Dynamic behavior of particles across flame propagation through micro-iron dust cloud with thermal radiation effect

In this investigation, a theoretical study is performed to analyze the dynamic behavior of particles across flame propagation through a two-phase mixture consisting of micro-iron particles and air. In the first step for calculation of the particle velocity profile, the Lagrangian approach of particle motion is employed, and then thermophoretic, gravitational and buoyancy forces are taken into consideration. In order to simulate the temperature profile for the thermophoretic force, it is assumed that the flame structure consists of three zones: preheat, reaction, and post flame (burned). It should be noted that the radiative heat-transfer equation is employed to describe the thermal radiation exchanged between the burned zone and the preheat zone. In the resumption, a control volume above the leading edge of the combustion zone is considered and the change in the particle number density in this volume is obtained via the balance of particle mass fluxes passing through it. The results show that the induced thermal radiation plays a significant role in increasing the mixture temperature all over the preheat zone, and that the particle velocity profile and the concentration distribution of particles as a function of distance from the leading edge of the combustion zone also have considerable consistency with published experimental data.     

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Today's strict environmental laws pose significant challenges for coating's formulators to look for eco-friendly products. Powder coatings, particularly polyester/epoxy blends have demonstrated their ability as alternatives to traditional solvent-borne coatings. Recently, the use of nanoparticles such as nano-CaCO₃ (nCaCO₃) has been suggested as a beneficial strategy towards powder coating application with improved properties. Here, we study the effect of nCaCO₃ on morphology, cure behavior, adhesion and hardness of polyester/epoxy systems. The nanoparticles shape, size and dispersion state were investigated through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. Furthermore, isothermal cure characterization of the neat and filled systems was performed using a torque rheometer. The most important finding based on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of polyester/epoxy, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, pull-off adhesion and hardness tests showed that the hardness and adhesion strength were dramatically increased by the addition of nCaCO₃ into the polyester/epoxy system compared to pure blend resin. Therefore, considering the strong competition in powder coating market, the use of nCaCO₃ as a commercial and inexpensive nanofiller is necessary not only to reduce the dwell time which has benefits in terms of the energy consumption and economics, but also to improve the performance of final polyester/epoxy coating.     

Investigation on the correlation between rheology and morphology of PA6/ABS blends using ethylene acrylate terpolymer as compatibilizer

Phase morphology and rheological behavior of polyamide 6 (PA6)/acrylonitrile butadiene styrene (ABS) polymers blends was studied using scanning electron microscopy and rheometry. The results showed that the phase morphology and rheological properties depends on blend composition. We evaluated the effect of addition of ABS as dispersed phase and EnBACO‐MAH (ethylene n‐butyl acrylate carbon monoxide maleic anhydride) as a compatibilizer on the morphological and rheological behaviors of PA6/ABS blends. It was concluded that there is a good agreement between the results obtained from rheological and morphological studies. As a consequence, addition of the ABS and compatibilizer weight percent led to a significant change in morphological structure and a great mounting in the viscosity as well as the elasticity. The rheological properties results demonstrate that adding compatibilizer to polymer blends led to increasing the crossover point, which shows a transition from a high viscous to a considerably more elastic behavior. Also, the slow transition of relaxation time peak from the peak of the PA6 to the peak of the ABS implies increasing the miscibility of the PA6/ABS blend components by increasing compatibilizer content. In addition, the Carreau–Yasuda model was used to extract information on rheological properties (zero shear viscosity and relaxation time) for PA6/ABS/EnBACO‐MAH blends by fitting the experimental data with this model. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pomegranate seed oil as a functional ingredient in beverages

Pomegranate seeds are by‐products of pomegranate juice industry. Since the seeds contain valuable oil that has nutritional and medicinal properties, they can be useful for food applications (especially in juice and beverage industries) as a functional agent. In this study, the possibility of producing a stable pomegranate‐seed‐oil‐in‐water emulsion to be used as a base formula for a new functional beverage was investigated. The influence of gum Arabic (GA) concentration (10.0, 12.5, and 15.0%, w/w) with a constant oil phase content (6.0% w/w) on the turbidity loss rate, emulsion stability index, and droplet size distribution was investigated. Turbidity loss rate was inversely proportional to the GA concentration for all the formulations studied here. Compared to other emulsions, emulsion with 15.0% w/w GA did not show a discernible cream layer during 42 days of storage. Emulsion with 15.0% w/w GA indicated the smallest polydispersity index during this period. The results of this study showed that it was possible to produce a relatively stable pomegranate‐seed‐oil‐in‐water emulsion for use as a functional agent in beverages.     

Effects of reprocessing on the hygroscopic behavior of natural fiber high‐density polyethylene composites

Detailed analysis of the effects of recycling process on long‐term water absorption, thickness swelling, and water desorption behavior of natural fiber high‐density polyethylene composites is reported. Composite materials containing polyethylene and wood flour, rice hulls, or bagasse fibers and 2% compatibilizer were produced at constant fiber loading and were exposed to a simulated recycling process consisting of up to five times grinding and reprocessing under controlled conditions. A wide range of analytical methods including water absorption/desorption tests, thickness swelling tests, density measurement, scanning electron microscopy, image analysis, contact angle, fiber length analysis, Fourier transform infrared spectroscopy, and tensile tests were employed to understand the hygroscopic behavior of the recycled composites. Water absorption and thickness swelling behaviors were modeled using existing predictive models and a mathematical model was developed for water desorption at constant temperature. Results indicated that generally the recycled composites had considerably lower water absorption and thickness swellings as compared with the original composites which were attributed to changes in physical and chemical properties of the composites induced by the recycling process. Water desorption was found to be faster after recycling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The adsorption of malachite green (MG) as a cationic dye onto functionalized multi walled carbon nanotubes

