely proportional to the GA concentration for all the formulations studied here. Compared to other emulsions, emulsion with 15.0% w/w GA did not show a discernible cream layer during 42 days of storage. Emulsion with 15.0% w/w GA indicated the smallest polydispersity index during this period. The results of this study showed that it was possible to produce a relatively stable pomegranate‐seed‐oil‐in‐water emulsion for use as a functional agent in beverages.     

Indirect Synthesis of Bis(2‐PhInd)ZrCl2 Metallocene Catalyst,Kinetic Study and Modeling of Ethylene Polymerization

Bis(2‐phenylindenyl)zirconium dichloride (bis(2‐PhInd)ZrCl₂) catalyst was synthesized via the preparation of bis(2‐phenylindenyl)zirconium dimethyl (bis(2‐PhInd)ZrMe₂) followed by chlorination to obtain the catalyst. Performance of the catalyst for ethylene polymerization and its kinetic behavior were investigated. Activity of the catalyst increased as the [Al]:[Zr] molar ratio increased to 2333:1, followed by reduction at higher ratios. The maximum activity of the catalyst was obtained at a polymerization temperature of 60 °C. The rate‐time profile of the reaction was of a decay type under all conditions. A general kinetic scheme was modified by considering a reversible reaction of latent site formation, and used to predict dynamic polymerization rate and viscosity average molecular weight of the resulting polymer. Kinetic constants were estimated by the Nelder‐Mead numerical optimization algorithm. It was shown that any deviation from the general kinetic behavior can be captured by the addition of the reversible reaction of latent site formation. Simulation results were in satisfactory agreement with experimental data.     

Effects of reprocessing on the hygroscopic behavior of natural fiber high‐density polyethylene composites

Detailed analysis of the effects of recycling process on long‐term water absorption, thickness swelling, and water desorption behavior of natural fiber high‐density polyethylene composites is reported. Composite materials containing polyethylene and wood flour, rice hulls, or bagasse fibers and 2% compatibilizer were produced at constant fiber loading and were exposed to a simulated recycling process consisting of up to five times grinding and reprocessing under controlled conditions. A wide range of analytical methods including water absorption/desorption tests, thickness swelling tests, density measurement, scanning electron microscopy, image analysis, contact angle, fiber length analysis, Fourier transform infrared spectroscopy, and tensile tests were employed to understand the hygroscopic behavior of the recycled composites. Water absorption and thickness swelling behaviors were modeled using existing predictive models and a mathematical model was developed for water desorption at constant temperature. Results indicated that generally the recycled composites had considerably lower water absorption and thickness swellings as compared with the original composites which were attributed to changes in physical and chemical properties of the composites induced by the recycling process. Water desorption was found to be faster after recycling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The adsorption of malachite green (MG) as a cationic dye onto functionalized multi walled carbon nanotubes

Synthetic dyes are widely used by several industries to color their products. The discharge of colored wastewater into the hydrosphere causes serious environmental problems. We used functionalized multi wall carbon nanotubes as an adsorbent for the adsorption of cationic dye, malachite green, from aqueous solution. Based on information provided by the Iranian Research Institute of Petroleum Industry, carbon nanotubes are produced using a chemical vapor deposition (CVD) technique. These as-received MWCNTs were functionalized by acid treatment. The remaining dye concentration was read by UV-visible absorption spectroscopy at maximum adsorption wavelength. The effect of different operational parameters such as contact time, pH of solution, adsorbent dose and initial dye concentration were studied. The results showed that by increasing of contact time, pH and adsorbent dose the removal of dye increased, but by increasing initial dye concentration, the removal efficiency decreased. Adsorption isotherms and kinetics behavior of f-MWCNTs for removal of malachite green was analyzed, and fitted to various existing models. The experimental data were well correlated with the Langmuir isotherm with a maximum adsorption capacity (q _m ) and regression coefficient (R²) of 142.85 mg/g and 0.997, respectively. The results of this study indicate that functionalized multi wall carbon nanotubes can be used as an effective adsorbent for the removal of dyes.     

