Multiobjective optimal placement of active tendons to control irregular multistory buildings with soil–structure interaction

In recent decades, many researchers have conducted research studies on structural control to improve the safety and serviceability of high‐rise buildings against earthquakes and strong winds. On the other hand, applying active control systems and controlling strategies in buildings are costly process, and it is necessary to reduce the number of controllers. In this paper, a multiobjective genetic algorithm is proposed to optimize the placement of active tendons in a 2D shear frame and a 3D irregular building considering soil–structure interaction effect to reduce active control cost and response of structures at the same time. For multiobjective optimization, multiobjective genetic algorithm of the MATLAB toolbox is used to find a set of Pareto optimal solutions for a multiobjective minimization. The results indicate that the method is capable of finding the number and location of the required active tendons in both 2D shear frame and 3D irregular building with 10 and 20 stories while the base shear of structure is minimized. The specific advantage of the employed algorithms is to reduce the number of mounted active tendons approximately by 50%.     

Thermochemical,Sensitivity and Detonation Characteristics of New Thermally Stable High Performance Explosives

The M06‐2X/6‐311G(d,p) and B3LYP/6‐311G(d,p) density functional methods and electrostatic potential analysis were used for calculation of enthalpy of sublimation, crystal density and enthalpy of formation of some thermally stable explosives in the gas and solid phases. These data were used for prediction of their detonation properties including heat of detonation, detonation pressure, detonation velocity, detonation temperature, electric spark sensitivity, impact sensitivity and deflagration temperature using appropriate methods. The range of different properties for these compounds are: crystal density 1.51–2.01 g cm⁻³, enthalpy of sublimation 346.4–424.7 kJ mol⁻¹, the solid phase enthalpy of formation 500.4–860.6 kJ mol⁻¹, heat of detonation 13.64–17.57 kJ g⁻¹, detonation pressure 33.0–37.0 GPa, detonation velocity 8.5–9.5 km s⁻¹, detonation temperature 5488–6234 K, electric spark sensitivity 7.89–9.47 J, impact sensitivity 21–38 J, deflagration temperature 560–586 K and power [%TNT] 207–276. The results show that two novel energetic compounds N,N′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(5‐nitro‐4H‐1,2,4‐triazol‐3‐amine) (DDTNPNT3A) and 1,1′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(3‐nitro‐1H‐1,2,4‐triazol‐5‐amine) (DDTNPNT5A) can be introduced as thermally explosives with high detonation performance.     

Hydrogeochemistry and Contamination of Trace Elements in Cu-Porphyry Mine Tailings: A Case Study from the Sarcheshmeh Mine,SE Iran

Geochemical and hydrochemical investigations were performed to understand the contamination potential of the Sarcheshmeh mine tailings. The geochemical mobility for the tailings is as follows: Cu > Cd > Co > Zn > Ni > Mn > S > Cr > Sn > As > Se > Fe = Bi > Sb = Pb = Mo. Highly mobile and contaminant elements (Cd, Cu, Zn, Mn, Co, Ni, S, and Cr), which significantly correlated with each other, were mainly concentrated in the surface evaporative layer of the old, weathered tailings, due to the high evaporation rate, which causes subsurface water to migrate upward via capillary action. The contamination potential associated with the tailings is controlled by: (1) dissolution of secondary evaporative soluble phases, especially after rainfall on the old weathered tailings, accompanied by low pH and high contamination loads of Al, Cd, Co, Mg, Cr, Cu, Mn, Ni, S, Se, and Zn; (2) processing of the Cu-porphyry ore under alkaline conditions, which is responsible for the high Mo (mean of 2.55 mg/L) and very low values of other contaminants in fresh tailings in the decantation pond; (3) low mobility of As, Fe, Pb, Sb, Mo, and Sn due to natural adsorption and co-precipitation in the tailings oxidizing zone. Speciation modeling showed that sulfate complexes (MSO₄ ⁺, M(SO₄)_(aq), M(SO₄) ₂ ^?2 , and M(SO₄) ₂ ^? ) and free metal species (M⁺² and M⁺³) are the dominant forms of dissolved cations in the acidic waters associated with the weathered tailings. In the alkaline and highly alkaline waters, trace element speciation was controlled by various hydroxide complexes, such as M(OH)⁺, M(OH) ₃ ^? , M₃(OH) ₄ ⁺² , M₂(OH) ₃ ⁺ , M(OH)_2(aq), M(OH) ₄ ^?2 , Me(OH) ₂ ⁺ , Me(OH) ₄ ^? , Me(OH) ₂ ⁺ , Me(OH)_3(aq), and Me(OH) ₄ ^? (where M represents bivalent and Me represents trivalent cations). The speciation pattern of As, Mo, and Se is mainly dominated by oxy-anion forms. The obtained results can be used as a basis for environmental management of the Cu-porphyry mine tailings.     

Immersed boundary method for the simulation of heat transfer and fluid flow based on vorticity–velocity formulation

ABSTRACT

The present paper, based on the vorticity–velocity formulation of the Navier–Stokes equations, proposes an immersed boundary method for the simulation of heat transfer problems within a geometrically complex domain. The desired boundary conditions are imposed by the direct modification of the initial conditions of vorticity transport and energy equations using smooth interpolations. The time advancement of both transport equations is performed by the explicit fourth-order Runge–Kutta method. One of the main objectives of this paper is to present global smooth interpolations to evaluate the local Nusselt number. The forced convection of moving and fixed circular cylinders, natural convection problem in complex geometries, and the mixed convection between two concentric cylinders—at various Reynolds numbers—are studied.     

