Extracting trust information from security system of a service

The issue of trust is a research problem in emerging open environments, such as ubiquitous networks. Such environments are highly dynamic and they contain diverse number of services and autonomous entities. Entities in open environments have different security needs from services. Trust computations related to the security systems of services necessitate information that meets needs of each entity. Obtaining such information is a challenging issue for entities. In this paper, we propose a model for extracting trust information from the security system of a service based on the needs of an entity. We formally represent security policies and security systems to extract trust information according to needs of an entity. The formal representation ensures an entity to extract trust information about a security property of a service and trust information about whole security system of the service. The proposed model is applied to Dental Clinic Patient Service as a case study with two scenarios. The scenarios are analyzed experimentally with simulations. The experimental evaluation shows that the proposed model provides trust information related to the security system of a service based on the needs of an entity and it is applicable in emerging open environments.     

A new ECG beat clustering method based on kernelized fuzzy c-means and hybrid ant colony optimization for continuous domains

The kernelized fuzzy c-means algorithm uses kernel methods to improve the clustering performance of the well known fuzzy c-means algorithm by mapping a given dataset into a higher dimensional space non-linearly. Thus, the newly obtained dataset is more likely to be linearly seprable. However, to further improve the clustering performance, an optimization method is required to overcome the drawbacks of the traditional algorithms such as, sensitivity to initialization, trapping into local minima and lack of prior knowledge for optimum paramaters of the kernel functions. In this paper, to overcome these drawbacks, a new clustering method based on kernelized fuzzy c-means algorithm and a recently proposed ant based optimization algorithm, hybrid ant colony optimization for continuous domains, is proposed. The proposed method is applied to a dataset which is obtained from MIT–BIH arrhythmia database. The dataset consists of six types of ECG beats including, Normal Beat (N), Premature Ventricular Contraction (PVC), Fusion of Ventricular and Normal Beat (F), Artrial Premature Beat (A), Right Bundle Branch Block Beat (R) and Fusion of Paced and Normal Beat (f). Four time domain features are extracted for each beat type and training and test sets are formed. After several experiments it is observed that the proposed method outperforms the traditional fuzzy c-means and kernelized fuzzy c-means algorithms.     

Optimum topology design of various geometrically nonlinear latticed domes using improved harmony search method

Domes are elegant and economical structures used in covering large areas. They are built in various forms. According to their form, they are given special names such as lamella, network, and geodesic domes. In this paper, optimum topological design algorithm is presented that determines the optimum number of rings, the optimum height of crown and tubular section designations for the member groups of these domes. The design algorithm developed has a routine that generates the data required for the geometry of these domes automatically. The minimum weight of each dome is taken as the objective function. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design–American Institute of Steel Constitution). The optimum topological design problem that considers these constraints turns out to be discrete programming problem. Improved harmony search algorithm is suggested to determine its optimum solution. The design algorithm also considers the geometric nonlinearity of these dome structures. Design examples are presented to demonstrate the effectiveness and robustness of the design optimization algorithm developed.     

Methacrylate-functionalized POSS influence on cross-linking and mechanical properties of styrene-butadiene rubber

Iranian Polymer Journal - The addition of methacrylate-functional polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles to styrene-butadiene rubber (SBR) composites was evaluated in terms of...     

PHOTOCATALYTIC OXIDATION OF ALDEHYDES/PCE USING POROUS ANATASE TITANIA AND VISIBLE-LIGHT-RESPONSIVE BROOKITE TITANIA

We have synthesized an annealed porous aerogel titania (LUAG2), which demonstrates a very high photocatalytic activity for aldehydes and perchloroethylene (PCE) photocatalytic oxidation (PCO) in gas phase under blacklight and fluorescent light irradiation. LUAG2 has a BET surface area of 237 m²/g and a porosity of 0.31 (volume fraction). X-ray diffraction (XRD) analysis shows LUAG2 is nearly pure anatase. It has improved the destruction of PCE and aldehydes as a group by 10-34% with black light compared to Degussa P-25. The optimum water vapor to butyraldehyde molar ratio is around 1/3. LUAG2 also shows better mineralization to CO₂ than Degussa P-25 TiO₂ does. Under irradiation of a 4 W fluorescent lamp LUAG2 gives a consistently higher conversion than that of Degussa P-25. The highly active photocatalyst indicates potential applications in indoor and outdoor environmental pollution control. A visible-light-responsive TiO₂, NTB 200, is also investigated for comparison purposes.     