Accuracy enhancement of thermal dispersion model in prediction of convective heat transfer for nanofluids considering the effects of particle migration

A thermal dispersion model is utilized for simulation of convective heat transfer of water-TiO₂ nanofluid for laminar flow in circular tube. Concentration distribution at cross section of the tube was obtained considering the effects of particle migration, and this concentration distribution was applied in the numerical solution. Numerical solution was done at Reynolds numbers of 500 to 2000 and mean concentrations of 0.5 to 3%. Meanwhile, an experimental study was conducted to investigate the accuracy of the results obtained from the numerical solution. Non-uniformity of the concentration distribution increases with raising mean concentration and Reynolds number. Thereby, for mean concentration of 3%, at Reynolds numbers of 500 and 2000, the concentration from wall to center of the tube increases 2.6 and 30.9%, respectively. In the dispersion model, application of non-uniform concentration distribution improves the accuracy in prediction of the convective heat transfer coefficient in comparison with applying uniform concentration.     

Synthesis and characterization of modified ZSM-5 nanozeolite and their applications in adsorption of Acridine Orange dye from aqueous solution

In this research, a novel method was reported for the synthesis of ZSM-5 nanozeolite. The ZSM-5 nanozeolite was modified by transition metals such as nickel, copper and iron. These nanozeolites were characterized using X-ray diffraction, scanning electronic microscopy, Fourier transform infrared and Energy-dispersive X-ray techniques. The synthesized Fe-ZSM-5 nanozeolite has been smaller average particle size than the other nanozeolites. Adsorption behavior of Acridine Orange (AO) onto nanozeolites has been studied in an aqueous medium using UV–VIS technique. The modified nanozeolites have more adsorption efficiency compared to the unmodified ZSM-5 nanozeolite for AO removal. Also, Fe-ZSM-5 nanozeolite was shown higher adsorption efficiency of AO than the other synthesized nanozeolites. Adsorption isotherms were fitted with the Langmuir, Freundlich and D–R models. The kinetic data were investigated using pseudo-first order and pseudo-second order models. The adsorption kinetics of AO on Fe-ZSM-5 nanozeolitewell matched with pseudo-second order kinetic model.     

Microwave Synthesis and Characterization of Spinel-type Zinc Aluminate Nanoparticles

In the present work, ZnAl₂O₄ nanoparticles have been synthesized with the aid of Zn(OAc)₂·2H₂O and Al(NO₃)₃·9H₂O as starting reagents in the presence of microwave irradiation. Besides, the effect of preparation parameters such as microwave power and irradiation time on the morphology and particle size of products was studied by SEM images. The as-prepared ZnAl₂O₄ nanoparticles were characterized extensively by techniques like XRD, TEM, SEM, FT-IR, PL, and EDS. Photoluminescence studies of the ZnAl₂O₄ nanoparticles displayed quantum confinement behavior with band gap of 3.2 eV. The XRD studies showed that pure orthorhombic ZnAl₂O₄ nanoparticles have been produced after calcination.     

Kinetic modeling and optimization of the operating condition of MTO process on SAPO-34 catalyst

In this paper, a new kinetic model for methanol to olefin process (MTO) over SAPO-34 catalyst was developed based on data obtained from a micro catalytic reactor using appropriate reaction network. The reaction rate equation has been introduced with consideration of reaction mechanism and the parameters were optimized on the experimental data by genetic algorithm. Comparing the experimental and predicted data showed that the predicted values from the presented model are well fitted to the experimental data. Using this kinetic model, the effect of most important operating conditions such as temperature, pressure, inlet water to methanol molar ratio and methanol space–time on the product distribution, has been examined. Finally, the optimal operating conditions for maximum production of the ethylene and the propylene were introduced.