Control of Hybrid Active Power Filter Based on Switching Function Coefficients

A pulse width modulation (PWM)-based control method for a three-level, four-wire neutral point clamped (NPC) inverter employed in a hybrid active power filter (HAPF) is proposed in this paper. The control method is based on switching function coefficients (SFCs) for harmonic compensation. An interior loop is also proposed for control and balancing of the DC-link voltages. In the proposed control system, one carrier signal is employed in the PWM unit in order to simplify its hardware as compared with traditional PWMs. Based on Fourier decomposition technique, mathematical analysis of the proposed control method is also presented. To decrease the NPC inverter rated power, passive power filters (PPFs) are designed to eliminate fifth and seventh order harmonic currents and to compensate source reactive currents. The proposed control system is implemented by a digital signal processing (DSP) in a laboratory prototype. The experimental results confirmed the validity of the proposed control method in compensation of harmonic currents under non-linear conditions     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.     

Seismic design of special moment‐resisting steel frame with prevention of soft‐storey mechanism failure

Most structures with masonry infills that are continuous along their height, which are interrupted in the lowest storey, are damaged by earthquakes. These structures are anticipated to collapse due to the undesirable soft‐storey mechanism formed by lateral stiffness of masonry infills in other storeys. The seismic design criteria of UBC97 code for special moment‐resisting steel frame (SMRSF) are reviewed. In this paper, a new criterion for seismic design of such structures is presented. The proposed criteria are used to design three SMRSFs: 5, 8 and 15 storeys. Nonlinear time‐history dynamic analyses are applied for the designed SMRSFs based on the proposed criteria. Displacements and storey drifts, which are obtained by the proposed method, are compared with nonlinear time‐history dynamic analysis results, finally. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and architecture study of a reactive polybutadiene polyamine as a toughening agent for epoxy resin

In this study, a novel reactive toughener for the epoxy resin was developed and compared with traditional hydroxyl‐terminated polybutadiene (HTPB). For this purpose, the highly reactive aliphatic amine‐terminated polybutadiene (ATPB) was synthesized at ambient conditions by nucleophilic substitution amination. The characterizations of the product were provided by Fourier transform infrared and ¹H NMR spectroscopy. According to the mechanical test results, incorporation of ATPB into epoxy networks can significantly toughen the epoxy matrix. The addition of 10 phr ATPB increased the critical stress intensity factor (K_IC) and critical strain energy release rate (G_IC) of the epoxy from 0.85 to 2.16 MPa m^1/2 and from 0.38 to 3.02 kJ m^?2, respectively. Furthermore, unlike HTPB, the presence of the ATPB did not deteriorate the tensile strength of the matrix. The toughening and failure mechanisms were discussed based on the epoxy network morphological characteristics. The reduction in cross‐linking density and glass transition temperature of the epoxy system upon modification with liquid rubbers was confirmed by dynamic mechanical analysis. This article opens up the possibility of utilizing reactive flexible diamines with polybutadiene backbone as effective toughening agents for thermoset polymers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44061.     

Hydrodynamics of pulsed spouted beds: Effects of pulsation waveform,amplitude, and frequency

The effect of flow pulsations is studied via a discrete element model on hydrodynamics of spouted bed, which is being used in many important industries like drying processes. Decreased horizontal air percolation and preserving upward momentum, increased particle circulation, increased particle traverse distance, and better homogeneity are resulted from flow pulsations in spouted beds. Among the waveforms studied, square and triangular waveforms differ most and least from steady spouting, respectively. The predictions indicate that the pulsed spouted bed has the potential to enhance both gas and particle motion, hence being useful in drying and other operations.     

Study of inhibition effect of carboxylic salt derivative on corrosion of C1010 carbon steel in saline solution

In the present work, sodium 4-[(4-formylbenzylidene) amino] benzoiate (4) was synthesized and its structure was confirmed using spectroscopic techniques. Prepared compound was successfully applied as a corrosion inhibitor for C1010 carbon steel in 3.5% NaCl solution at 25°C. Different electrochemical measurements such as linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) were used to evaluate the suggested inhibitor (4). The results of different electrochemical measurements show that inhibition efficiencies obtained from EIS curves are in consistence with the results of potentiodynamic polarization and LPR measurements due to increase corrosion inhibition efficiency by increasing the concentration of organic inhibitor (4). Semi-empirical calculations with PM3 method were used to find relationship between molecular structure and inhibiting effect of suggested inhibitor (4).