Grafting of poly(ethylene terephthalate) fibers with methacrylic acid using benzoyl peroxide

The graft copolymerization of methacrylic acid onto poly(ethylene terephthalate) fibers, by the aid of benzoyl peroxide, have been investigated. The graft yield increased up to 85°C, and then decreased with the further increase in temperature. The maximum graft yield was obtained at benzoyl peroxide concentration of 4.0 × 10^?3 mol/L. The increase in the concentration of monomer was found to increase the graft yield. The change in the graft yield was followed by the experiments carried out using different water/solvent mixtures. Also, the change in the properties of polye (thylene terephthalate) fibers grafted with methacrylic acid such as moisture regain, density, and diameter were investigated.     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

Synthesis and characterization of hydroxyl terminated poly(butadiene)-g-poly(glycidyl azide) copolymer as a new energetic propellant binder

Summary Poly(glycidyl azide), PGA, was grafted onto Hydroxyl Terminated Poly(butadiene), HTPB, via free radical mechanism. PGA-macro azoinitator and HTPB polymer mixture was casted from solution and the polymer film was kept at 90°C for 4 hours. The grafted polymer was isolated from the product by fractional precipitation and characterized by NMR and FT-IR spectroscopy. Graft copolymer structure was also confirmed that volume ratio of nonsolvent to the solution of the graft copolymer was between those of corresponding homopolymers. TGA traces of the block polymers were containing two different maxima at 253°C (for PGA units) and 469°C (for HTPB units). Because of the incompatibility of the blocks, DSC curve showed two T_g's which belong to the related segments.     

Mullite for Structural, Electronic, and Optical Applications

Mullite (3Al₂O₃·2SiO₂) is becoming increasingly important in electronic, optical, and high-temperature structural applications. This paper reviews the current state of mullite-related research at a fundamental level, within the framework of phase equilibria, crystal structure, synthesis, processing, and properties. Phase equilibria are discussed in terms of the problems associated with the nucleation kinetics of mullite and the large variations observed in the solid-solution range. The incongruent melting behavior of mullite is now widely accepted. Large variations in the solid solubility from 58 to 76 mol% alumina are related to the ordering/disordering of oxygen vacancies and are strongly coupled with the method of synthesis used to form mullite. Similarly, reaction sequences which lead to the formation of mullite upon heating depend on the spatial scale at which the components are mixed. Mixing at the atomic level is useful for low-temperature (<1000°C) synthesis of mullite but not for low-temperature sintering. In contrast, precursors that are segregated are better suited for low-temperature (1250° to 1500°C) densification through viscous deformation. Flexural strength and creep resistance at elevated temperatures are significantly affected by the presence of glassy boundary inclusions; in the absence of glassy inclusions, polycrystalline mullite retains >90% of its room-temperature strength to 1500°C and displays very high creep resistance. Because of its low dielectric constant, mullite has now emerged as a substrate material in high-performance packaging applications. Interest in optical applications mainly centers on its applicability as a window material within the mid-infrared range.     

Graphite intercalated polymer coatings on stainless steel

The use of graphite modified polymer films has been investigated, on stainless steel. Polythiophene and polypyrrole films have been synthesized electrochemically on stainless steel, and then very thin graphite layers were realized on polymer films. Since the graphite layer is not applicable as a top coat, polymeric top films were also electrosynthesized on graphite layers. Following this procedure, polypyrrole-graphite-polypyrrole and polythiophene-graphite-polythiophene coatings have been obtained on stainless steel. The corrosion behaviours of coated samples have been investigated in 0.1 M H₂SO₄ solution, by means of electrochemical impedance spectroscopy (EIS) and anodic polarization curves. The intercalation of graphite layer altered the performance and properties of coatings significantly. Especially, polypyrrole coating system was found to exhibit almost an excellent coating behaviour that hindered the attack of corrosive environment within 96 h exposure time. The EIS results of polypyrrole coating system were indicating to almost a perfect capacitive behaviour that the response was reflecting capacitive behaviour in a wide frequency region. This property was also examined with successive cyclic voltammograms in a potential range between 0.10 and 0.40 V (vs. Ag/AgCl). The charge densities involved in oxidation and reduction regions were determined for successive cycles and it was shown that coated sample was able to exhibit charge-discharge (i.e. oxidation and reduction) behaviour successfully, without any degradation.