Mechanical and Morphological Studies of Poly(propylene)‐Filled Eggshell Composites

Poly(propylene) (PP) composites were prepared by using eggshell (ES) as filler and their mechanical properties were compared with those using talc (TA) and calcium carbonate (CC) of different grain sizes (X₅₀). A decrease in impact strength and deformation at break with increase in filler content was observed. The PP composite with ES (X₅₀ = 8.4 µm) was stiffer than those with CC (X₅₀ = 0.7 µm). The hybrid composite PP‐ES‐TA showed a similar stiffness as the PP‐TA composites due to the similar morphology of TA (X₅₀ = 0.5 µm) and ES, when TA was replaced up to 75 wt.‐% by ES. SEM study revealed evidence of improved interfacial bonding between PP and ES in theirs composites.

     

Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology

In this study, thermal modeling and finite element simulation of electrical discharge machining (EDM) has been done, taking into account several important aspects such as temperature-dependent material properties, shape and size of the heated zone (Gaussian heat distribution), energy distribution factor, plasma flushing efficiency, and phase change to predict thermal behavior and material removal mechanism in EDM process. Temperature distribution on the cathode has been calculated using ANSYS finite element code, and the effect of EDM parameters on heat distribution along the radius and depth of the workpiece has been obtained. Temperature profiles have been used to calculate theoretical material removal rate (MRR) from the cathode. Theoretically calculated MRRs are compared with the experimental results, making it possible to precisely determine the portion of energy that enters the cathode for AISI H13 tool steel. Also in this paper, the effect of EDM parameters on MRR has been investigated by using the technique of design of experiments and response surface methodology. Finally, a quadratic polynomial regression model has been proposed for MRR, and the accuracy of this model has been checked by means of analysis of residuals.     

Antiproliferative and antioxidative activities of cuttlefish (<Emphasis Type="Italic">Sepia pharaonis</Emphasis>) protein hydrolysates as affected by degree of hydrolysis

Bioactivities (including antioxidative and antiproliferative properties) of cuttlefish mantle protein hydrolysates (CPH) with the degree of hydrolysis (DH) of 20.9, 25.5, 30.6, 35.3 and 40.6% (shortened as 20, 25, 30, 35 and 40%, respectively) prepared using alcalase were evaluated. The results indicated that the CPH with 20, 30 and 40% DH showed the greatest activity against DPPH radical scavenging [5.2 µmol TE (torolox equivalent)/g sample], reducing power (0.4 absorbance at 700 nm) and total antioxidant capacity (0.6 mg ascorbic acid equivalent/g sample), which were 2.5, 6.5 and 13.8 times higher than the cuttlefish mantle protein isolate (CPI), respectively. The CPH with the DH of 20% had the highest effect against MDA-231 and T47D cancer cell lines with growth inhibition of 78.2 and 66.2%, which were 6.5 and 6 times higher activities compared to the CPI, respectively. The amino acid profile of CPH indicated that glutamine (15.7%) and asparagine (10.9%) were predominant.     

A novel algorithm for frequency dependent modeling of ferrite ring and its optimum design to study VFTO behaviors within GIS

One of the fundamental issues in gas insulated substations (GIS) which has destructive effects on GIS equipment is the very fast transient over-voltages (VFTOs). This paper models a 400/230 kV substation in order to study the effects of VFTO extensively implemented on EMTP-RV. In addition, the application of ferrite rings for suppressing VFTOs is assessed thoroughly. The main advantage of this paper is its new proposed algorithm according to the ferrite ring frequency dependent modeling that is validated with experimental results. This paper examines the effects of three compositions of the ferrite ring on VFTO suppression. Moreover, it estimates the dimension of the ferrite ring based on the SF6 gas insulation withstand and the maximum effect of ferrite rings on VFTO suppression constraint with the COMSOL multiphysics software. Furthermore, it gains VFTO attenuated percentages due to the installation of the ferrite ring in different GIS nodes. Finally, it analyzes the offered VFTO amendment technique in various GIS switching scenarios.     

