Fluid Flow and Mixing in Non-Isothermal Water Model of Continuous Casting Tundish

Fluid flow and mixing of molten steel in a twin-slab-strand continuous casting tundish were investigated using a mixing model under non-isothermal conditions.This model led to a set of ordinary differential equations that were solved with a Runge-Kutta algorithm.Steady state water modeling was carried out under non-isothermal conditions.Experimental data obtained from the water model were used to calibrate the mixing model.Owing to the presence of a mixed convection in the non-isothermal conditions,a channelizing flow would be created in the fluid inside the tundish.A mixing model was designed that was capable of predicting RTD（residence time distribution）curves for different cases in non-isothermal conditions.The relationship between RTD parameters and the Tu（tundish Richardson number）was obtained for various cases under non-isothermal conditions.The results show that the RTD parameters were completely different under isothermal and non-isothermal conditions.The comparison of the RTD curves between the isothermal and non-isothermal conditions presents that the extent of mixing in the tundish in non-isothermal conditions is lower than the mixing extent in isothermal conditions.     

辊速差对连铸连轧7075铝板显微组织、 织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响.采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验.结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5％和21.9％.此外,当辊...     

Camelid Single-Domain Antibodies: Promises and Challenges as Lifesaving Treatments

Since the discovery of camelid heavy-chain antibodies in 1993, there has been tremendous excitement for these antibody domains (VHHs/sdAbs/nanobodies) as research tools, diagnostics, and therapeutics. Commercially, several patents were granted to pioneering research groups in Belgium and the Netherlands between 1996–2001. Ablynx was established in 2001 with the aim of exploring the therapeutic applications and development of nanobody drugs. Extensive efforts over two decades at Ablynx led to the first approved nanobody drug, caplacizumab (Cablivi) by the EMA and FDA (2018–2019) for the treatment of rare blood clotting disorders in adults with acquired thrombotic thrombocytopenic purpura (TPP). The relatively long development time between camelid sdAb discovery and their entry into the market reflects the novelty of the approach, together with intellectual property restrictions and freedom-to-operate issues. The approval of the first sdAb drug, together with the expiration of key patents, may open a new horizon for the emergence of camelid sdAbs as mainstream biotherapeutics in the years to come. It remains to be seen if nanobody-based drugs will be cheaper than traditional antibodies. In this review, I provide critical perspectives on camelid sdAbs and present the promises and challenges to their widespread adoption as diagnostic and therapeutic agents.     

Control of Hybrid Active Power Filter Based on Switching Function Coefficients

A pulse width modulation (PWM)-based control method for a three-level, four-wire neutral point clamped (NPC) inverter employed in a hybrid active power filter (HAPF) is proposed in this paper. The control method is based on switching function coefficients (SFCs) for harmonic compensation. An interior loop is also proposed for control and balancing of the DC-link voltages. In the proposed control system, one carrier signal is employed in the PWM unit in order to simplify its hardware as compared with traditional PWMs. Based on Fourier decomposition technique, mathematical analysis of the proposed control method is also presented. To decrease the NPC inverter rated power, passive power filters (PPFs) are designed to eliminate fifth and seventh order harmonic currents and to compensate source reactive currents. The proposed control system is implemented by a digital signal processing (DSP) in a laboratory prototype. The experimental results confirmed the validity of the proposed control method in compensation of harmonic currents under non-linear conditions     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.     

Synthesis and architecture study of a reactive polybutadiene polyamine as a toughening agent for epoxy resin

In this study, a novel reactive toughener for the epoxy resin was developed and compared with traditional hydroxyl‐terminated polybutadiene (HTPB). For this purpose, the highly reactive aliphatic amine‐terminated polybutadiene (ATPB) was synthesized at ambient conditions by nucleophilic substitution amination. The characterizations of the product were provided by Fourier transform infrared and ¹H NMR spectroscopy. According to the mechanical test results, incorporation of ATPB into epoxy networks can significantly toughen the epoxy matrix. The addition of 10 phr ATPB increased the critical stress intensity factor (K_IC) and critical strain energy release rate (G_IC) of the epoxy from 0.85 to 2.16 MPa m^1/2 and from 0.38 to 3.02 kJ m^?2, respectively. Furthermore, unlike HTPB, the presence of the ATPB did not deteriorate the tensile strength of the matrix. The toughening and failure mechanisms were discussed based on the epoxy network morphological characteristics. The reduction in cross‐linking density and glass transition temperature of the epoxy system upon modification with liquid rubbers was confirmed by dynamic mechanical analysis. This article opens up the possibility of utilizing reactive flexible diamines with polybutadiene backbone as effective toughening agents for thermoset polymers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44061.     

Study of inhibition effect of carboxylic salt derivative on corrosion of C1010 carbon steel in saline solution

In the present work, sodium 4-[(4-formylbenzylidene) amino] benzoiate (4) was synthesized and its structure was confirmed using spectroscopic techniques. Prepared compound was successfully applied as a corrosion inhibitor for C1010 carbon steel in 3.5% NaCl solution at 25°C. Different electrochemical measurements such as linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) were used to evaluate the suggested inhibitor (4). The results of different electrochemical measurements show that inhibition efficiencies obtained from EIS curves are in consistence with the results of potentiodynamic polarization and LPR measurements due to increase corrosion inhibition efficiency by increasing the concentration of organic inhibitor (4). Semi-empirical calculations with PM3 method were used to find relationship between molecular structure and inhibiting effect of suggested inhibitor (4).     

Protein Kinases and Parkinson’s Disease

Currently, the lack of new drug candidates for the treatment of major neurological disorders such as Parkinson’s disease has intensified the search for drugs that can be repurposed or repositioned for such treatment. Typically, the search focuses on drugs that have been approved and are used clinically for other indications. Kinase inhibitors represent a family of popular molecules for the treatment and prevention of various cancers, and have emerged as strong candidates for such repurposing because numerous serine/threonine and tyrosine kinases have been implicated in the pathobiology of Parkinson’s disease. This review focuses on various kinase-dependent pathways associated with the expression of Parkinson’s disease pathology, and evaluates how inhibitors of these pathways might play a major role as effective therapeutic molecules.