Erbium-Ion-Doped Tellurite Glass Fibers and Waveguides—Devices and Future Prospective: Part II

Following on from Part I of this review article that focuses on the suitability of Er³⁺-doped tellurium oxide glass for optical amplification in fiber, this Part II article describes how the fiber gain data were then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources. The gain characteristics and bandwidth of a phosphate modified tellurite waveguide formed on a GaAs substrate are discussed. The limiting structural compatibility of Er³⁺-doped tellurite glass with polydimethylsiloxane polymer for active–passive integration is overcome by adopting a nanoscale super-lattice approach for waveguide engineering.     

Preparation of polypropylene‐based nanocomposites using nanosized MCM‐41 as support and in situ polymerization

MCM‐41 nanoparticles were used for preparing nanocomposites through the in situ polymerization of propylene. The performance of the catalytic system and the final properties of the materials obtained are highly dependent on the methodology used for impregnation of the catalyst onto the support particles, and therefore an optimization study for the impregnation methodology of the catalyst (Me₂Si(Ind)₂ZrCl₂) was carried out. Two different methodologies were used; the results in terms of catalytic activity and polymer molecular masses indicated that the most promising one involved the pre‐activation of the catalyst with the cocatalyst, methylaluminoxane, followed by impregnation onto the MCM‐41 nanoparticles. Thus, an optimized route for the preparation of polypropylene nanocomposites achieving significant improvements in catalyst activity was developed. The nanocomposite materials were characterized by GPC, TGA and DSC. The dispersion state and the size of the nanoparticles incorporated in the polypropylene matrix were investigated by transmission electron microcopy. Additionally, this methodology allows simultaneous control of the desired amount of support and the concentration of catalyst to be used in the in situ polymerization. © 2015 Society of Chemical Industry     

Thermal Stability Investigation of Synthesized Epoxy-Polyurethane/Silica Nanocomposites

Silicon - In this research, epoxy polyurethane-nano silica nanocomposites have been synthesized using an in-situ method, for which SiO2 nanocomposites had been initially ready in N,...     

Two-dimensional spin coating with a vertical centrifugal force and the effect of artificial gravity on surface leveling

This study focuses on an innovative method for spin coating called the two-dimensional (2D) spin coating method. Using a centrifugal force applied by a rotary machine perpendicular to the wafer surface body, a vertical centrifuge force (VCF) was generated. The VCF allowed controllable artificial gravity acceleration to be generated and caused the coating to face this elevated gravity acceleration to adjust and normalize the high and low surface tension stresses. Previous surface leveling mathematics were analyzed and modified. The modified calculations indicate that the effect of additional gravity exerted on the liquid’s surface can reduce the amplitude of surface leveling. To experimentally investigate this phenomenon, a 2D spin coater was designed and manufactured. Higher artificial gravity overcame some common coating defects, such as cloudiness, edge beading, inner layer bubbling, and unsmooth surface leveling. Photoresist (AZP4620) was used as the coating material. The surface roughness was analyzed by atomic force microscopy (AFM) and the layer properties were also imaged by scanning electron microscopy (SEM). The AFM results (average and root-mean-square roughness) indicated a decrease in surface leveling amplitude by increasing the VCF. SEM images showed condensed layers without any porosity or rupture. The experimental results agreed with the simulations and calculated values.     

An Algebraic Algorithm for Microcomputer-Based (Direct) Inverter Pulsewidth Modulation

A new method of direct inverter pulsewidth modulation (PWM) is described. In this technique the pulsewidths are determined by equating the incremental areas of the reference signal with the output pulse areas. This PWM method is compared to conventional methods, such as the natural PWM and the regular PWM, which are based on geometrical constructions. Harmonic analysis shows that the direct PWM method has less harmonic distortion that the other methods. Moreover, this technique is particularly suitable for microprocessor-based implementation since the pulsewidths are computable in real time from simple analytic expressions. It is shown that the output pulsewidths are directly proportional to the reference amplitude and inversely proportional to frequency. Therefore, constant volts/hertz operations and other modes of operation can be implemented very simply with a minimal storage requirement.     

