Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods. 相似文献
Dedicated short-range communications (DSRC) is an important wireless technology for current and future automotive safety and mitigation of traffic jams. In this work, we have designed a Coplanar waveguide microstrip patch antenna with linear, upper and bottom and side slots for application in DSRC. The patch antenna was designed using glass epoxy substrate (FR4). Various parametric analyses such as the current distribution, reflection coefficient, radiation pattern on E- and H-plane as well as the realized gain (dB) were performed. The results were obtained by simulation using high-frequency structure simulator tool. The proposed antenna covers a frequency band of 5.8–5.9 GHz which is highly dedicated to the DSRC wireless communication technology for enhancement of safety of the automotive transport system. The designed antenna shows a good return loss of ??19 dB at 5.9 GHz.The designed antenna shows a promising gain, return loss and radiation pattern for use in DSRC for automotive transport systems.
The problem of an elastic beam under the periodic loading of successive moving masses is investigated as a pragmatic case for studying dynamic stability of linear time-varying systems. This model serves to highlight the odds of multi-solutions coexistence, a form of hidden instability which reveals dangerous as it may be precipitated by the slightest disturbance or variation in the model. Since no engineering model perfectly represents a physical system, such situations for which Floquet theory naively predicts stability are potentially inevitable. The harmonic balancing method is used in order to thoroughly explore the stability diagrams for detecting these instability gaps. Although this phenomenon has also been described in other physical systems, it has not been addressed for beam–moving mass systems. This result may find particular importance in applications involving self-induced vibrations of elastic structures and hence also appears of practical relevance. 相似文献
Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL4 isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se相似文献
There is a growing interest in the development of microelectronics that can perform reliably and robustly at temperatures above 300 °C. Such devices require stable thermal properties, low thermal drift, and thermal cycling resistance. Conventional hybrid circuit technology demonstrates high-temperature packages, but the high costs and lead time are significant drawbacks. In contrast, additive manufacturing processes, including aerosol jet printing (AJP), offer cost and time benefits, as well as 3D structures and embedded features. However, the properties and reliability of additive packaging materials at extreme temperatures are not well known. Herein, the reliability at temperatures up to 750 °C in terms of electrical performance and mechanical strength of aerosol jet printed gold thick films onto ceramic substrates are assessed. Thermal coefficient of resistance of printed gold films is measured. The electrical resistance stability and leakage current of printed gold structures are also characterized during over 100 h of aging at temperatures up to 750 °C. Finally, the mechanical adhesion strength of the printed gold films is evaluated after aging for 100 h at temperatures up to 750 °C. The adhesion of the printed gold to the ceramic substrates remains high after aging, very stable resistances and minimal leakage currents have been observed. 相似文献
We propose a compact split-step finite difference method to solve the nonlinear Schrödinger equations with constant and variable coefficients. This method improves the accuracy of split-step finite difference method by introducing a compact scheme for discretization of space variable while this improvement does not reduce the stability range and does not increase the computational cost. This method also preserves some conservation laws. Numerical tests are presented to confirm the theoretical results for the new numerical method by using the cubic nonlinear Schrödinger equation with constant and variable coefficients and Gross-Pitaevskii equation. 相似文献
This paper introduces an analytical method for approximating the performance of a firm real-time system consisting of a number of parallel infinite-capacity single-server queues. The service discipline for the individual queues is earliest-deadline-first (EDF). Real-time jobs with exponentially distributed relative deadlines arrive according to a Poisson process. Jobs either all have deadlines until the beginning of service or deadlines until the end of service. Upon arrival, a job joins a queue according to a state-dependent stationary policy, where the state of the system is the number of jobs in each queue. Migration among the queues is not allowed. An important performance measure to consider is the overall loss probability of the system. The system is approximated by a Markovian model in the long run. The resulting model can then be solved analytically using standard Markovian solution techniques. Comparing numerical and simulation results for at least three different stationary policies, we find that the existing errors are relatively small. 相似文献