关于Photoshop插件的SAR图像处理探究

SAR图像处理主要包括相干斑抑制、特征提取等,如果在使用Photoshop插件SAR图像处理图片,将主要精力集中于算法的设计和优化方面,可以尽量减少在用户界面、内存管理和基本的图像操作方面的编程,既可以实现多种图像处理,又容易实现功能的充分扩大与填充,从而在最短的时间内做做多的事。     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

Stability and work hardening of an Fe-12Cr-23Mn austenitic steel

The effect of pre-strain on the strain-induced martensitic transformation of an Fe-12Cr-23Mn austenitic steel has been investigated through transmission electron microscopy and X-ray analysis. Pre-strain was performed either at room temperature or at 200° C. Final strain was carried out at liquid-nitrogen temperature. The phase was shown to form on {1 1 1} planes of the austenite matrix predominantly by overlapping of stacking faults. The martensite transformation sequence was . Nucleation of the phase mainly occurred at intersections of bands. Austenite stability was shown to increase by pre-strain at 25° C or 200° C. Pre-strain at 200° C has a greater effect on austenite stability than does pre-strain at 25° C. The mechanism was discussed in terms of martensite transformation rate and various substructures introduced during straining. Work hardening was shown to depend on the degree of pre-strain and final strain. The correlation between work hardening and substructures introduced during straining was examined.     

耐腐蚀高压柱塞泵用新型双相不锈钢的研究

叙述了新型双相不锈钢－ＷＳＤ钢的组织及其耐蚀性能。试验结果表明，ＷＳＤ钢在氯化物介显示出优异耐蚀性能，其抗点蚀性能远超过Ｃｒ１３，１８－８Ｔｉ，３１６Ｌ等钢种，达到国外Ａｌ－６Ｘ，ＳＡＦ２２０５等钢种的水平。     

Nd：NaR（WO4）2晶体光谱性能研究（R=Bi，Y）

采用提拉法生长出了掺钕钨酸铋钠（分子式Nd：NaBi（WO4）2，简称Nd：NBW）和掺钕钨酸钇钠（分子式Nd：NaY（WO4）2，简称Nd：NYW）晶体。通过TG-DTA分析得到Nd：NBW的熔点为936．2℃，Nd：NYW的熔点为1209．07℃。由吸收光谱可以看出，Nd：NBW在802nm有较强的吸收峰，Nd：NYW在804nm，752nm，586nm附近有较强、较宽的吸收峰，二者均适合于LD泵浦；并计算了晶体中Nd^＋3＋的吸收截面积。通过比较Nd：NBW和Nd：NYW的红外光谱和拉曼光谱结果，认为二者结构基本相同，为四方晶系、白钨矿结构、141/a空间群。     

不同形貌Ga2O3纳米材料可控合成工艺研究

通过研究基片种类、加热温度、保温时间、冷却速度及是否加入催化剂等不同工艺参数对低维Ga2O3，纳米材料形貌的影响，确定出合成5种不同形貌β-Ga2O3纳米材料的工艺条件。场发射扫描电镜（FE-SEM）表明5种不同形貌α-Ga2O3纳米材料分别为纳米线、纳米棒、纳米带、纳米环及纳米片。X射线衍射（X-ray）分析结果表明不同形貌纳米材料均为晶格常数日=1．223nm，b=0．304nm，c=0．58nm，a=90°，β=103．7°，γ=90°的单斜晶系β-Ga2O3晶体。     

不等厚板过渡削薄对接焊缝的超声波探伤

不等厚板经过渡削薄处理后的对接焊缝,由于厚度的不均匀,射线穿透时的衰减不一样,对射线检测带来很大的麻烦。常用的超声波探伤方法在定位和定级方面比较困难,本文给出利用现在先进的数字式超声波探伤仪进行准确探伤的方法。     

粉煤灰填充尼龙6浇铸制品的研究

将粉煤灰用硅烷偶联剂处理后填充到尼龙6浇铸制品(MC尼龙)中,可以改善制品的吸水性、收缩率及热稳定性等,还可以降低成本。该项研究结果有很大的实用价值。     

Simulation of the tubular positive electrode of the lead-acid battery

The discharge performance of a tubular electrode of the lead-acid battery based on a pseudo steadystate approach was simulated. It was found that the discharge reaction started from the central interior region instead of from the outer surface as in the usual plate-type electrodes. This is due to the fact that the central region has a smaller reaction surface than the outer region of the tubular electrode. This consequently causes a higher current density near the center. A comparison of the theoretical prediction and experimental result shows that the model is fairly accurate except for very high rate discharge conditions.     

在OsO_4催化作用下烯烃的立体选择性氧化反应

四氧化锇是一种贵而毒性大的试剂。本文介绍催化剂量的四氧化锇在立体选择性高的烯烃氧化反应中的应用，为四氧化锇在有机合成中的应用，开辟了新的途径。