Synthetic dyes are widely used by several industries to color their products. The discharge of colored wastewater into the hydrosphere causes serious environmental problems. We used functionalized multi wall carbon nanotubes as an adsorbent for the adsorption of cationic dye, malachite green, from aqueous solution. Based on information provided by the Iranian Research Institute of Petroleum Industry, carbon nanotubes are produced using a chemical vapor deposition (CVD) technique. These as-received MWCNTs were functionalized by acid treatment. The remaining dye concentration was read by UV-visible absorption spectroscopy at maximum adsorption wavelength. The effect of different operational parameters such as contact time, pH of solution, adsorbent dose and initial dye concentration were studied. The results showed that by increasing of contact time, pH and adsorbent dose the removal of dye increased, but by increasing initial dye concentration, the removal efficiency decreased. Adsorption isotherms and kinetics behavior of f-MWCNTs for removal of malachite green was analyzed, and fitted to various existing models. The experimental data were well correlated with the Langmuir isotherm with a maximum adsorption capacity (q _m ) and regression coefficient (R²) of 142.85 mg/g and 0.997, respectively. The results of this study indicate that functionalized multi wall carbon nanotubes can be used as an effective adsorbent for the removal of dyes.     

Accuracy enhancement of thermal dispersion model in prediction of convective heat transfer for nanofluids considering the effects of particle migration

A thermal dispersion model is utilized for simulation of convective heat transfer of water-TiO₂ nanofluid for laminar flow in circular tube. Concentration distribution at cross section of the tube was obtained considering the effects of particle migration, and this concentration distribution was applied in the numerical solution. Numerical solution was done at Reynolds numbers of 500 to 2000 and mean concentrations of 0.5 to 3%. Meanwhile, an experimental study was conducted to investigate the accuracy of the results obtained from the numerical solution. Non-uniformity of the concentration distribution increases with raising mean concentration and Reynolds number. Thereby, for mean concentration of 3%, at Reynolds numbers of 500 and 2000, the concentration from wall to center of the tube increases 2.6 and 30.9%, respectively. In the dispersion model, application of non-uniform concentration distribution improves the accuracy in prediction of the convective heat transfer coefficient in comparison with applying uniform concentration.     

Synthesis and characterization of modified ZSM-5 nanozeolite and their applications in adsorption of Acridine Orange dye from aqueous solution

In this research, a novel method was reported for the synthesis of ZSM-5 nanozeolite. The ZSM-5 nanozeolite was modified by transition metals such as nickel, copper and iron. These nanozeolites were characterized using X-ray diffraction, scanning electronic microscopy, Fourier transform infrared and Energy-dispersive X-ray techniques. The synthesized Fe-ZSM-5 nanozeolite has been smaller average particle size than the other nanozeolites. Adsorption behavior of Acridine Orange (AO) onto nanozeolites has been studied in an aqueous medium using UV–VIS technique. The modified nanozeolites have more adsorption efficiency compared to the unmodified ZSM-5 nanozeolite for AO removal. Also, Fe-ZSM-5 nanozeolite was shown higher adsorption efficiency of AO than the other synthesized nanozeolites. Adsorption isotherms were fitted with the Langmuir, Freundlich and D–R models. The kinetic data were investigated using pseudo-first order and pseudo-second order models. The adsorption kinetics of AO on Fe-ZSM-5 nanozeolitewell matched with pseudo-second order kinetic model.     

Microwave Synthesis and Characterization of Spinel-type Zinc Aluminate Nanoparticles

In the present work, ZnAl₂O₄ nanoparticles have been synthesized with the aid of Zn(OAc)₂·2H₂O and Al(NO₃)₃·9H₂O as starting reagents in the presence of microwave irradiation. Besides, the effect of preparation parameters such as microwave power and irradiation time on the morphology and particle size of products was studied by SEM images. The as-prepared ZnAl₂O₄ nanoparticles were characterized extensively by techniques like XRD, TEM, SEM, FT-IR, PL, and EDS. Photoluminescence studies of the ZnAl₂O₄ nanoparticles displayed quantum confinement behavior with band gap of 3.2 eV. The XRD studies showed that pure orthorhombic ZnAl₂O₄ nanoparticles have been produced after calcination.     

Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite

This research explores mechanical and high velocity impact response of hybrid long carbon/glass fiber-reinforced polypropylene thermoplastic composites (HLFT) with different fiber lengths. The work examines three hybrid long fiber thermoplastic composites, i.e., 5, 10 and 20 mm. The HLFTs were prepared by a combination of extrusion and pultrusion processes and using a cross-head die. Tensile and Izod impact tests were carried out to evaluate the mechanical performance of each HLFT compound. A gas gun with a spherical projectile was used to conduct high velocity impact tests at three velocities of 144, 205 and 240 m/s. The results showed that internal mixing operation caused extensive reduction in fiber length of all three LFT lengths. Tensile strength, modulus and Izod impact test results were the indications of higher values with increase in HLFT length. Comparison of these results for the HLFT with that of corresponding glass/PP LFTs, adopted from earlier work by Shayan Asenjan et al. (J Compos Mater 53:353–360, 2019), showed better performance of HLFT. The high velocity impact results showed a steady higher impact performance with the increase in HFLT fiber length for all impact velocities tested. Comparison of HLFT high velocity impact performance revealed better results for all impact velocities tested with that of the corresponding glass/PP LFT composite.