Controlling electron overflow in phosphor-free InGaN/GaN nanowire white light-emitting diodes

We have investigated for the first time the impact of electron overflow on the performance of nanowire light-emitting diodes (LEDs) operating in the entire visible spectral range, wherein intrinsic white light emission is achieved from self-organized InGaN quantum dots embedded in defect-free GaN nanowires on a single chip. Through detailed temperature-dependent electroluminescence and simulation studies, it is revealed that electron leakage out of the device active region is primarily responsible for efficiency degradation in such nanowire devices, which in conjunction with the presence of nonradiative surface recombination largely determines the unique emission characteristics of nanowire light-emitting diodes. We have further demonstrated that electron overflow in nanowire LEDs can be effectively prevented with the incorporation of a p-doped AlGaN electron blocking layer, leading to the achievement of phosphor-free white light-emitting diodes that can exhibit for the first time virtually zero efficiency droop for injection currents up to ~2200 A/cm(2). This study also provides unambiguous evidence that Auger recombination is not the primary mechanism responsible for efficiency droop in GaN-based nanowire light-emitting diodes.     

Numerical Modeling for Hydraulic Resonance in Hydropower Systems Using Impulse Response

An effective numerical method to compute hydraulic resonance in pressurized piping of hydropower systems is presented. For this purpose, the impulse response method is used, i.e., a unit pressure impulse is introduced at the downstream waterway as an exciter. The method of characteristics is used to solve the governing equations for the hydraulic transient and to get the pressure response of the system in the time domain. The discrete Fourier transform is used to compute the frequency response of the system which gives the resonance frequencies in the hydropower plant system. To increase the accuracy of the results, unsteady friction is incorporated into the methodology. The influence of the unsteady friction, wave speed, and power on the pressure response diagram is investigated for the waterway of a multiunit hydropower plant which has been recently installed. Computed results agree very well with those obtained from the standard method of the characteristics.     

Dynamical Study of Pulsed Impinging Jet with Time Varying Heat Flux Boundary Condition

Pulsed jets in different configuration are potentially considered for enhancing transport phenomenon generally. Flow and temperature field in a pulsed impinging jet are simulated numerically by solving the governing equations using the control volume method. Ensemble Averaging Method as well as Phase Averaging has been employed for reporting the results in this study. In order to simulate a pulsating jet, inlet velocity profile was exerted as a time dependent sinusoidal and step signals. The results of this simulation showed an oscillatory jet could lead to an increase in jet development and its cross section with the wall and also a more uniform Nusselt profile would be obtained compared to the steady jet. For parametric investigations and extracting flow and thermal characteristics of a pulsed impinging jet, the effects of various parameters including flow frequency and amplitude and heat flux frequency were considered. It has been seen that Nusselt number varies by the changes in frequency, amplitude and the type of the excitation. It has been shown that the oscillating impinging jet has a better performance rather than the steady case when the excitation amplitude and frequency increase. Finally, it is also observed how a thermal field is going to respond with two pulsating inputs.     

基于进化算法的多目标闭环物流网络设计

为了帮助生产企业建立科学合理的闭环物流网络系统,提高废旧产品材料的再循环利用率,提出了一个多周期、多产品、多阶段的闭环物流网络选址与运输模型。该模型中,不仅考虑建造混合分销回收中心,还提出了2个优化目标:经济成本最小和时间成本最小。针对该多目标优化问题,本文采用了一种基于优先值编码方法的进化算法对模型求解,最终得到该问题的帕累托(Pareto)前沿。通过与约束法的计算结果相比较,求得误差均值小于5%,说明该进化算法对Pareto前沿的拟合程度较好,计算结果是正确有效的。     

Prediction of Gas Flow Through Short and Long 2-D Micro- and Nanochannels Using a Generalized Slip Model

This article reports the outcome of our recent effort in prediction of gas slip flow through micro- and nanochannels. Slip nitrogen flow through short (length to height ratio of 20) and long (length to height ratio of 2,500) microchannels is analyzed and discussed using the spectral element method and the generalize slip model boundary condition of Karniadakis and Beskok. The well-known curvature in pressure distribution, due to the compressible behavior of the gas flow, is observed. Comparison of numerical results with the experimental and direct simulation Monte Carlo (DSMC) data as well as previous reported numerical results showed that the generalized slip model is able to produce reliable results for both short and long microchannels.