Thermal stability,aging properties,and flame resistance of NR‐based nanocomposite

Polymer/clay nanocomposites have some unique properties due to combination of flame resistance and improved mechanical and thermal stability properties which are important to enhance the material quality and performance. The objective of this work was to investigate the effect of organically modified montmorillonite (org‐MMT) on the thermal and flame retardant as well as hardness and mechanical properties of the nanocomposites based on the natural rubber (NR). It was shown that by the addition of 3 wt % of org‐MMT to NR, its aging hardness rise was decreased more than 55% and the ignition time was delayed about 150%. The reduction in heat release rate peak value was equal to 54% compared to the pristine NR. Addition of org‐MMT improved the thermal stability of the NR. Furthermore, nanocomposites which were calendared before curing showed much more thermal stability and fire resistance than those which contained similar amount of organoclay. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study of the polymerization of 1-octadecene with different rnetallocene catalysts

Summary 1-Octadecene (C18) was polymerized by using different metallocene catalysts. The rac-Et(Ind)₂ZrC1₂/MAO (I) and rac-Me₂Si(Ind)₂ZrC1₂/MAO (III) presented the highest activity as compared with ra-Et(2-Me-Ind)₂ZrCl₂/MAO (II) and Ph₂C(Flu)(Cp)ZrC1₂/MAO (IV) catalysts. Catalyst IV produced polymers with highest molecular weights. The microstructure of the polymers was determined by ¹³C-NMR spectroscopy. Catalyst systems I, II and III produced isotactic polymers while catalyst IV produced polymers with mainly syndiotactic structures but with large amount of stereoregular error. Received: 21 June 2002/Revised version: 4 November 2002/ Accepted: 4 November 2002     

In situ emulsion polymerization and characterization of PVAc nanocomposites including colloidal silica nanoparticles for wood specimens bonding

Polyvinyl acetate (PVAc) nanocomposites for wood adhesives containing different amounts of colloidal silica nanoparticles (CSNs) were synthesized via in situ one-step emulsion polymerization. The adhesion strength of wood specimens bonded by PVAc nanocomposites was investigated by the tensile test. Thermal properties of PVAc nanocomposites were also characterized by differential scanning calorimetry and thermogravimetric analysis. Rheological and morphological properties of the PVAc nanocomposites were investigated using rheometric mechanical spectrometry and field emission scanning electron microscopy (FESEM), respectively. The obtaining results showed that the shear strength of PVAc nanocomposite including 1 wt. % CSNs has the highest shear and tensile strength about 4.7 and 3.2 MPa, respectively. A small increment of T_g (~3 °C) and considerable increment of the ash content proved the enhancement of PVAc thermal characterization in the presence of CSNs. FESEM results showed uniform dispersion of nanoparticles throughout the PVAc matrix due to using the in situ emulsion polymerization process. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48570.     

Experimental and numerical investigation of sands and Geldart A biomass co-fluidization

This article investigated the fluidization of sands and small Geldart A biomass mixtures. The mixture fluidized like Geldart A type particles with a uniform bed expansion regime before bubbling. The video recorded color distance between pure sands and sands–biomass mixtures was used to estimate the sands–biomass mixing. The coarse-grained computational fluid dynamics–discrete element method with a hybrid drag model which couples the Syamlal–O'Brien drag and a filtered drag can capture the mixing while the simulation with Gidaspow drag predicted a segregated bed. The simulations were further validated with experimental measured pressure drops. The time averaged pressure drop equals the weight of the bed material, however, its fluctuation is about three times of the bed material fluctuation.     

Antioxidant Activities of Free and Liposome-Encapsulated Green tea extracts on canola oil oxidation stability

In the present study, green tea extract was encapsulated in liposomes based on the Mozafari method (with no organic solvents) and characterized for its physicochemical properties (encapsulation efficiency, particle size, and Z-potential). Encapsulation efficiency, particles size, and Z-potential were determined to be 51.34, 419 nm, and -57 mV, respectively. Total polyphenol content of the green tea by Folin-Ciocalteu's phenol reagent was measured as 164.2 mg gallic acid/g extract. Free radical scavenging activities of free and liposomal extracts were 90.6 and 93.4%, respectively, using the DPPH method. Antioxidant activity of the ethanolic extract of green tea in free and liposomal forms with concentrations of 200, 600, and 1000 mg L⁻¹ were assessed on oxidative stability of the canola oil at 60 °C for 0, 4, 8, 12, 16, 20, 24, 28, and 32 days. Results were compared to results of synthetic antioxidant butylated hydroxytoluene at 200 mg L⁻¹. To assess antioxidant activity on canola oil stability, peroxide, thiobarbitoric acid, and anisidine values were assessed as well as the total oxidation value and rancimat test. Results showed that the liposomal green tea extract was more effective than the free extract. Furthermore, a 600 mg L⁻¹ concentration of the green tea extract showed a significant antioxidant activity, compared to other extract concentrations. Increasing storage time and various concentrations of the ethanolic green tea extracts included significant effects on canola oil stability (P ≤ 0.05). Results demonstrated that the green tea extract could be used as an effective antioxidant. Free and liposomal extract (at 600 mg L⁻¹) resulted in stronger functionality than the synthetic antioxidant butylated hydroxytoluene.