A Review of Heat Transfer and Pressure Drop Correlations for Laminar Flow in Curved Circular Ducts

Heat transfer and pressure drop correlations for fully developed laminar Newtonian fluid flow in curved and coiled circular tubes are reviewed. Curved geometry is one of the passive heat transfer enhancement methods that fits several heat transfer applications, such as power production, chemical and food industries, electronics, environment engineering, and so on. Centrifugal force generates a pair or two pairs of cross-sectional secondary flow (based on the Dean number), which are known as the Dean vortices, and improves the overall heat transfer performance with an amplified peripheral Nusselt number variation. The main purpose of this review paper is to provide researchers with a comprehensive list of correlations and concepts that they may need during their research. The paper begins with an introduction to the governing equations and important dimensionless numbers for the flow in curved tubes. The correlations for developing flow in curved and coiled circular tubes are also presented. The main contribution of this study is reviewing the numerical and experimental correlations to calculate friction factor and Nusselt number in curved circular tubes. Nusselt number correlations are categorized based on the thermal boundary condition, as well as on the method. A Dean number range of 1 to 20,000 for the pressure drop correlations and 1 to 7000 for the heat transfer correlations and a Prandtl number range of 0.1 to 7,000 are covered with the reviewed correlations.     

A Numerical Study on Natural Convention Heat Transfer From a Horizontal Isothermal Cylinder Located Underneath an Adiabatic Ceiling

A numerical analysis is performed for steady-state and two-dimensional natural convection heat transfer from a horizontal isothermal cylinder located underneath a horizontal adiabatic ceiling. The finite-volume method based on the SIMPLE algorithm and a nonorthogonal grid discretization scheme are used to solve the continuity, momentum, and energy equations for the Rayleigh numbers in the range from 10^?1 to 10⁴. The Poisson equations are solved to find the grid points, which are distributed in a nonuniform manner with higher concentration close to the solid regions. In addition, the HYBRID differencing scheme is used for the approximation of the convective terms in the curvilinear coordinate. The effects of the Rayleigh numbers and cylinder spacing from the adiabatic ceiling on both the local and average Nusselt numbers around the cylinder are investigated. Numerical results are performed for the plate-to-cylinder spacing ranging from 0.1 to 1.4.     

A branch-and-bound algorithm for minimizing the sum of maximum earliness and tardiness with unequal release times

This article addresses the problem of minimizing the sum of maximum earliness and tardiness on a single machine with unequal release times. It is proven that this problem is NP-hard in the strong sense and a branch-and-bound algorithm is developed as an exact method. In the proposed algorithm, modified dispatching rules based on different release times are proposed as the upper bound, while a procedure considering preemption assumption is used to obtain a good lower bound. Also, dominance rules based on no unforced idle time, adjacent pairwise interchanges in the base problem, and job blocks are used to fathom the nodes. In order to evaluate the efficiency of the proposed algorithm, 4,860 instances were randomly generated, varying from 7 to 1,000 jobs. It is shown that the branch-and-bound algorithm was capable of optimally solving 94.1% of the instances, showing its efficiency in solving all problem sizes.     

Biological evaluation of polyvinyl alcohol hydrogel crosslinked by polyurethane chain for cartilage tissue engineering in rabbit model

Polyvinyl alcohol (PVA) hydrogel chains were crosslinked by urethane pre-polymer (PPU) in order to fabricate a new substitute for cartilage lesions. The microscopy images showed that the cultured chondrocytes had spherical morphology on PVA–PPU sample after 4 weeks of isolation in vitro. The alcian blue and safranin O staining proved the presence of proteoglycan on the surface of PVA–PPU sample secreted by cultured chondrocytes. This was confirmed by the detection of sulfate ions in the wavelength dispersive X-ray (WDX) analysis. In addition, the expression of collagen type II and aggrecan were observed in chondrocytes cultured on PVA–PPU by RT-PCR. Moreover, the implantation of the PVA–PPU sample with autologous cultured chondrocytes revealed the formation of neocartilage tissue in a rabbit model during 12 weeks follow up. In conclusion, the results verified that isolated chondrocytes cultured on PVA–PPU retain their original phenotype and this composition can be considered as promising substrate for cartilage tissue engineering.     

Off-Line Detection of Multiple Change Points by the Filtered Derivative with p-Value Method

Abstract

This article deals with off-line detection of change points, for time series of independent observations, when the number of change points is unknown. We propose a sequential analysis method with linear time and memory complexity. Our method is based, on a filtered derivative method that detects the right change points as well as false ones. We improve the filtered derivative method by adding a second step in which we compute the p-values associated to every single potential change point. Then, we eliminate false alarms; that is, the change points that have p-values smaller than a given critical level. Next, we apply our method and penalized least squares criterion procedure to detect change points on simulated data sets and then we compare them. Eventually, we apply the filtered derivative with p-value method to the segmentation of heartbeat time series, and the detection of change points in the average daily volume of financial time series.     

A Fast Adaptive Salt and Pepper Noise Reduction Method in Images

In this paper, an effective filtering method is proposed to remove impulse noise from images. In this two-stage method, detected noise-free pixels remain unchanged. Afterwards, a Gaussian filter with adaptive variances according to the image noise level is applied on the noisy pixels. Experimental results show that the proposed method outperforms recent impulse denoising methods in terms of PSNR, MAE, IEF, and SSIM. Moreover, the speed of the method is comparable with them, and it can be used effectively in real-time applications.